XINDAO P329.471 RCS Recycled Plastic Lightboom 10W Speaker User Manual
- June 4, 2024
- XINDAO
Table of Contents
XINDAO P329.471 RCS Recycled Plastic Lightboom 10W Speaker
DEVICE LAYOUT
- Volume-/Previous song
- BT mode
- Volume+/Next song
- On/off button / Play/pause button
- LED control button
- Type-C charging port
- AUX port
- Charging indicator
- USB port
- TF card slot
- Mic
SPECIFICATIONS
- Speaker driver (mm) 57mm
- S/N Ratio (dB) 90dB
- Frequency range (Hz-KHz) 100Hz-20KHz
- Continuous playing time 4-6 hours
- Charging time 2,5 hours
- Battery capacity Speaker 1.800 mAh
- Mic function yes Pick up function yes
- BT version 5.0
- BT pairing name Lightboom 10W
- Output 10W
WARNING!
- Keep the product dry; do not place the product in damp places.
- Keep out of direct sunlight and high temperatures High temperatures may result in damage.
- Keep out of cold temperatures, this will help avoid internal damage.
- Do not disassemble the product.
- Avoid dropping the product.
- Do not continue to charge the product over 10 hours.
- When charging use the Micro USB charging cable that came with the product.
CHARGING THE SPEAKER
A full charge is approximately 2.5 hours and plays continuously 4-6 hours. Connect the speaker to the Micro USB charging cable to charge. When the LED indicator is RED, the speaker is charging. The LED indicator goes off when the device is fully charged
HOW TO USE
If you want to pair your mobile device with the speaker, please make sure the BT mode on your device is switched on. Switch the power on/off button on to pair the device. After doing so the speaker will be visible in the Bluetooth devices overview of your device. Please select “Lightboom 10W” to pair your mobile device with the speaker
References
Read User Manual Online (PDF format)
Loading......