Renkforce RF-PCR-400 USB-C Card Reader and USB Hub User Manual
- June 9, 2024
- renkforce
Table of Contents
Operating Instructions
USB-C™ Card Reader and USB Hub
Item no: 2575509http://www.conrad.com/downloads
Intended use
The product is a USB-C™ card reader and USB hub. Use the product to:
- Read and write to various SD and CF card formats
- Connect 1x USB-C™ and 1x USB-A peripheral
The card reader can be used with mobile devices that support USB On-the-Go
(OTG).
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product
may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the
product.
Read the operating instructions carefully and store them in a safe place. Make
this product available to third parties only together with the operating
instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
Delivery contents
- Product
- USB-C™ male to USB-C™ male cable
- USB-C™ male to USB-A male cable
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:
**** The symbol warns of hazards that can lead to personal injury.
Safety instructions
**** Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling,
we assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
5.2 Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
5.4 Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Connection
Important:
- To prevent loss of data or damage, never disconnect the product from the computer, disconnect a USB peripheral, or remove a card when data is being transferred.
- Refer to your computer operating instructions for information about how to safely remove cards or disconnect from USB.
- Connect one end of the supplied cable to the USB Input port on the product. Connect the other end to an available USB port on your computer.
- The product will show up as a removeable device.
→ The product is now ready for use.
Tips:
- SD and CF cards can be used simultaneously.
- Data can be exchanged between SD and CF cards.
Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted
municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste.
Conrad provides the following return options free of charge (more details on
our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
Technical data
Input ………………………………………………. 5 V/DC, 3,0 A max.
Output…………………………………………….. 5 V/DC, 0.9 A max. (per slot)
Bootable …………………………………………. no
Plug and play…………………………………… yes
Supported card capacity……………………. max. 2 TB (per slot)
Supported SD cards …………………………. SD, SD3.0 UHS-I, SD4.0 UHS-II, SD High Capacity
(SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I, MMC-II, MMC 4.0, Mini SD, Mini
SDHC, MMCmobile, RS-MMC, RS-MMC 4.0
Supported CF cards …………………………. CFast Type I, CFast Type II
USB data transfer …………………………….. max. USB 3.1 Gen 1 5 Gbit/s
Supported OS (or above) ………………….. IpadOS 13.3, Mac OS 10.15.2, Windows® 8.1
(32/64 bit), Windows® 10 (32/64 bit)
Operating conditions…………………………. 0 to +45 °C, 20 – 90 % RH
Storage conditions……………………………. -20 to +60 °C, 5 – 95 % RH
Dimensions (W x H x D) ……………………. 105 x 14 x 44.7 mm
Weight ……………………………………………. 85 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2575509_V3_0922_dh_mh_en
18014399072882443-2 I3/O3 en