SCOORNEST SC009 Smart WiFi Camera User Manual
- June 9, 2024
- SCOORNEST
Table of Contents
Smart WiFi Camera
User Manual
SC009 Smart WiFi Camera
Thank you for purchasing Smart Camera. Get started using your new devices by downloading SmartLife, one convenient app that manages everything straight from your phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips
What’s in the Box
- Smart Camera x1
- USB Cable x1
- User Manual x1
- 3M Adhesive x1 *
- Adapter x1 *
*: Different products have different accessories, please refer to physical packing.
Get Ready
- Know your Wi-Fi network and password
- Make sure your mobile device is running IOS® 11 or higher or Android-cm 6.0x or higher
- Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to 5GHz networks)
1. Download the SmartLife app from App Store or Google Play. 2. Register an account on your SmartLife app
| STEP 1.
Enter your mobile phone number or email address
---|---
| STEP 2.
Enter the verification code and create a password.
3. Plug in
How do I reset my device?
- Press the Reset Button (as Pic 1) for several seconds until camera starts to beep
- Optional: Insert Micro SD card as shown in Pic 2.
4. Add device
- Open SmartLife APP, click ‘+’ on the top right corner of the page ‘HOME’. then Select “Smart Camera”.
- Make sure the indicator light on the device Is flashing red quickly, then press ‘Next Step′.
- Enter your “Wi-Fi network and password”, click ‘OK’.
- Read the instruction about ‘Scan with the camera’. click ‘Continue’. a{“s”:”Tuya-Test”,”p”:”Tuya.140616″,”t”:”AYIuLy6Ygi1eg5″}
- Scan the DR Code on your phone with camera. Heard a prompt tone, click ‘Heard the beep’,
- When the indicator light on the device turns from flashing red light to steady green fight, the network configuration is complete.
*Please refer to the specific APP interface if there are any difference.
Frequently Asked Questions
1. Can I share with family and friends?****
– Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, press the Profile button and dick on the ‘Home Management’ button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account.
2. What’s the Wireless Range?****
– The range of your home Wi-Fi is heavily dependent on your home router and
the conditions of the room.
– Check with your router specifications for exact range data.
3. How many cameras can I control?****
– SmartLife app can control an unlimited amount of devices in an unlimited
amount of locations.
– Your router may have a limit of how many devices can be connected to one
router.
4. My device can’t be connected to network with App****
– Make sure the device is under the config status (indicator light is flashing
quickly)
– Make sure the WI-Fl Is available and not too far away from router
– Make sure the Wi-Fi password you input is correct
5. My device shows offline in my App****
– Make sure the device is powered on
– Make sure the network is stable and the Wi-Fi name and password not
modified. If not, add device again.
– If the network is normal, but it’s still offline. Check if there are too
many Wi-Fi connections. You can restart your router to check the status of the
device,
Installation instructions
Make sure the base of the device is dry and flat. Tear off one side of the 3M glue tape and paste it on the base of the device. Please pay attention to the sticking position, ensure that the 3M glue tape is in full contact with the base, and press hard to ensure that it Is firmly pasted. Clean the installation area. Tear off the other side of the 3M tape, and paste it on the installation area. Press firmly to ensure that it is firmly pasted.
- You can find much more useful information in the Help Center on App.
- It is recommended that the device be installed at a height below 2M.
- Operating temperature -10 ∼ 45ºC , Operating humidity ≤95%
- Frequency Range: 2.412∼2.462GHz, RF Output Power: 17.5 dBm
Technical Specifications
- Audio: Internal Speaker and Microphone
- Storage: supports up to 128G Micro SD card (not inducted)
- W-Fi: IEEE 802.11bigin, 2.4GHz(not compatible with 5G142 W-Fi networks)
- Power: General 5V Direct Current 1A, symbol ” ****” means direct arrant
Warning
Federal Communications Commission (FCC) Declaration of Conformity
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance Could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and: if not instated and used in accordance
with the instructions: may cause harmful interference to radio communications,
However, there is no guarantee that interference will not occur in a
particular instalation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna,
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure imits set forth for an
uncontrolled rolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your body.
Important Note
This radio module must not installed to co-locate and operating simultaneously
with other radios in host system except in accordance with FCC multi-
transmitter product procedures. Additional testing and equipment authorization
may be required to operating simultaneously with other radio. The availability
of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
The host product manufacturer is responsible for compliance to any other FCC
rules that apply to the host not covered by the modular transmitter grant of
certification. The final host product still requires Part 15 Subpart B
compliance testing with the modular transmitter installed. The end user manual
shall include al required regulatory information/warning as shown in this
manual, including: This product must be installed and operated with a minimum
distance of 20 cm between the radiator and user body.
Declaration Of Conformity European Notice
**** Hereby, Ningbo Lingzhu Technology CO., Ltd. declares that this product
is in compliance with essential requirements and other relevant provisions of
Directive 2014/53/EU,2011/65/EU.
This product must not be disposed of as normal household waste, in accordance
with EU directive for waste electrical and electronic equipment (WEEE-
2012/19/EU). Instead, it should be disposed of by returning it to the point of
sale, or to a municipal recycling collection point.
The device could be used with a separation distance of 20cm to the human body.
Please read the instruction manual carefully before using the product.