ATLONA AT-OME-EX-TX-WP Omega 4K or UHD Wallplate Transmitter for HDMI Installation Guide

ATLONA AT-OME-EX-TX-WP Omega 4K or UHD Wallplate Transmitter for HDMI

The Atlona AT-OME-EX-TX-WP is an HDBaseT transmitter for video up to 4K/60 4:2:0, plus embedded audio, control, and USB over distances up to 330 feet (100 meters). It features a US one-gang, Decora®-style wallplate form factor, and includes interchangeable black and white wallplates and faceplates. Part of the Omega™ Series of integration products for modern AV communications and collaboration, the OME-EX-TX-WP is HDCP 2.2 compliant and transmits RS-232 control signals. With a matching HDBaseT receiver, the integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing and touch or interactive displays. The OME-EX-TX-WP includes a USB 2.0 host interface for a PC, plus a peripheral device such as a speakerphone, microphone, or keyboard and mouse. This transmitter is ideal for use with Omega Series receivers as well as switchers with HDBaseT inputs.

Package Contents

• 1 x AT-OME-EX-TX-WP
• 1 x White faceplate
• 1 x White RS-232 cover
• 1 x White wallplate
• 1 x Black faceplate
• 1 x Black RS-232 cover
• 1 x Black wallplate
• 4 x Mounting screws (2x course thread, 2x fine thread)
• 1 x 3-pin captive screw connector
• 1 x Installation Guide

IMPORTANT : Visit http://www.atlona.com/product/AT-OME-EX-TX-WP for the latest firmware updates and User Manual.

The AT-OME-EX-TX-WP is not compatible with the AT-UHD-HDVS-300 system for extending USB.

OVERVIEW

1. HOST
   Connect a USB cable from the computer to this port.

2. RS-232
   Connect an RS-232 control system to this port. Connect the included 3-pin captive screw block to this receptacle. Refer to RS-232 (page 3) for more information. Note that this port is covered by a plate and must be removed to expose the RS- 232 port.

3. DEVICE
   Connect a USB device, such as a speakerphone, to this port. This port provides 2.5 W of power.

4. PWR
   This LED indicator glows solid green when the unit is powered. Refer to LED Indicators (page 6) for more information

5. HDMI
   Connect an HDMI cable from this port to a UHD/HD source.

6. LINK
   This LED indicator glows solid amber to indicate that the HDBaseT signal integrity is good. Refer to LED Indicators (page 6) for more information.

7. HDBaseT OUT
   Connect a category cable from this port to the HDBaseT IN port of the AT-OME- EXRX or other PoE-compatible receiver.

RS-232

The AT-OME-EX-TX-WP provides an RS-232 port which allows communication between a control system and an RS-232 device. This step is optional.

1. Gently remove the RS-232 cover from the faceplate using the tip of a small regular screwdriver.
2. Use wire strippers to remove a portion of the RS-232 cable jacket.
3. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires.
4. Insert the TX, RX, and GND wires into correct terminal using the included 3-pin captive screw connector.
5. Connect the opposite end of the cable to the control system.

NOTE : Typical DE-9 connectors use pin 2 for TX, pin 3 for RX, and pin 5 for ground. On some devices functions of pins 2 and 3 are reversed.

Faceplate Removal and Assembly

Removal of the faceplate requires that the AT-OME-EX-TX-WP be disassembled from the electrical box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate.

1. Unscrew the four Phillips-head screws from the sides of the faceplate, as shown:
2. Gently remove the faceplate by pulling it toward you.
3. Attach the new faceplate, then secure it using the four Phillips-head screws. Do not overtighten or apply high-torque devices to the screws. Doing so may damage the faceplate and/or the screws.
4. Install the AT-OME-EX-TX-WP into the electrical box or mud ring.
5. Reattach the wallplate.

Installation

1. Connect an HDMI cable from the UHD/HD source to the HDMI port.
2. OPTIONAL : Connect a USB cable from the host computer to the HOST port.
3. OPTIONAL : Connect a USB device, such as a speakerphone to the DEVICE port. This port provide 2.5 W of power.
4. Connect a category cable, from the HDBaseT OUT port on the rear of the transmitter, to the HDBaseT IN port on the receiver.
5. OPTIONAL : Connect an RS-232 cable between a control system and the RS-232 port on the transmitter. Refer to RS-232 (page 3) for more information.

Cable Recommendation Guidelines
Refer to the tables below for recommended cabling when using Altona products with HDBaseT. The green bars indicate the signal quality when using each type of cable. Higher-quality signals are represented by more bars.

IMPORTANT : Stranded or patch cables are not recommended due to performance issues.

Atlona recommends TIA/EIA 568-B termination for optimal performance.

LED Indicators

The PWR and LINK LED indicator on both the transmitter and receiver unit provides basic information on the current status of the AT-OME-EX-TX-WP.

Updating the Firmware

Requirements:

• AT-OME-EX-TX-WP
• Firmware file
• Computer running Windows
• USB-A to USB-B cable

NOTE: The update process can take up to five minutes to complete

1. Disconnect power from the unit.
2. Remove the faceplate to access the hidden “firmware update” button, located above the PWR LED indicator. Refer to Faceplate Removal and Assembly (page 4) for more information
3. Connect a USB-A to USB-B cable between the PC and the HOST port on the unit.
4. Simultaneously press and hold the firmware update button, while reconnecting the power. The PWR LED indicator will be blinking green
5. The USB UPDATE folder will be displayed. If this folder is not displayed, automatically, select the USB UPDATE drive from Windows Explorer
6. Delete all files from the USB UPDATE drive, if any are present.
7. Drag-and-drop the firmware file to the drive.
8. The PWR LED indicator, on the front panel, will flash green while the unit is being updated. Do not disconnect the USB cable during the update process. When the PWR LED stops flashing and is solid green, the update process will be complete.

Warranty

To view the product warranty, use the following link or QR code: https://atlona.com/warranty/.

English Declaration of Conformity

The English version can be found under the resources tab at: https://atlona.com/product/at-ome-ex-tx-wp/.

Chinese Declaration of Conformityhttps://atlona.com/about-us/china- rohs/

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administrator, Inc.

US International

• atlona.com
• 408.962.0515
• 41.43.508.4321

© 2022 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.

References

• Atlona® AV Solutions - Commercial & Residential
• 4K/UHD HDMI Over HDBaseT Transmitter with USB, Control, and PoE
• 4K/UHD HDMI Over HDBaseT Transmitter with USB, Control, and PoE
• Warranty - Atlona® AV Solutions – Commercial & Education

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>