PXN V10 Racing Wheel Controller User Manual

PXN V10 Racing Wheel Controller

Thank you for choosing PXN products and your support for our brand, please read this manual carefully before starting to enjoy your gaming experience.

APPEARANCE

PRODUCT CONTENT

• Fixed bracket *2
• Power adapter *1
• Power cable *1
• (Steering wheel)
• RJ cable *1
• USB cable *1
• (Foot pedal)
• RJ cable *1
• USB cable *1
• (Gear shift )
• Allen screw *4
• Allen key *1

SYSTEM REQUIREMENTS

• Supported platforms: PC / PS4 / X-ONE / X-Series X|S
• Compatible computer operating systems: Windows 7 / 8 / 10 / 11
• Note: Original controller should be used for guidance while playing on PS4 and X-ONE / X-Series X|S platforms.

BACK INTERFACE OF THE STEERING WHEEL

• Back Interface Connection Diagram

STEERING WHEEL INSTALLATION INSTRUCTION

• Assembling of Panel and Base

Align the panel with the panel mounting position of the base, hold the steering wheel dial, and tighten the locking ring.

• Steering Wheel Fixed Instruction

Step 1 Put the steering wheel base in a proper position and install the clamp.
Step 2 Use an Allen key to tighten the screws on the clamp to lock the clamp

• Steering Wheel Tilt Adjustment Instruction

When in use, you can set the inclination of the steering wheel base with 4 gears.
Step 1 Use an Allen key to remove the screws shown in the figure.
Step 2 Adjust the inclination of the base to the corresponding hole position and tighten the screws.

FOOT PEDALS INSTALLATION INSTRUCTION

• Panel Angle Adjustment of Foot Pedal

Step 1 Use an Allen key to loosen and remove the 2 Allen screws.
Step 2 Adjust the pedal to the desired angle, install and tighten the 2 Allen screws.

• Pedal Strength Adjustment Instruction

Rotate the parts shown in the figure to adjust the pedal strength.
Note: Please adjust the parts within the thread range.

• Foot Pedal Fixed Instruction

There are 4 screw holes reserved at the bottom of the foot pedal to fix the pedal to the bracket by combining the corresponding screws

INSTRUCTION FOR PLAYING ON PC

• Step 1 Connect the gear shift and foot pedals to the steering wheel.
• Step 2 Fix the steering wheel and connect it to the power adapter.
• Step 3 Plug the USB main cable of the steering wheel to the PC.
• Step 4 The steering wheel will be in D-input mode by default if successfully connected, and the red indicator on the steering wheel will be always on.

1. Mode Switch While Playing on PC

The steering wheel is in D-input mode by default. Press the “ ” button for 3 seconds to switch to X-input mode and a purple indicator will be always on if successfully switched.
Mode Switch by “ ” Button:

• D-input mode supports force feedback function (requires the game to support force feedback)
• Recommended games: Euro Truck Simulator 2, Forza Horizon 5, Assetto Corsa: Racing,
• Dirt Rally 2.0, F1 2020.
• No forceback feedback function in X-input mode
• Recommended games: Forza Horizon 4 (Steam version), Spintires: Snowrunner,
• Need for Speed: Heat Pursuit

INSTRUCTION FOR PLAYING ON PS4

• Step 1 Connect the gear shift and foot pedals to the steering wheel.
• Step 2 Securely install the steering wheel and connect to the power adapter.
• Step 3 Turn off the PS4 original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.
• Step 4 Plug the USB main cable of the steering wheel into the USB port of the PS4 host, and turn on the PS4 host.
• Step 5 Press the “ ” button of the steering wheel and the blue indicator of the steering wheel will be always on if connected successfully.

INSTRUCTION FOR PLAYING ON X-ONE/ X-SERIES X S

• Step 1 Connect the gear shift and foot pedal to the steering wheel.
• Step 2 Fix the steering wheel and connect it to the power adapter.
• Step 3 Turn off the X-ONE / X-Series X|S original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.
• Step 4 Plug the steering wheel USB main cable into the USB port of the X-ONE / X-Series X|S host and power on the X-ONE/ X-Series X|S host.
• Step 5 Press the “ ” button of the steering wheel and the green indicator will be always on.

STEERING WHEEL ADVANCED SETTINGS

Download for iOS: Search [ PXN Wheel ] in App Store.
Download for Android: Search [ PXN Wheel ] in Google Play.
Download the [ PXN Wheel ] APP on your mobile phone to get the advanced settings of the

• steering wheel. Main Functions of the APP:
• Steering effective rotation degree setting Force feedback setting
• Button mapping setting
• Game preset button configuration
• Steering wheel button test

PRECAUTIONS

• Please read the manual carefully before using.
• Avoid strong vibration and gravity drop.
• Do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from getting into the product to avoid damage.
• Avoid storing products in some places with humid, high temperatures,oily smoke, etc.
• Please use proper power while connecting and removing devices to avoid damage.
• Children can only use this product under the supervision of an adult.

PRODUCT SPECIFICATIONS

“ ” is a registered trademark of ShenZhen PXN Electronics Technology Co., Ltd PS4/PS3 is a registered trademark of Sony Computer Entertainment Inc. Xbox is a registered trademark of Microsoft Corporation. The switch is a registered trademark of Nintendo Co., Ltd.
All trademarks are the property of their respective owner. Technical specifications are subject to change. information contained herein is subject to change without prior notice.

SHENZHEN PXN ELECTRONICS TECHNOLOGY CO.,LTD. shall not be made liable for any errors that may appear. Please keep this information for later reference.

Please read the manual carefully before using the product, and keep this manual for future reference.

WARNING: Electrical Safety

• Please connect, install and remove this product with proper force, don’t twist or pull the connectors and
  cables.

• Avoid getting water or other liquids on product or its connectors.

• Please keep the product in dry place and keep away from fire, don’t expose the product in humid conditions,
  high temperature or a dusty environment.

• Please use the power cable that comes with racing wheel, do not use any other power cables.

• Please don’t use the power cable if the cable or its connector is damaged, cracked, or broken.

• Please make sure the power cable is plugged into power outlet correctly, and connected to the port on the
  back of racing wheel base properly.

• Please don’t disassemble, refit or repair on your own. Any repairs must be carried out by the manufacturer,
  the authorized representatives or qualified technicians.

• Please use the attached system/ accessories specified by manufacturer only.

• If any unusual sound, heat or odor occurs with this product, please stop using it and disconnect the power
  cable from the power outlet and cut off other cables.

• If the product is not used for a long time, please disconnect the power cable from the power outlet, which
  must be located near the product and must be easy to plug and unplug the power cable.

1. ALWAYS
2. NEVER
3. NEVER

• The product can only be operated by users aged 16 or above
• Heavy Product
• Be careful not to drop the product on yourself or on anyone else

WARNING: Possible injuries caused by force feedback and repetitive movements

To avoid possible injury caused by force feedback and repetitive movements, please take below advice for reference:

• Avoid lengthy gaming periods.
• Take a break of 10 to 15 minutes after each hour of using this product.
• If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, please stop playing and rest for a few hours before you start playing again.
• If the symptoms or pain indicated persist when you start playing again, please stop playing and consult your doctor.
• Please keep out of children’s reach.
• During gameplay, please always keep your hands in the steering wheel in the correct position, not placed at random.
• During gameplay, please never place your hands or your fingers under the pedals or anywhere near the pedal set.
• During calibration and gameplay, please never place your hand or your arm through the openings in the racing wheel.
• Ensure that the racing wheel base is secured according to the instructions in this manual.

Ventilation

Make sure not to block any of the air vents on the racing wheel base. For optimal ventilation, please make sure to do the following:

• Keep the racing wheel base at least 10cm away from any wall.
• Do not place the base in any confined space.
• Do not cover the base.
• Do not let any dust build up on the air vents.

For safety reasons, please never use the pedal set with bare feet or while wearing only socks on your feet. PXN is not responsible for injuries caused by using pedals without shoes on.

WARNING: Pedal set pinch hazard when playing

keep the pedal set out of children’s reach.

• During gameplay, please never place your fingers on or anywhere near the sides of the pedals
• During gameplay, please never place your fingers on or anywhere near the pedal’s rear base.
• During gameplay, please never place your fingers on or anywhere near the pedal’s front base.

• NEVER
• NEVER
• NEVER

Automatic calibration of racing wheel
The wheel will automatically calibrate when you plug the racing wheel into a power outlet. During calibration, the racing wheel will rotate 450 degree quickly towards the left and the right before stopping at the center

WARNING: To avoid improper calibration or personal injuries, please don’t touch the racing wheel during the autocalibration

Automatic calibration of the pedals
please always connect the pedal set before connecting the racing wheel to the device. Once the racing wheel’s calibration is completed and the game is started, the pedals will be automatically calibrated after a few presses.

WARNING: please never press the pedals during the racing wheel’s auto- calibration or while a game is loading

• If the product is not functioning properly or is not properly calibrated
• Power off your console or PC and completely disconnect the racing wheel. Then reconnect all cables (including the power supply cable, pedal set and shifter), and restart your console or PC and your game

References

• 莱仕达－专业游戏外设品牌|游戏方向盘|手柄|摇杆|安卓手柄|PS4|Xbox One|苹果手柄

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>