energenie EG-UPS-PS2000-01, EG-UPS-PS3000-01 Pure Sine Wave UPS LCD Display USB User Manual

energenie EG-UPS-PS2000-01, EG-UPS-PS3000-01 Pure Sine Wave UPS LCD

Display USB

Features

EG-UPS-PS2000-01 (EG-UPS-PS3000-01)

• Uninterruptable power supply with pure sine wave output
• USB interface
• Automatic AC voltage regulation (AVR)
• Intelligent overload- and short-circuit protection
• Audible and visual alarms
• LCD display and LED status indication
• Internal battery with overcharge and over-discharge protection

Specifications

EG-UPS-PS2000-01 (EG-UPS-PS3000-01)

• Type: line interactive
• Waveform: sine, 5% distortion at linear load, PF > 0.8 (on battery)
• Input: AC 220V±25%, 50Hz/60Hz ±10%
• Output: AC 220V±12%, 50Hz/60Hz ±1% (AC 220V±5% at inverter mode)
• Switching time: u to 10 ms
• Backup time: 10…30 mins (depends on the load)
• Battery: 151 x 65 x 94 mm, sealed lead-acid 12V/9Ah, F2 terminals x 3 pcs (4 pcs for EG-UPS-PS3000-01)
• Charge time: up to 12 hours
• Sockets: C14 input, 4 outputs x C13; USB-BF connector
• Operating conditions: 0°C~40°C, at humidity 10~90%RH non condensing
• Power: 2000VA (1600 W) (3000VA (2400 W) for EG-UPS-PS3000-01)
• Charging current: up to 1.2 A (up to 1.7 A for EG-UPS-PS3000-01)
• Noise: < 50 dB at 1 m distance
• Dimensions: 412 x 215 x 144 mm (467 x 336 x 190 mm for EG-UPSPS3000- 01)
• Product weight: 18.5 kg (28.1 kg for EG-UPS-PS3000-01)

FUNCTIONS AND OVERVIEW

Press the setting interface for 5 seconds to restore factory settings and exit the setting interface.

| Press “  ” momentarily to enable the inverter mute.

In the utility power mode, press “   ” momentarily to enable the battery discharge testing for 15 seconds.

| Press the key for 5 seconds to enter the setting interface.

Press the key momentarily in the setting interface to turn the page.

Press the key for 3 seconds to exit the setting interface without saving data.

Select the item to be set in the setting interface. After selecting the required setting, page down to “save and exit” page. Choose “Yes”, press “   ” momentarily to save the date and exit the setting mode.

In non-setting mode, momentarily press the key twice, and the LCD display content rotates.

In setting mode, when it goes to the SAVE page, press “ ” or “ ” momentarily, choose “Yes”, press “ ” to complete the setting and exit the mode.

| In non-setting mode, press the key momentarily to turn the page (page up).

In setting mode, the parameter decreasing iterates.

| In non-setting mode, press the key momentarily to turn the page (page down).

In setting mode, the parameter decreasing iterates.

In non-setting mode, press the key for 2 seconds to enter the state of the automatic page up/down and re-press the key for 2 seconds to exit the state of the automatic page up/down.

This product is tested and complies with the essential requirements of the laws of member states concerning LVD(2006/95/EC), EMC(2004/108/EC). The CE declaration can be found under www.gembird.eu

WARNING

Waste disposal

Do not deposit this equipment with the household waste. Improper disposal can harm both the environment and human health. For Information about waste collection facilities for used electrical and electronic devices, please contact your city council or an authorized company for the disposal of electrical and electronic equipment.

WARRANTY CONDITIONS

The receipt must clearly list the date of purchase and the part number, in addition it should be printed. Keep the receipt for the entire warranty period since it is required for all warranty claims.

During the warranty period the defective items will be credited, repaired or replaced at the manufacturer’s expense. Work carried out under the warranty neither extends the warranty period nor starts a new warranty period. The manufacturer reserves the right to void any warranty claim for damages or defects due to misuse, abuse or external impact (falling down, impact, ingress of water, dust, contamination or break). Wearing parts (e.g. rechargeable batteries) are excluded from the warranty. Upon receipt of the RMA goods, Gembird Europe B.V. reserves the right to choose between replacement of defective goods or issuing a credit note. The credit note amount will always be calculated on the basis of the current market value of the defective products.

WARRANTY CARD

1. Warranty service is provided within of the warranty period, if there is a correct and clearly completed warranty card, and the product is complete. The serial number and model of the product must match specified in the warranty card.
2. Warranty service is free elimination of all problems (repair), or replacement of the product with a new (similar).
3. The warranty does not cover defects, caused by the following reasons:
   • use of the product for purposes other than those intended.
   • violation of the conditions of operation, storage or transportation products listed in this manual.
   • connection of non-standard or defective peripherals devices, accessories.
   • mechanical damage, penetration into the product foreign objects, substances, liquids, insects.
   • repair of the product by unauthorized persons.
4. Completeness and appearance of the product are checked By the buyer upon receipt of the goods in the presence of personnel firms. After-sales claims for completeness and appearance are not accepted.

• Product name: ___
• Model: ___
• Serial number: _____
• Guarantee period: ___
• Date of sale “____” ___ 
• Selling company: _____
• Address and phone number of the seller: __
• M.P. I have read and agree to the terms of the warranty: _____
• Seller buyer: _____

Gembird Europe B.V.

• Wittevrouwen 56, 1358CD Almere, The Netherlands
• www.gembird.nl/service
• [email protected]

All brands and logos are registered trademarks of their respective owners

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>