Kingsman OFP42SS Optional Stainless Steel Surround User Manual
- June 9, 2024
- Kingsman
Table of Contents
OFP42SS Optional Stainless Steel Surround
User Manual
A Stainless Steel Surround is available as an option for the OFP42N/OFP42LP.
(Install before finishing with decorative material on facing of enclosure.)
OFP42SS Parts List
| ITEM NO. | PART NUMBER | DESCRIPTION | Quantity |
|---|---|---|---|
| 1 | 420FP-108-SS | DEFLECTOR HOOD | 1 |
| 2 | 420FP-SS | Access Panel | 1 |
| 3 | 420FP-330-SS | Firebox Ledge Cap | i |
| 4 | 420FP-331-SS | Bottom Cover | 1 |
| 5 | 420FP-332-SS | SS Surround left Side | 1 |
| 6 | 420FP-332R-SS | SS Surround Side Right | 1 |
| 7 | 420FP-333-SS | SS Surround Top | |
| 8 | No. 6-.375-SML | #6 SS screw | 5 |
Part 1: Preparing the Fireplace
- Remove the 2 DT Screws inside the Firebox Top and remove the Deflector Hood from the top of the unit.
- Lift Access Panel and remove.
Set these 2 items aside as they will be replaced by parts of the Surround.
Remove Access Panel Brackets by removing DT Screws. These Brackets will be reused with the Surround.
Part 2: Installing the Surround
(See Surround Drawing above for reference.)
- Place Firebox Ledge Cap (3) and Bottom Cover (4) into position on the Fireplace.
- Slide Surround Top (7) onto Surround Sides (5&6). Place Surround Top and Sides onto fireplace.
- Insert Screws into holes in the inside edge of the Surround Top, and into Sides just above the Curtain Rod.
Replace the Deflector Hood and Access Panel removed in Part 1 with the Stainless Steel Surround parts.
WARNING:
Failure to position the parts in accordance with these diagrams or failure to
use only parts specifically approved with this appliance may result in
property damage or personal injury.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>