PARKVISION PRO109 Flexible Mounting Car Reversing Camera User Manual

USER MANUAL

Flexible Mounting

Car Reverse Camera

Warm Reminder:

We suggest that you do a fast test of the camera on a DC12V power before installation. The user manual is also available in English, Deutsche, français, italiano, Español, Nederlands language, please contact us for an electronic PDF format copy if you need.

All products in the PARKVISION store has a quality[12-month] guarantee from the date of purchase. Any problems found or you need help, please contact us immediately on Buyer Center or write us an email, and our service team will answer within 24 hours.

Email:service-eu@parkvision.com.cn
Facebook ID: Parkvision EU

PRECAUTIONS

Please read it carefully to avoid unnecessary damage.

• This camera is designed to use on vehicles with DC 12V power. It cannot be connected to power beyond DC 9-16V range, otherwise it may cause damage or malfunction.
• Please connect all wiring correctly according to the wiring diagram, in case of there may be a short circuit, no image display or damage to the vehicle.
• When wiring, please make sure to avoid high temperature parts such as engine and exhaust pipe to avoid damage of wire and interference. If there are streaks or snowflakes in the image, it is recommended to add a camera signal filter to reduce image interference.

PRODUCT PARAMETER

model SW-115S/SW-115SW Horizontal 142°±5°; vertical 105°±5°
Operating Temperature Range| -20℃ ~ +65℃
Storage Temperature Range| -30℃ ~ +80℃

PACKAGE CONTENTS LIST

Model PAL-120 Camera| Model SW-115S Camera| Model SW-115SW Camera
---|---|---
1Camera (1m/3.2ft)| 1Camera (1m/3.2ft)| 1Camera (1m/3.2ft)
1Power Cable (1.5m/4.8ft)| 1Power Cable (1.5m/4.8ft)| 1Power Cable (1.5m/4.8ft)
1RCA Cable (6.5m/21.3ft)| 1RCA Cable (6.5m/21.3ft)| 1RCA Cable (6.5m/21.3ft)
2Gaskets| 2Gaskets| 2Gaskets
1Nut| 1User Manual | 1User Manual
1Double Tape| |
1*User Manual | |

INSTALLATIONS-UND SCHALTPLAN

1. Power cable
2. Camera connector
3. RCA video cable
4. Output to Monitor
5. Black (ground – )
6. Red (DC12V + )
7. to vehicle’s reverse light power
8. RCA Video Cable With Trigger Wire
   This two trigger wires are especially used for double din head unit/monitor with backup trigger signal input.
   A. One end to car reverse light
   B. the other end to double din head unit/monitor backup trigger signal input,

*For compatibility reasons, it is not recommended to connect this camera to any driving recorder or dash cam mirror.

ADJUSTABLE MOUNTING ANGLE

Note: To achieve best view angle, if necessary, you can use the rubber gasket(s) supplied in the box to adjust the view angle by upwards or downwards by 5 to 10 degrees.

SWITCHING OPTIONS

Note: The camera is equipped with CVBS-PAL signal format. By default, it is also equipped with parking line image. If the screen only supports CVBS- NTSC signal format, or needs to reverse the image for installation. Or if you don’t want to see a stop line, you can change the arrow according to the following instructions.

PAL-120
Purple ring: switch from PAL to NTSC.
Blue Loop: Cut to reverse the image for downward editing.
White loop: cut off to disable the stop line.

SW-115S/SW-115SW
White socket: unplug and switch from PAL to NTSC. Blue Loop: Cut to reverse the image for downward editing. White loop: cut off to disable the stop line.

remarks:
1. Please restart the camera to complete the switch.
2. If the wire ring is cut incorrectly, it can be recovered by stripping both ends and reconnecting the wire core.

TROUBLESHOOTINGS

Issue|

Causes and Solutions

---|---
No image/black screen | 1. Please make sure you are using the cables that came with the camera,which can not used with other cameras’ cables.
2. Please make sure your radio can be compatible with CVBS-PAL signal format, has RCA video connector(CVBS-NTSC signal format need to be switched).
3. Please check your wiring diagram whether has loose or incorrect wiring, whether the wrong Video Input is used.
4. The most direct and effective way is to do a camera test, connect the camera to an independent display screen (such as a TV screen, computer screen, 5-inch display screen, etc.), and use the DC 12V constant power supply to power on to check whether the displayed picture is normal
Unclear image/blurry image| 1. Please make sure the camera lens film is removed.
2. Check whether there is dust on the camera lens, wipe the camera lens with a soft cloth.
3. The influence of interference. When wiring, please keep this product away from devices that cause interference or you can add a camera signal filter.
Does not work after a period of use | 1. The wires maybe clamped or squeezed, causing the wires to break or make poor contact.
2. Check if the camera lens entered water or has mist inside.
3. Do a camera test by yourself first to eliminate the cause, if necessary, please contact us directly.

* Tips: In rainy and snowy weather, please pay attention to cleaning the camera casing with clean water in time to avoid corrosion and paint peeling.

Documents / Resources

| PARKVISION PRO109 Flexible Mounting Car Reversing Camera [pdf] User Manual
PRO109 Flexible Mounting Car Reversing Camera, PRO109, Flexible Mounting Car Reversing Camera, Mounting Car Reversing Camera, Car Reversing Camera, Reversing Camera, Camera
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>