GREE SAP09HP230V1A Wall Mount Ductless Air Conditioning and Heating System User Manual
- June 9, 2024
- Gree
Table of Contents
QUICK-START GUIDE
(Before opening cover) (After opening cover)
INDOOR UNIT FRONT PANEL DISPLAY: Look here for LED display of system status, setpoint and indoor temperatures and malfunction codes.
WALL MOUNT DUCTLESS AIR CONDITIONING AND HEATING SYSTEM
SAP09HP230V1A SAP12HP230V1A
SAP18HP230V1A SAP24HP230V1A
NOTE: Please read the complete Owner’s Manual carefully before operation.
-
ON/OFF Button
Press to power the unit on or off. -
FAN Button
Press to select fan speed (Ultra-Low, Low, Low-Medium, Medium, Medium-High, High or Turbo). -
MODE Button
: HEAT : DRY : FAN ONLY
: COOL : AUTO -
+/- Buttons
Press to either raise or lower settings including temperature and time. -
TURBO Button
Press to boost cooling or heating airflow. Quickest way to reach preset temperature. -
Button
Press to control horizontal angle of louvers and to redirect airflow. -
Button
Press to control vertical angle of louvers and to redirect airflow. -
CLOCK Button
Press to display time of day or time remaining on timer. -
TIMER ON/TIMER OFF Buttons
Press to start or stop the timer. (Adjust with “+” and “” buttons.) See Owner’s Manual for more details. -
TEMP Button
Press to select temperature setting. -
I FEEL Button
Press to activate; allows unit to sense temperature at the remote controller in Cool or Heat mode. -
LIGHT Button
Press to turn on lights on the unit’s Front Panel Display. Press again to turn off. -
X-FAN Button
Automatically runs fan after unit is turned off to remove moisture from coil. -
QUIET Button
Press to activate in Heat or Cool mode; after the room reaches its set temperature, the system operates discreetly at Low fan speed. -
SLEEP Button
Press to select one of three SLEEP modes, each offering varying levels of comfort control while sleeping. See Owner’s Manual for more details.
KEY FEATURES & FUNCTIONS
SMARTPHONE CONTROL
Built-in intelligent WIFI capability and Smart Control function allows you to
operate the unit with standard Android or iOS smartphones. See Owner’s Manual
for more details.
MULTI FAN SPEEDS
Whether operating in either Cool or Heat mode, the indoor fan can be set to
your choice of seven different speeds (Ultra-Low, Low, Low-Medium, Medium,
Medium-High, High or Turbo) to achieve maximum comfort.
DRY MODE
During warm humid conditions, selecting this mode will increase moisture
removal in your room for added indoor comfort. Fan speed cannot be adjusted in
Dry Mode.
X-FAN MODE
In humid areas, this Dry Coil function allows indoor fan to run for a pre-
determined time after unit is turned off (in Cool or Dry modes) to ensure that
additional moisture is removed from coil.
POWER FAILURE FUNCTION
Your settings and parameters are stored in non-volatile memory and are
retained during a power failure.
I FEEL MODE
This function senses the temperature at the remote controller instead of at
the indoor unit in Cool or Heat mode. It then adjusts airflow and temperature
accordingly for the ultimate in personal comfort control and energy savings.
SLEEP MODE
Choose one of three selectable sleep cycles to automatically adjust room
temperatures during your sleep time to maximize comfort and reduce utility
bills.
INTELLIGENT PRE-HEATING
In Heat mode, the system delays fan activation until the coil has warmed up to
prevent blowing uncomfortable cool air into the room.
SELF-DIAGNOSIS
The built-in computer uses real-time diagnostics to continuously scan for
errors or malfunctions. Fault codes are shown on the unit display to
facilitate troubleshooting.
FAQs
Why does the fan continue to run even when the unit is not cooling or heating?
To maintain consistent temperatures and minimize energy-loss from constant starts and stops, the fan keeps air flowing past the thermostat.
What temperature is displayed on the remote controller?
The remote always displays your desired indoor temperature. (You may view current indoor temperature, as well as desired temperature, on the indoor unit’s Front Panel Display.)
What happens if the remote is lost or damaged?
Use the Aux button to manually operate the unit. Lift up the front panel section on the indoor unit and locate the button on the right-hand side. Press the button to turn the unit ON or OFF. (Not all functions will be available.) Press again to cancel Aux Mode and transfer control back to the remote controller.
Not all features available on all models. Your actual system and related devices may differ from the images shown in this manual.
For complete instructions on these and other functions, as well as important safety information, see the Owner’s Manual.
For more information, visitGreeComfort.com.
Specifications are subject to change without notice. Manufacturer reserves the
right to discontinue, or change at any time, specifications or designs without
notice or without incurring obligations.
©2017. All rights reserved. Cat. No: GREE_SAPPHIRE_QUICK_01252023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>