ORCA 0-0202 Display 2 User Guide
- June 9, 2024
- ORCA
Table of Contents
Quick Start Guide
Powered by Android™
0-0202 Display 2
Preface
Dear users:
Thank you for purchasing the product. We provide you with the Quick Start
Guide in order to use the product more easily. Please read it carefully The
Quick Start Guide is applicable to this Android device. The guide introduced
the basic functions and normal functions of Android system. Any difference,
please refer the reality as standard. Welcome to contact us if you have any
Inquires for the guide or product when you use it.
Desktop initiaiization and Application
-
1nItlal page
Lock screen interface slide up to unlock, as below picture. -
1nItlai desktop
Slide the STOW up and go to the desktop, as below picture. -
Menu bar layout
-
Desktop menu Introduction:This interface can startthe application in a quick way,enter the menu operation,users can add shortcutstothedesktop according tothair own naeds,as below picture.
-
Menu bar layout: All the application and user installation applications a r rehere,and all applications can be opened,as below picture.
-
System setting
The usercan set upthe system on this interface. -
Wi-Fi setting
I n this interfac:a can search Wi-Fi.input password can be connected.under the advanced settings can be connected to the WLA\N directly, WLAN sleep state setting. -
Biuetooth setting
Search this interface for Bluetooth pairing,remove or cancel paired Bluetooth devicas,as the below fricture. -
Data traffic setting
Set up datatraffic switch when connectingtomobile network, monitorthe usiage of application traffic. -
More setting
Turn on and offflight mode, switch on NFC,set network sharing with convenient hot spot, VPN settings, nianually or automatically search mobile network,Ethernet configuration. -
Display setting
Brighti prep sleep time setting, in screen saver. font size,screen rotation switch,etc. -
Prompt tone and notification settings
Set media volume,alarm volume, notify volume size (can also use physical keys to the corresponding interface directly to adjust,do not disturb settings ) notification ringtone settings and other operations. -
Storage setting
View system memory usage, install and uninstall SD cards. -
Battery settings
Check battery usage. -
User settings
Users can add or delete accounts. -
Location information
Turn on or off the GPS,or restrict an application to use to obtain location information. -
Securlty settings
Set screen locking mode with some encryption settings,can manage unknown sources of application installation settings ,etc. -
Language and input method settings
Set display language and input niethoditext to voice, mouse/touch panal(pointer speed)etc. -
Backup and reset settings
Do data backup and restore factory settings,restore factory settings will clear all content,please be careful. -
Date and time settings
Set the time and timazone and tima format for 24 hoursor 12 hours,or turn on automatic confirmation, which synchronizes automatically when the device is connacted to the network. -
Accessibility
Click with accessibility,for quick settings of oersonal operation habits,such as:Caption, magnification gesture,front size,display size,power button ends call,auto-rotate screen,speak password,cojor inversion,color correction. -
Printing
You can printthe picture or file. -
Status Information
View battery status,battery power SIM card status/iMEI information / I P Soa MAC address, bluetooth address, serial number.boot time, etc.
Use warnings:
@wWith thewrongtype ofbattery replacementwill be expl osive danger, be sure to
use the original battery.
@The company shall not takeany responsibility for the lossor removal of the
information inthe tablet, which iscau sedby the operation, malntenance orother
accidents of th
@ non-normal operation of the software and hardware.
@Please backup your important information at any time.
@Please do not disassemble the tablet; otherwise it will ose the right to
guarantee.
@®Adapter description:
INPUT:
OUTPUT:
Manufiacturer’s Name: Orca Technologies AS
Address: Tordenskiolds gate3, 0160 Oslo, Norway
Product name: Orca Display2
Model number: 0-0202
Operating Temperature: – 20°C to 6 0 ° C
This device was tested for typical body – worn operations. To comply with RF
exposure requirements, a minimum separation distance of Omm must be maintained
between the user’ sbody and the handset, including the antenna. Third –
partybelt – clips, holsters, and similar accessories used by this device
should not contain anymetalli ccomponents. Body – worn accessories
thetdonotmeet these requirements may not comply with RF exposure requirements
and should be avoided. Use only the supplied or an approved antenna.
Specific Absorption Rate (SAR) information:
This Orca Display 2 meets the government’s requirements for exposure to
radio waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health. FCC
RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: Orca Display 2 has also been
tested against this SAR limit. This device was tested for typical body-worn
operations with the back of the Orca Display 2 kept 0mm from the body. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain an 0mm separation distance between the user’s body and the back of
the Orca Display 2. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of accessories
that do not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.
Manufacturer’s Narne:Orca TechnologiesA5
Address: Tordenskloldsgate3, 0160 Oslo, Norway
Product name : Orca Display 2
Model number: 0-0202
FCC ID: 2A799-0-0202
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by theparty responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmfulinterferencein a residential installation. This equipmentgenerates,
uses andcan radiate radio frequency energyand, if not installed and used in
accordance with the instructions, may cause harmful interference to radio com
muricat ions. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio ortelevision reception, which canbe determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorientor relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment in toan outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device hasbeen evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition withoutrestriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>