Panasonic NR-CW530X Refrigerator User Manual
- June 9, 2024
- Panasonic
Table of Contents
NR-CW530X Refrigerator
Operating Instructions Refrigerator
For Household Use
Model No.: NR-CW530X
Contents
Safety Precautions ……………………………. 2 Usage Precautions ……………………………. 4 Highlighted Features …………………………. 6 Installation ……………………………………….. 9 Parts Identification …………………………… 12 Operation Panel ………………………………. 14 Temperature Control ………………………… 15 ECONAVI Operation ………………………… 16 nanoeTM X ………………………………………. 16 Quick Freezing ……………………………….. 17 Prime Fresh+ ………………………………….. 17
Prime Freeze ………………………………….. 18 Quick Ice Making …………………………….. 20 Auto Ice Off and Auto Ice Clean ………… 21 Child Lock ………………………………………. 21 Fridge Room ………………………………….. 22 Prime Fresh Room ………………………….. 23 Freezer Room ………………………………… 24 How to Clean the Refrigerator …………… 27 Troubleshooting ………………………………. 32 Specifications …………………………………. 36
NON-CFC
This unit uses totally NON-CFC MATERIALS both for refrigerant (R600a) and for
insulation (Cyclo-Pentane). So, this refrigerator does not damage the Earth’s
ozone layer.
Thank you for purchasing the Panasonic product.
Please read these instructions carefully and follow safety precautions on page 2-5 before
using this product.
Please make sure the date and name of store of purchase are stamped in warranty card
and keep it with this operating instructions.
ARAH1E202340
DBD
P0322-0 Printed in Vietnam
Safety Precautions
Please be sure to follow these instructions.
WARNING
CAUTION
This sign means: It may lead to a serious injury or death.
These signs mean prohibited action.
This sign means: It may result in injury or property damage.
This sign means required action.
This sign means the appliance must
be earthed to prevent electric shock.
iso-butane
Otherwise, it may
Risk of fire / flammable materials.
cause a fire, injury, electrical shock.
WARNING
In case of emergency:
Maintenance work only be carried out at workshop by well-trained maintenance
worker.
iso-butane
Do not store explosive substances, such as aerosol cans with a flammable
propellant, etc. in the refrigerator.
Do not use electrical appliances such as a deodorizer in the refrigerator.
Leaked refrigerant may catch fire from a spark of the electrical contacts and
may cause an explosion.
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
Do not disassemble, repair or modify the refrigerator by yourself. If you want
to repair the refrigerator, please consult your dealer or authorized service
center.
Do not use mechanical device or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
When recycling the product:
Before taking the refrigerator to be recycled, please remove all the door
opening seal to prevent locking a child in it.
The warning labels mentioned above should be kept throughout the life of the
refrigerator.
The operating instructions should be handed over to any person who would use
or handle the refrigerator whenever the refrigerator would be transferred to
another location and delivered to a recycling plant.
Regarding to local laws, Cyclo-Pentane is used for insulation of this
refrigerator. When you throw away this unit, please discard it by proper
method and do not dispose it by burning.
2
Otherwise, it may
cause a fire, injury, electrical shock.
WARNING
For power plug and cord:
Do not plug or unplug with wet hands. Do not let the cord or plug be damaged.
Disconnect power plug when cleaning. Plug into a wall outlet of the rated
voltage on its own with the rated
current and insert plug fully. Reserve one socket for the refrigerator only.
Avoid connecting many
appliances to the same socket and unroll through the length of cord. Remove
dust periodically from the power plug. If the supply cord is damaged, it must
be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
If you detect burning smell, disconnect the power plug and ventilate the
kitchen. Stop using the refrigerator and unplug the unit immediately if there
is an
abnormality or failure. Abnormality and failure examples: – Power cord or plug
is abnormally hot. – Power cord is deeply cut or deformed. – There is burning
smell. – You can feel tingling electricity.
When using:
Do not damage the cooling circuit (piping on the back). Do not touch the
compressor and pipes, because of high temperature,
that there is a risk of burn injury. Do not let any children hang onto the
refrigerator’s door, it may
overturn to the kid. Do not place any water container on the top of the
refrigerator in case
the spilling water causes electrical shock or combustion. Do not locate
multiple portable socket-outlets or portable supplies at
the rear of the appliance. Keep ventilation openings, in the appliance
enclosure or in the built-in
structure, clear of obstruction.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
refrigerator.
When installing:
Fix the refrigerator to avoid danger due to unbalance.
When positioning the appliance, ensure the supply cord is not trapped or
damaged.
Ensure that the refrigerator is plugged into an earthed mains socket.
3
Otherwise it may cause injury, accidents.
CAUTION
When opening/closing the doors:
While opening the refrigerator, be careful not to pinch other one’s hand
holding the door.
Mind the gap between the doors. They may nip your hand while closing the door.
When storing food: Do not freeze glass bottles, that there is a risk of
injury. (If the liquid in a glass bottle is frozen, then the bottle may break
and you may be injured.) Do not add a high impact on glass trays. (Otherwise
those glass trays may break and you may be injured.)
When moving the refrigerator: Hold the refrigerator tightly when transporting.
Apply protective covering, etc. to floors with a fragile surface.
Usage Precautions
When opening/closing the doors: Do not refrigerate items which are bigger than
tray or shelf, as the door will
not close completely causing leakage of cool air. Do not open refrigerator
frequently or leave it open for long time in order to
prevent water dripping inside and waste energy. Frequently check the door
opening seal, it must be closed to the refrigerator’s
body completely.
When cleaning: Do not clean the refrigerator with chemical substance or
liquid. It will cause damage and have corrosion on the surface.
4
Usage Precautions
When using:
When the plug is disconnected, leave it for 7 minutes before plugging again. If not, the compressor may not work.
7 mins
Adjust the temperature according to the actual operating condition for energy saving.
The humidity inside the fresh case may condense so wipe it with a cloth periodically. Clean the fresh case once a month.
If you will not be at home for several days and there are nothing refrigerated in the refrigerator, the plug should be disconnected for energy saving. When
the refrigerator is not used for several days, it is necessary to take out all
remaining food inside the refrigerator, clean and open the doors for a few
hours to let the moisture inside the refrigerator dry out, avoiding mold and
oxidation of components.
The outside wall of refrigerator cabinet may sometimes get warm, especially just after installation. This is quite normal, and is due to the built-in Mullion
Dryer Pipe which prevents sweating and radiates heat.
When humidity is high, e.g. during rainy-season, condensation may appear on the surface of cabinet, especially around the door seal gasket. Wipe off the condensed water with a clean cloth.
Do not keep the door open any longer than necessary, particularly in hot, humid weather.
The top of the refrigerator is made of steel in order to prevent fire caused by external influences. Do not put things on top of the refrigerator to ensure this factor.
When storing food:
Do not overload the refrigerator. Gap must be provided between foodstuffs to
maintain the cooling effect.
Store fruits and vegetables in vegetable case, where trapped moisture helps
preserve food quality for longer time periods.
Drinking water, beverage bottles should be sealed to prevent odor
contamination.
Food stuff such as vegetables, fruits and fresh food should be wrapped or
packed in box before freezing and refrigerating.
Put the food such as meat or fish in the freezer if you want to store for an
extended period.
Cover juicy food with tight lids, plastic film or foil.
5
Highlighted Features
High-end design suitable for luxury kitchens Borderless glass surface with
modern handle design.
Energy saving Panasonic’s INVERTER technology increases energy saving and
reduces noise. Panasonic’s exclusive ECONAVI technology allows identification
of changes in
user’s lifestyle habits, helping the refrigerator to automatically adjust to
reduce energy consumption. Compressor located on top of the refrigerator (Top
Unit) Panasonic’s exclusive design moves the compressor from traditional
position at the bottom of the refrigerator to the top of the refrigerator,
optimizing the space inside the refrigerator. Auto Ice Making system
The refrigerator is equipped with an Auto Ice making system to meet the demand
for ice usage at all times.
The 5 L large-capacity water supply tank is made of BPA-free and antibacterial
material that is safe for health.
There is a Quick Ice Making mode. There is a Auto Ice Off mode to stop ice
making and
Auto Ice Clean mode to automatically clean the ice maker. nanoeTM X technology
and Ag Clean Panasonic’s exclusive nanoeTM X technology and Ag Clean help to
deodorize and neutralize bacteria, keeping food fresh for longer.
6
Prime Fresh room and Prime Fresh+
The temperature of Prime Fresh room can be changed from 4 °C ~ -5 °C**. –
Temperature -1 °C ~ -5 °C: Soft freeze temperature for food preservation,
which helps to save time and effort in defrosting food, while keeping their
flavor and freshness for longer. – Temperature 4 °C ~ 0 °C: Same as Fridge
room temperature when you want more space for food preservation in the Fridge
room.
Prime Fresh room makes it easier to remove and clean, helps avoid mixing
unpleasant odor or cross-infection.
- The default temperature setting of Prime Fresh room is -3 °C.
** Depending on the type of food, such as a large block of meat or a large fish, the storage
conditions and the ambient temperature, the cooling performance may be affected. In this
case, the temperature of Prime Fresh room should be set to the lowest temperature -5 °C.
Prime Freeze
Freeze fresh or prepared food quickly according to each mode, while keeping
their fresh taste.
Prime Freeze case includes the following modes: · Cool Down in 3 minutes and 5
minutes · Quick Cooling in 10 minutes and 15 minutes · Rapid Freezing in 45
minutes and 60 minutes.
Depending on the purpose of food processing and the type of food, it is
possible to choose from and apply different modes.
7
External water dispenser
Allows users to get cold water without opening the refrigerator door.
The 3 L large-capacity Water tank is made of BPA-free, antibacterial material
that is safe for health
Fresh Safe vegetable case
The large-capacity Fresh Safe vegetable case is equipped with a Moisture control filter, which keeps vegetables fresh and prolongs their shelf life.
Quick Freezing
Quick Freezing makes the temperature in the refrigerator cool down quickly, so
as to retain the foodstuffs original flavor.
Convenient Operation Panel
It is possible to adjust the temperature and modes of the Fridge room, the
Prime Fresh room, the Freezer room and the Prime Freeze according to the
user’s intended purpose.
The Fridge room and Freeze room have doors alarm to remind closing the
refrigerator doors.
The LED display and Operation Panel appear clearly and easy to use.
There is a Child Lock mode.
8
Installation
The distance requested for installation
5 cm
The top of the refrigerator is at least 5 cm from the ceiling.
5 cm The left and right sides of the refrigerator are at least 5 cm from the
walls.
Caution
In case the refrigerator is placed next to walls, it is necessary to ensure
that the space between the left or right side of the refrigerator and the wall
is at least 25 cm. If this space is less than 25 cm, the doors may not be
fully opened and the glass trays, vegetable case, etc. could not be taken out.
25 cm
The back of the refrigerator is at least 5 cm from the wall.
129
Do not place any objects on top of the refrigerator. It may become hot due to
heat generated by the compressor at the top of the refrigerator. If it is
difficult to release heat, the cooling capacity may be lowered.
Compressor
When using for the first time: clean the inside of the refrigerator. · Use a
soft damp cloth to clean the refrigerator. · Rinse the Water tanks, Water
filters and Ice trays. · The smell of plastic could be smelled in the first
time using the refrigerator. If you are worry about it, please ventilate the
room.
Do not locate the refrigerator in a humid place as rust may form and may cause
electric leakage.
Do not locate the refrigerator exposing to direct sunlight as the heat and
sunlight will increase the temperature affecting to the cooling capacity.
Do not locate the refrigerator near heat source such as cooking stove or oven.
Do not block the openings around the refrigerator. The refrigerator must be
located in the place where there is good air circulation. In case of placing
the refrigerator on an uneven surface, adjust the adjustable leg to
make the refrigerator stands stably.
9
LED lamp and grounding
The refrigerator LED lamp, specially designed for this refrigerator, do not
replace it by yourself. If you need replacement, please contact Panasonic
Service Center.
If there is no grounding wiring plug in refrigerator, it should be connected
with grounding connection to prevent electrical hazard from electric leakage.
Moving or shifting
1 Remove ice in the Ice Trays and Ice Box, water in the Water Tanks.
2 Unplug the refrigerator. 3 Adjust the adjuster bolts (left and right) so
that they do not
touch the floor. 4 Place a container underneath the drainage hole, then slowly
tilt the refrigerator backward to drain water from the drainage hole. This
action requires 4 or more people, of which 2 people lift the front of the
refrigerator to prevent the refrigerator from sliding and avoid the risk of
accidents.
Drainage hole
How to move and transport
At least 4 people are required to transport the refrigerator. Each person
lifts a corner of the refrigerator. Do not transport by holding the
refrigerator doors.
Caution
When transporting, use straps to secure the refrigerator doors and avoid letting the doors open by itself.
Use straps to secure
Do not place the refrigerator on its side when transporting, as this may cause damage
to the refrigerator.
After installation, wait at least 4 hours before plugging in the power to ensure that the
gas and oil in the compressor are in a stable state.
10
If the door is slanted downwards.
Turn the adjuster bolt on the lower side, as shown in the diagram, in order to
adjust the level.
The freezer/refrigerator doors may tilt within four to five days after
installation due to the load of the food or adaptation to the floor surface,
turn the corresponding adjuster bolt with the dedicated tool to adjust and
level the door again to restore.
When the door is lowered.
Lower the right adjuster bolt for the right door.
Lower the left adjuster bolt for the left door.
Dedicated tool (Accessories)
Have any measures taken against tipping due to earthquakes?
In order to prevent the refrigerator from tipping due to earthquakes,
permanently fix it by using belts, etc.
Fix the refrigerator.
Turn the adjuster bolts (right and left) until they reach the floor to
stabilize the refrigerator.
Refrigerator doors should not be opened during the interior cooling process.
The doors should not be opened until the interior has been cooled down
sufficiently. (Warm air flowing into the interior will block the cooling
function.)
Please wait until the interior has cooled down.
The refrigerator may take at least 4 hours in continuous running to cool down
the interior, in the condition of no loads inside and the doors are not
opened.
Depending on ambient temperature and usage condition, it may take 24 hours to
cool down the interior and achieve equilibrium.
11
Parts Identification
Left door
Right door
18 19 17
23 24
12
Parts Identification
A-Fridge room 1 French Crossrail The French Crossrail minimizes the gap
between the left door and the right door of the refrigerator. If this French
Crossrail is opened forward, put it back into place. (Otherwise, the
refrigerator doors cannot be closed fully, causing the refrigerator to lose
cool air.)
Water Dispenser Lock
Press the faucet lever to get water Rear case cover
Refrigerator Left door French Crossrail
2 Door shelves (Quantity: 3 pcs) 3 Egg tray 4 Large door shelf (Quantity: 2
pcs) 5 Bottle shelf (Quantity: 2 pcs) 6 Water tank of Water Dispenser 7 LED of
Fridge room (Quantity: 3 pcs) 8 Door gasket of Fridge room 9 Glass trays
(Quantity: 2 pcs) 0 Slide glass tray a Glass tray vegetable case b Water tank
of Auto Ice maker c Vegetable case d Moisture control filter for vegetable
case e nanoeTM X icon
B-Prime Fresh room
f Prime Fresh case
Drainage system [Inside the drain tray] Product view from behind
C-Freezer room g Prime Freeze case h Auto Ice maker i Ice box j Upper freezer
case k Lower freezer case l LED of Freezer room m Door gasket of Freezer room
n Adjuster bolts
13
Operation Panel
1
2
a
3
c
b
4 d
5
6 79 8
0
1 Icon and LED of nanoeTM X: display the current status of nanoeTM X mode. 2 Icon and LED of ECONAVI: display the current status of ECONAVI operation. 3 LED of compartments: the icon of the respective compartment will light up when the
compartment is selected. 4 Temperature and time display area: display the temperature of Fridge room, Freezer room,
Prime Fresh room and the time for modes of the Prime Freeze. 5 Temperature control button of Fridge room. 6 Temperature control button of Prime Fresh room. 7 Control button and LED of Prime Fresh+. 8 Temperature control button of Freezer room. 9 LED of Quick Freezing. 0 Control button and LED for modes of Prime Freeze. a Control button and LED of Quick Ice Making. b Control button and LED of Auto Ice Off. c LED of Auto Ice Clean. d Control button and LED of Child Lock.
Remark
On the Operation Panel: “Extra function: Press 3 sec”, means that you need to
press and hold the button beginning with “” mark for 3 seconds when you want
to start the extra
functions. Under normal conditions, the Operation Panel light will turn off.
When you press the
buttons, the Operation Panel light will turn on. The Operation Panel light
will turn off and all the buttons will not be operated when the refrigerator
door is opened. In summer, when the temperature is high, if you put uncooled
food in the refrigerator or open/ close the refrigerator doors repeatedly, the
temperature inside will increase and the displayed
value will be higher than the setting temperature. Therefore, it is necessary
to reduce doors
opening times. When first plugged in, the Operation Panel will display the
introduction of modes and the
temperature of compartments for about 10 seconds. Buttons will not be active
during this
period of time. After 10 seconds, the Operation Panel can be adjusted
normally.
14
Temperature Control
The first temperature setting for Fridge room is 4 °C, Prime Fresh room is -3
°C and Freezer room is -20 °C. The temperature setting for each compartment
can be adjusted.
The temperature setting range of the Fridge room is 7 °C ~ 1 °C, of the Prime
Fresh room is 4 °C ~ -5 °C (the temperature for soft freezing is -1 °C ~ -5
°C, and the temperature to use the Prime Fresh room as the Fridge room is 4 °C
~ 0 °C), of the Freezer room is -15 °C ~ -23 °C.
The temperature inside the refrigerator will vary depending on the ambient
temperature, installation status, usage conditions and amount of food.
Due to different testing methods and tools, the actual temperature may differ
from the displayed temperature.
This refrigerator is equipped with a processor to control the temperature
inside the refrigerator. When the ambient temperature changes, the compressor
runs or stops, the doors are opened or closed, the temperature inside the
refrigerator and the temperature setting will have a slight difference.
Temperature setting instructions
1. Display the current temperature
Press the following icons to display the current temperature of these
compartments: Fridge room, Prime Fresh room, and Freezer room. The LED
indicates position and the LED indicates temperature of the compartment will
light on when selected.
Icon
Compartment
LED indicates position of the compartment
LED indicates temperature of the
compartment
Fridge room
Prime Fresh room
Freezer room
2. Temperature setting After pressing the icon of compartment (Fridge, Prime
Fresh, Freezer) to display the current temperature, press again to start the
temperature setting process. Then, LED indicates position of the compartment
and LED indicates temperature of the compartment will flash. Continue to press
the icon of that compartment to select the desired temperature level. Each
time the button is pressed, the temperature will increase by 1 °C. 3. Complete
temperature setting After completing the temperature setting, press another
button to finish and save the setting that you have just made. Or if no other
button is pressed within 10 seconds, the Operation Panel will save the setting
and return to stand by mode.
15
ECONAVI Operation
The refrigerator detects the opening and closing of the refrigerator door and the brightness around the refrigerator to control operations automatically to ensure maximum energy saving.*1
ECONAVI light
Light intensity
sensor
ECONAVI operation The refrigerator learns the lifestyle patterns of your
family from door opening and time periods of infrequent use to maximize energy
efficiency. The refrigerator learns your lifestyle patterns from the previous
3 weeks of use and uses that data
from the 4th week onwards. The refrigerator performs the ECONAVI energy
saving operation when it becomes dark around the refrigerator such as in the
night.
Settings for enabling ECONAVI operation ECONAVI operation is enabled automatically when the temperature control for both the Fridge room and the Freezer room is set to 4 °C and -20 °C, respectively. ECONAVI operation does not operate if the “Quick Freezing”, “Prime Fresh+”, “Prime Freeze” or “Quick Ice Making” mode is in operation. It is not possible to force to start of the ECONAVI mode.
Remark
*1 The effectiveness of the ECONAVI mode is dependant on the ambient temperature, ambient brightness and the number of times the refrigerator door is opened and closed and the state
in which food is stored.
nanoeTM X
A nanoeTM is a nano-sized ion particle coated with water particles. nanoeTM X
are nano-sized electrostatic atomized water particles with 10 times the OH
radicals of nanoeTM.
nanoeTM X will start when the refrigerator is plugged in and always run when
the refrigerator is in use. However, nanoeTM X requires moisture when
operating, the effectiveness of this mode will be reduced if the humidity
inside the Fridge room is reduced (such as when storing a few of vegetables,
tubers).
The nanoeTM X device device may cause a small sound during operation. After a
long time closing, when open the doors of the refrigerator, it is possible to
sense the
typical odor of ozone generated during operation, this is a normal phenomenon.
16
Quick Freezing
When “Quick Freezing” is set, the refrigerator will reduce the temperature
quickly for better
performance of preserving food. How to operate the “Quick Freezing” mode
Remark
Light is on: Quick Freezing is operated.
Light is off: Quick Freezing is not operated.
Press and hold the “Freezer” icon for 3 seconds to start the Quick Freezing.
Then, the light below the
“Quick Freezing” icon will turn on. If you want to stop the Quick Freezing
operation
immediately, press and hold the “Freezer” icon for 3 seconds until the light
turns off.
The “Quick Freezing” operation will stop automatically after running for 150
minutes and return to normal mode. (The light LED [Quick Freezing] turns off.)
The flashing of light LED [Quick Freezing] means that the defrosting system is
currently working. The “Quick Freezing” mode will start right after the
defrosting operation is finished.
The temperature of the Freezer room will return to its previous setting when
the Quick Freezing mode ends.
The following modes will be stopped when Quick Freezing is turned on: Prime
Fresh+ ; Quick Ice Making; Prime Freeze.
Prime Fresh+
When “Prime Fresh+” is set, the Prime Fresh room will reduce the temperature
quickly for
better performance of preserving food. How to operate the “Prime Fresh+” mode
Light is on: Prime Fresh+ is Press the “Prime Fresh+” icon twice in a row to start
operated .
Prime Fresh+. Then, the light above the “Prime Fresh+”
Light is off: Prime Fresh+ is icon will turn on. not operated. If you want to stop the Prime Fresh+ operation
immediately, press the “Prime Fresh+” icon once until the
light turns off.
Remark
“Prime Fresh+” will stop automatically after running for 105 minutes (when the ambient temperature is 18 °C or less) or between 145 ~ 150 minutes (when the ambient temperature is higher than 18 °C) and return to normal mode. (The light LED [Prime Fresh+] turns off.)
The flashing of light LED [Prime Fresh+] means that the defrosting system is currently working. “Prime Fresh+” will start right after the defrosting operation is finished.
The temperature of the Prime Fresh room will return to its previous setting when “Prime Fresh+” ends.
The following modes will be stopped when Prime Fresh+ is turned on: Quick Freezing; Quick Ice Making; Prime Freeze.
“Prime Fresh+” will not start when the temperature of the Prime Fresh room is being set at 4 °C ~ 0 °C.
17
Prime Freeze
Prime Freeze is a separate room located inside the Freezer room. This
compartment is equipped with an individual fan system and high-class aluminum
heat transfer plate, and modes to adjust the cooling time according to each
food processing purpose in order to support the user in preparing dishes in a
variety of way and save time.
How to operate Prime Freeze 1 Press the icon of the Prime Freeze compartment
on the Operation Panel. Then, the LED
indicates position of the compartment, the LED indicates mode 1-2-3(*) and the
LED indicates operating time(**) of the Prime Freeze will turn on when
selected.
Icon
Compartment
LED indicates position of the compartment
LED indicates LED indicates mode 1-2-3 operating time
Prime Freeze
(*) For LED indicates mode 1-2-3: · If the previous setting has not run out of
time, the light will display the previous setting mode. · If there is no time
left from the previous setting, all LED indicates mode 1-2-3 will turn off.
(**) For LED indicates operating time: · If the previous setting has not run
out of time, the remaining minute value will be displayed. · If there is no
time left from the previous setting, the minute value will be displayed as
“–“.
2 Continue to press the icon of the Prime Freeze compartment, then the LED
indicates position will flash. After this step, if the previous setting have
not run out of time, the minute value will be cleared and displayed back to
“–“. Press the icon of the Prime Freeze until the desired mode is selected.
Each time the button is press, the LED indicates operating time will show the
time in each respective mode.
3 Complete the setting After completing the setting of Prime Freeze, press
another button to finish and save the settings that you have just made. Or if
no other button is pressed within 10 seconds, the Operation Panel will save
the setting and return to stand by mode.
4 End mode After the setting time of a mode running out, the Operation Panel
will display the time back to “0” and there will be a notification sound. The
notification sound will repeat every 2 minutes for 6 minutes, until you press
the “Prime Freeze” icon on the Operation Panel or when the Freezer room door
is opened. If you do not take food out immediately after the end of the mode,
your food may be frozen more than desired.
18
Modes of Prime Freeze
Mode name
Display
Purpose of food processing
Mode (Unit: Minute)
Recommended type of food
Remark
Cool Down
Cooling down quickly the warm/hot food
– Do not cover the box with lid or food
wrapper to ensure the effectiveness
3
· Rice (150 g)
of Cool Down. If you are concerned
· Potato salad (150 g) about the smell of your food, you can
use a lid or food wrapper to cover it,
but the food may not be cold enough.
– 5 minutes is the estimated time for
1 lunch box (about 150 g of rice) or
200 g of prepared food. If the amount
of food is larger, it may take longer to
· Rice (300 g)
cool down.
5
· Potato salad (300 g) – Quick Cooling can be used to · Formula milk (100 ml) cooling down over 200 ml of formula
· Soup (150 ml)
milk within 10 minutes.
– After cooling down the formula milk
with Cool Down, it is necessary to
check the temperature of the formula
milk before giving it to the baby.
Quick Cooling
Cooling food quickly to save time for preparing food and desserts.
· Curry (200 g)
10
· Fish (100 g) · Pudding (2 pieces)
· Jelly (2 pieces)
– For ingredients that need to be marinated or seasoned such as meat, fried/grilled fish, soy-marinated eggs, etc., put the ingredients and spices into sealed containers/bags.
The ingredients will burst with flavor
· Curry (400 g) · Chicken drumstick (250 g)
during the cooling process.
– For fresh meat, fish, and shrimp that may be difficult to slice/cut, the
slicing/cutting will be easier after
15
· Pudding or Flan (4 pieces)
placing them in Quick Cooling mode. – Use aluminum or metal cups for jelly
· Jelly or cakes made or desserts. With ceramic or porcelain
from gelatine
containers, food may not be cold enough.
(4 pieces)
– This mode can be used to cool
beverages quickly.
Rapid Freezing
Freezing rapidly prepared dishes to ensure the
· Beef (150 g) · Steamed vegetables
– Cover fresh food and steamed vegetables with food wrapper,
(1 bunch of broccoli) freezer bags or cover with tight lids.
· Vegetables (250 g of – Fried foods (e.g. fried chicken,
45 sliced cabbage)
fried shrimp/squid, spring rolls,…)
· Fried chicken (250 g should be placed onto an aluminum
for 2 people)
tray and use “Rapid Freezing”.
preservation
· Sherbet (300 ml)
After freezing the food, put them
of prepared
· Bread (2 pieces)
into freezer bags or containers for
foods and
storage.
save time
· Jellied meat (350 g) – This mode can be used to freeze
for every
· Half of a chicken
some fruits such as strawberries,
day cooking. 60 (500 g)
lychees, berries,… for long-term
· Beef (250 g)
preservation.
· Cubed ice (1 tray)
19
Prime Freeze
Remark
Always place food on the aluminum heat transfer plate for the best
effectiveness of cooling. When hot or wet food is placed on the aluminum heat
transfer plate without a lid or food
wrapper, the surface of the food may be frozen and the inside of Freezer room
may be frosted. If you are worry, please use lids or food wrapper.
If cooked food is still at a high temperature, it should be cooled down to
about 70 °C before putting in the Prime Freeze case.
Leaving a glass bottle or can inside the compartment may pose a risk of
broken, cracking, or damage.
Do not place the food which is higher than the height of the Prime Freeze case
to avoid the risk that the Prime Fresh case does not close completely, causing
frost and damaging food or food containers in the room.
Do not touch the metal food container directly with wet hands, as there is a
risk of frostbite. During the operation of Prime Freeze:
· ECONAVI operation will be stopped. · The noise from the fan will be louder.
· The power consumption will be higher than normal. · If Quick Ice Making are
set, Prime Freeze will be stopped. · The flashing of [Prime Freeze] LED means
that the defrosting system is currently
working. “Prime Freeze” will start right after the defrosting operation is
finished. This is a normal phenomenon.
When Prime Freeze is not in use, this case can also be used as any other
position in the Freezer room. · Small foods can be stored for easier finding.
· The temperature in this room may be higher than the temperature in the
entire Freezer room. For long-term preservation, please transfer food to the
Freezer room.ngn ông lnh, bo qun lâu dài, hãy chuyn thc phm sang ngn ông lnh.
Quick Ice Making
When setting Quick Ice Making, the refrigerator will increase its capacity to reduce ice making time.
How to operate Quick Ice Making
Light is on: Quick Ice Making is operated. Light is off: Quick Ice Making is not operated.
Press the “Quick Ice Making” icon twice in a row to start Quick Ice Making.
Then, the icon of Quick Ice Making will
turn on.
When you want to stop quick ice making, press the “Quick Ice Making” icon once
until the light turns off.
Remark
The following modes will be stopped when Quick Ice Making is turned on: ·
Quick Freezing · Prime Fresh+ · Prime Freeze · Auto Ice Off
20
Auto Ice Off and Auto Ice Clean
When the refrigerator is in operation, the Auto Ice making mode will automatically operate
without any setting. When setting the Auto Ice Off and Auto Ice Clean mode, the refrigerator will stop the Auto Ice making and clean the ice maker automatically.
How to operate the Auto Ice Off mode
Light is on: Auto Ice Off is operated. Light is off: Auto Ice Off is not operated.
Press the “Auto Ice Off” icon twice in a row to stop Auto Ice making. Then,
the LED icon of Auto Ice Off mode will turn on.
When you want to restart the Auto Ice making mode, press the “Auto Ice Off”
once. Then, the LED icon of the Auto Ice Off mode will turn off.
Remark
When the Auto Ice Off mode is on, Quick Ice Making, if active, will be stopped. How to operate the Auto Ice Clean mode
Light is on: Auto Ice Clean is
operated. Light is off: Auto Ice Clean is not
operated.
Press and hold the “Auto Ice Off” icon for 3 seconds to enable/disable the
Auto Ice Clean mode. At the end of the automatically
cleaning process, the refrigerator will have a notification sound.
Remark Cannot stop/disable the operation of Auto Ice Clean mode when it is in processing.
For details on the cleaning operation of Auto Ice maker, please refer to Page 26.
Child Lock
When setting the Child Lock mode, the Operation Panel will disable the interaction to adjust temperature and modes in order to prevent unintended adjustment by children.
How to operate Child Lock
Light is on: Child lock is operated.
Light is off: Child lock is not operated.
Press the “Child Lock” icon and hold for 3 seconds to enable the Child Lock
mode. Then, the light of “Child Lock” will turn on.
When you want to stop the Child Lock mode, press and hold the “Child Lock”
icon again for 3 seconds until the light turns off.
21
Fridge Room
The temperature range of the Fridge room is 7 °C ~ 1 °C If the temperature of
the Freezer room is set to 1 °C during a long period of time, your food may be
frozen.
How to use slide glass tray
Slide the front-half glass tray to the back, then you can put higher things
depending on your purpose of use.
Vegetable case
Vegetable case is equipped with large-capacitor and the guide rail with
maximum opening angle, making it easier to take out food and increasing its
load-bearing capacity, allowing the user to gently pull the case out with just
one hand. The Moisture control filter will control the humidity inside the
vegetable case, helping the vegetables retain moisture and stay fresh.
Remark
Due to high humidity, water drops may appear on the vegetable case. Wipe it
off with a soft cloth. Do not place food higher than the height of the
vegetable case to avoid the risk that the
vegetable case does not close completely, causing frost and damaging
vegetables and fruits.
How to use the Water dispenser
With the Water dispenser, you can get cold water without opening the refrigerator door.
Method of getting water
Lock
1 Push the lock upward until it touches the top edge.
2 Keep the cup straight and gently push the lever to get water.
Attention
Open
After taking enough water, slowly take the cup out
Close
to avoid the water leaking.
Use a clean cloth to dry if any water spills out.
When you need to lock the Water dispenser, pull the lock
downward until it touches the bottom edge and the red line can be seen. If it is not necessary to lock the Water dispenser, skip this step.
Push the level to get water
How to use Water tank
1 Open the cap and pour water into the tank.
Cap
2 Close the cap tightly and close the refrigerator door.
Attention
When using for the first time, it is necessary to clean the Water tank first.
Do not pour hot water above 50 °C into the Water tank. The tank can contain up
to 3 liters of water. Do not pour water
above the 3 L line on the tank.
Only pour drinking water into the Water tank; do not use beer, soft drinks,
carbonated beverages, etc. Ensure that the Water tank is always installed in
the right position when the refrigerator is in
use. Otherwise it will affect the cooling efficiency and cause sweating in the
Fridge room door. Check the Water tank before use. Hardness of water must be
100 mg/L or less. The minerals may appear as white floating
particles. They are not harmful.
Water container should be filled from drinkable tap water. This product is not
designed to
22 replace a water treatment system. Not suitable for untreated rain Water
tanks.
Tips for food preservation
Do not stuff too many food items When there are too many food items and there is no space for cool air circulation inside the refrigerator, the cooling capacity will be affected. Provide sufficient space between foods.
No wasting cool air inside the refrigerator is the key to keeping food
fresher for longer!
Do not block the cool air outlet with food items If the cool air does not
spread into every corner of compartments, then the interior will not be
sufficiently cooled and more electricity will be consumed.
*The cooling air vents are located on the duct inside the Fridge room.
Prime Fresh Room
The temperature in the Prime Fresh room can be selected as below: · The
temperature for soft freeze is -1 °C ~ -5 °C. · The temperature to use the
Prime Fresh room as the Fridge room is 4 °C ~ 0 °C.
When using the refrigerator, the temperature can be adjusted according to your
usage. *The default temperature setting of Prime Fresh room is -3 °C.
Using Prime Fresh room
Approx. -1 °C ~ -5 °C
This room is suitable for storing fresh food, such as meat or fish. Compared to storing in
the Fridge room, the storage life of meat or fish becomes longer.
When food is frozen too much. Sliced raw fish or meat may be frozen too much.
Set the temperature to higher than
-3 °C to prevent food from over frozen. When food is not partially-frozen.
Depending on the type of food,
such as a large block of meat or a
Easy to cut.
The partiallyfrozen foods is easy to cut! It comes in handy.
large fish, the storage conditions and the ambient temperature, food may not be partially-
frozen as it intended. Then, set to the lowest temperature -5 °C.
Do not stuff too many food items. When there are too many food items and there is no
space for cool air circulation inside the refrigerator, the cooling capacity will be affected.
Provide sufficient space between foods inside Prime Fresh room.
When storing food in large amount, e.g. a large block of meat, a large fish or a chicken, it is advisable
to place the food at the center of the Prime Fresh room to optimize the cooling performance.
When the temperature of the Prime Fresh room is set at 4 °C ~ 0 °C, the Prime Fresh+
mode will not operate in order to prevent food spoilage.
Do not block the cool air outlet with food items inside
the Prime Fresh room.
If the cool air does not spread into every corner of
Cooling air
Prime Fresh room, then the interior will not be
guide
sufficiently cooled and the food may be affected.
Prime
Therefore, food should not be placed in front of the
Fresh case
Cooling air guide (on the Prime Fresh case)
to prevent blocking the air circulation inside the room.
23
Freezer room
Frozen or refrigerated foods are stored for a long time by using the Prime Freeze case. The temperature range of the freezer room is -23 °C to -15 °C.
Three tips for freezing food and locking in the flavour
Frozen food
1. Freeze thin and small items of food quickly!
Frozen food
Frozen food
2. Fully sealed
3. Do not refreeze
Auto Ice making
Water tank of Auto Ice maker
WBatlerc fniltecr
FTronct
BSauck
Ice tray of Auto Ice maker Ice box
To use the Auto Ice maker in comfort
Please use only drinking water for Auto Ice making.
The hardness of water must be 100
mg/L or less.
Do not put liquids such as the following into the Water tank. (These liquids may damage the Auto Ice maker).
Drinking water
Juice, etc.
Sports drinks Carbonated beverages
Hot water
Tips
Attention
The hardness of water must be 100 mg/L or less. When the Ice box is full and the ice cubes
The minerals may appear as white floating particles. touch the ice detection lever, the ice
They are not harmful.
making will stop automatically.
When using the Auto Ice maker for the first time,
The pile of ice cubes will
odor or dust may be on the Ice tray, etc.
Please throw away the first lot of ice. Remember to regularly use the Auto
Clean function
of the Auto Ice maker. (Page 21)
touch the ice detection lever. (Then, the Auto Ice making will stop).
Ice detection lever
Distribute the ice cubes evenly inside the Ice box for making more ice.
24
Request
Do not pour water directly into the Ice box to make ice. (Otherwise, the Ice
box may be broken).
Do not put food or other things into the Ice box. (Otherwise, the amount of
ice cannot be correctly detected and Auto Ice making may be stopped or the Ice
box cannot be pulled out.)
Ice maker cycle time will be longer in the following cases.
The first time using the refrigerator. (It will take at least 24 hours since
the Auto Ice making function only starts after the inside of the refrigerator
is cool enough).
When the refrigerator doors is frequently opened.
When the refrigerator doors is ajar.
When a large amount of food is stored at once.
When the ambient temperature is low during winter or high during summer.
When a power failure occurs.
How to use Water tank of Auto Ice maker*
1 Take the Water tank out.
2 Fill with water.
3 Install the Water tank.
Lid
Do not fill more water than the “Max”
(Maximum) line.
Push the Water tank in completely.
Pull out the Water tank until Open the lid and fill the
Confirm the direction of the
it is blocked.
Water tank with water, then tank and install until the tank
Fill water up to the “Min”
put the lid back in place.
reached the end lock.
(Minimum) line.
(If the Water tank does not
reach the end lock, the Auto
Ice maker could not operate)
*Ice could be made in approx. 2 hours, with the temperature in the Fridge room is 4 °C, Prime
Fresh room is -3 °C, and Freezer room is -20 °C.
How to make ice quickly
In the “Quick Ice Making” mode, the ice making speed will be increased. Ice
can be made within 90 minutes* at the quickest.
Remark
After about 6 hours, the refrigerator will automatically return to normal Auto
Ice making mode.
The flashing of [Quick Ice Making] LED means that the defrosting system is
currently working. “Quick Ice Making” will start right after the defrosting
operation is finished.
In Quick Ice Making, energy consumption increases more than usual. ECONAVI
operation does not work during the setting of “Quick Ice Making”.
- Ambient temperature of 20 °C, the temperature of the Fridge room, the Prime Fresh room, and the Freezer room are 4 °C, -3 °C, and -20 °C, respectively.
25
How to clean the Auto Ice Maker
When using for the first time or when not being used after a long time, the
Water tank may smell unpleasantly or collect dust. Remember to clean the Water
tank before proceeding to clean the ice maker. After selecting the Auto Ice
Clean mode, water will be automatically poured into the Ice tray and water
supply pipe 3 times (for about 2 minutes) to drain the water. When selecting
the ice maker cleaning mode, make sure there is enough water in the Water
tank. 1 Pull out the Ice box, remove all ice cubes from the Ice box (after the
ice cubes are fully
formed), and then install the Ice box back. 2 Fill the Water tank with water.
3 Select the Auto Ice Clean mode (Page 21).
· At the same time, the refrigerator will sound a notification and begin to
clean the ice maker.
· During the cleaning process, the sound cannot be turned off. · After the
beeping sound to inform the completion of the cleaning process, the icon of
the
Auto Ice Clean mode on the Operation Panel will turn off, the ice maker
cleaning process will end and the Auto Ice making will be started. 4 Pull out
the Ice box from the Freezer room, throw away the water in the Ice box and
wipe the water off. If you do not clean all water on the Ice box, the Ice box
may be broken.
How to turn off Auto Ice maker
You can enable/disable the Auto Ice making mode according to your needs. Turn
off Auto Ice making 1 Choose the Auto Ice Off mode, the icon of the Auto Ice
Off mode on the Operation Panel
will turn on and the refrigerator will stop making ice (Page 21). 2 No need to
pour water in the Water tank. The remaining water inside the Water tank will
keep making ice, and ice cubes will be available after 2 hours. Or when the
Ice box is full, the Auto Ice making will be stopped. 3 When you want to
continue making ice automatically, please choose the Auto Ice Off mode, and
the icon of the Auto Ice Off mode on the Operation Panel will turn off (Page
21). Turn off Auto Ice making for a long period of time 1 Empty the Water tank
and remove all ice cubes from the Ice box. 2 Clean the Water tank, Water
filter, Water tank seal rubber and Ice box; dry and put them back to their
place. 3 When using again, please refill the Water tank and put it back. When
transporting the refrigerator 1 Empty the Water tank and remove all ice cubes
from the Ice box. 2 Choose the Auto Ice Clean mode, the icon of Auto Ice Clean
mode on the Operation Panel will turn on and the refrigerator will start
cleaning the ice maker. (At this time the ice cubes and water in the process
of making ice will fall into the Ice box) 3 The cleaning process will stop
after 2 minutes. Take out the Ice box and empty the ice cubes and water in the
Ice box. 4 Clean the Water tank, Water filter and Ice box; dry and put them
back to their place.
26
How to Clean the Refrigerator
Before cleaning or conducting maintenance, be absolutely sure to disconnect the power plug
from the power outlet. Do not connect or disconnect the power plug with wet hands.
When the plug is disconnected, leave it for 7 minutes before plugging again. If not, the
compressor may not work.
Clean the refrigerator immediately after it is stained! Wipe off stains on the
interior surfaces quickly before they harden. In particular,
Use lukewarm water!
Rub the door surface with a soft damp cloth.
cooking oil or lard may cause plastic to
crack and citrus juice may cause the
refrigerator to become discolored. When
stains cannot be removed easily, wipe
them with a cloth lightly soaked in neutral
kitchen detergent. Then, wipe with a cloth
lightly dipped in water. Clean the detachable items occasionally.
Remove and rinse!
Clean the ice tray once a week. As a guide,
remove the trays, door shelves, etc. and
wash them by immersing them in lukewarm
water every three months.
Clean the door gasket at least once a month. Clean by wiping with a soft damp
cloth. Lubricated gel has been applied to the door gasket on the hinge side of
the refrigerator, be careful not to wipe it off.
Notices
Point where lubricated gel was applied
The door gasket is replaceable by an authorised service agent. If the door gasket comes off while cleaning, it can be pushed back into the groove.
Requests Do not use the following items for cleaning. (Otherwise, the surface will be scratched or corroded.)
Alkaline or weak Alkaline
Kitchen detergents (They crack plastic!)
Egg shelf / Bottle shelf
Cleanser or soap powder
Removing 1 Lift it upward, alternating between the right and left side.
Attaching 2 Placing it on both supporters, and then press until it reaches the
end of supporters.
Benzine, thinner, alcohol, acid, petroleum
Scrubber
Hot Water
Once every 3 months
27
How to Clean the Refrigerator
Tray
Once every 3 months
Removing
1 Lift up the back of the tray and pull it forward. Once the protrusions of
the tray are unhooked from the rails, tilt the tray and remove it.
Attaching 2 Push the tray until it reaches the end lock.
Remark
For easier to take the glass trays out from the refrigerator, please remove
door shelves and bottle shelves first.
The Glass tray vegetable case is cleaned by directly cleaning inside the
refrigerator. (Due to its fixed design.)
In case of attaching the tray and it does not lock, make sure that you did not
attach it into it the wrong tray.
Trays are made of glass and heavy. Please handle them with care so that they
do not fall and cause any damage or injury.
For attaching trays, hold them with the protrusion side down and firmly
insert.
Vegetable case / Freezer cases Vegetable case
Once every 3 months
Removing 1 Fully open both doors of the Fridge room 2 Remove Large door
shelves 4
(According to Parts identification in Page
12, 13 before removing the Vegetable
case.) 3 Pull the case forward until it reaches the
end and gently lift the front of the case to
remove it completely.
Attaching 1 Insert the case into the shelf. 2 Gently lift the case and push
forward
until it reaches the end. 3 Install Large door shelves 4 into the
doors.
Freezer cases Skip the steps of removing and installing the Large door shelves
4. Remove and install Freezer cases in steps same as Vegetable case.
28
Moisture control of vegetable case
Once every 3 months
1 After pulling out the Vegetable case, the Moisture control is located at the
back of the Vegetable case.
2 Slide the Moisture control upward to remove it.
Remark
After cleaning by water, wipe it or let it dry. For tough stains, dilute
(neutral) kitchen detergent, and gently wash with a soft toothbrush,
then rinse thoroughly with water.
Prime Fresh
Once every 3 months
Removing 1 Fully open both doors of the Fridge room 2 Remove Bottle shelves 5
(According
to Parts identification in Page 12, 13
before removing the Vegetable case.) 3 Pull the case forward until it reaches
the end and gently lift the front of the
case to remove it completely.
Attaching 1 Insert the case into the shelf. 2 Gently lift the case and push
forward
until it reaches the end. 3 Install Bottle shelves 5 into the
doors.
Water tank/Water filter (of the Auto Ice maker)
1 Open the lid and clean the Water tank with water. 2 Rotate the Water filter
to remove the hook and
remove the Water filter. 3 Gently wash the Water filter in water. 4 Remove the
seal rubber on the edge and clean it
with water 5 Put the Water filter and rubber back into place.
Remark
If there is water deposits or pipe blockages in the Water filter, ice may not
be made properly.
Weekly
Water supply tank
Water filter Rubber gasket
29
How to Clean the Refrigerator
Prime Freeze case
Once every 3 months
Removing 1 Pull out the Prime Freeze completely. 2 Lift the case, tilt it, and lift it out of the compartment diagonally.
Aluminum heat transfer plate (Note that the aluminum plate is easy to be scratched and deformed)
Attaching 1 Pull out the Prime Freeze case, lift the back of the case and hook
along the inner grooves until it matches and touches the end point.
Remark
The aluminum heat transfer plate can be removed; however, remember not to hold
it with wet hands when the aluminum plate is cold, as there may be a risk of
frostbite.
When removing or installing the case, be sure to grasp the tray handle with
your outstretched hand. Otherwise, the compartment door may accidentally hit
your finger. Please refer to the illustration above.
If cleaning by water, wipe the aluminum plate or allow it to dry before
reinstalling into the refrigerator.
Do not wipe the lubricant off the contact surface of the guide rail. If you
have wiped out the lubricant, please contact with the Service Center.
Ice box
Removing Lift and pull the Ice box forward until it is completely removed.
Attaching Push the Ice box until it reaches the end of the Ice box holder.
Once every 3 months
Remark Stop the Auto Ice making function before
cleaning the Ice box (Page 21).
30
Ice tray
Once every 3 months
The Ice tray can be cleaned by using the Auto Ice Clean function (Page 21). In addition, the Ice tray can be removed and cleaned manually.
How to clean the Ice tray manually.
Remove and clean the Ice tray
1 Choose the Auto Ice Off mode (Page 21).
Knob
2 Turn the knob on the Auto Ice maker to the unlocked position. Lock position
Unlock position
3 Pull the protruding side forward to remove the Ice tray.
4 Clean it with water. (Do not use sharp scouring pads to scrub
the surface of Ice tray. If the Ice tray is scratched, ice may not
be properly released, leading to a malfunction.)
Remark
Protrusion
The Ice tray and its frame cannot be separated.
Do not clean with dishwashers or dish drying rack.
Attaching 1 Push the Ice tray in until you hear a “click”.
Unlock position
Lock position
2 Turn the knob into the locked position. Ice cannot be made if the Ice tray is not locked. 3 Disable the Auto Ice Off mode (Page 21) to restart the Auto Ice makings.
Remark
Ice will not be made until the Auto Ice Off mode is turned off. Do not pour
water directly into the Ice tray after manual cleaning.
(That may cause ice cubes sticking together or a malfunction.)
Water tank/Water filter (of Water dispenser)
Removing Pull up the Water tank with both hands and tilt it slightly towards
you.
Attaching Insert the tip of the valve into the hole. Place both left and right
edges of the Water tank in the locked position. Push the Water tank all the
way down until it reaches the end point.
Weekly
Remark
When removing the Water tank for cleaning, if the rubber seal is inserted
reversely due to friction with the faucet, use your hand to push the seal
reversely to its original position.
The valve in the Water tank can be removed by turning it counterclockwise.
Replace filter 1 Open the lid at the right corner using a hand. 2 Lift the
filter straight out of the lock.
Replace with a new hygiene filter. Put the filter back to its original
position and close the lid tightly.
Notices
The hygiene filter should be replaced every 3 years or when appropriate. The
hygiene filter can be purchased at all authorized service center. Cleaning
filter Cleaning
filter element
31
Troubleshooting
Before you call for service, please check the following steps:
The refrigerator does not operate.
Check that the plug and its socket are in good condition. Check if there is
any problem on main fuse and electrical
system of the house.
Check by unplug and wait for 7 minutes before plugging it back in.
The refrigerator does not cool enough.
Check to be sure that light in Operation Panel is displayed at proper
position.
Check to see if the refrigerator is overloaded with stuff or there is any hot
foodstuff refrigerated inside.
Is the refrigerator exposed directly to sunlight or heat source? Is the
refrigerator door completely closed? Is the refrigerator door opened
frequently?
Outside
When the air humidity is high, there is a chance that moisture will condense on the refrigerator surface, around the door gasket or on the door surface. This situation will stop if the air humidity decreases. Please wipe it up with dry cloth.
Dew, frost appears.
Inside
Is the door closed firmly?
Is the door being opened and closed too frequently? Condensation inside the
refrigerator can also be caused by
leaving high-humidity foods uncovered or unwrapped.
When the humidity is high, the door is open for a long time, or when the
refrigerator contains too much food or makes too much ice, frost may form
inside the Freezer room at the location of the Freezer room case, Ice box or
the Prime Freeze case door. This is normal. Please wipe with dry and soft
cloth.
The refrigerator generates noise.
Check if the refrigerator is located on a stable floor or is installed
properly.
Check if there is any object in contact with the refrigerator.
Cracking sound within caused by the parts adjusting temperature which is
normal.
After installation, the refrigerator may make loud noise. The noise will be
less when the refrigerator has been cooled.
There may be a whistling sound inside the refrigerator when opening and
closing the door. This is caused by the air outside being drawn in through the
pipe on the backside of the refrigerator to better balance the air circulation
inside the unit.
32
Troubleshooting
Auto Ice making.
The inside is smelling.
The surfaces of the refrigerator is hot.
The normal sounds of refrigerator.
Light does not turn on.
The refrigerator does not make ice.
The ice does not form any ice cube
Unusual shape of ice cubes.
Do you store food with dry odor without wrapping it?
Because the refrigerator is equipped with the dew prevention and heat
radiation tubes, the surfaces of the refrigerator get warmer when operating.
The back and side plates may get warmer especially when starting up or if the
door is frequently opened and closed.
When the refrigerator starts operation, the sound like water flowing and
boiling water is created. This is the sound of the cooling liquid.
The noise is generated when the automatic defrost system operated. The
dilatation of the details inside the refrigerator in the
cooling process can cause sound “crack-crack”. You may feel that the operation
sound is larger because
the compressor operates in high-speed under the following conditions: the
refrigerator does not cool fully on the occasion such as using it for the
first time, opening/closing the door too frequently, the surrounding
temperature is high. The sound becomes more quiet after cooling fully.
Please contact Panasonic Service Center.
If the water in the tank does not decrease after a while, the ice maker is not
working.
The ice making process begins after the inside of the refrigerator is cold
enough. (It may take more than 24 hours to start the process)
Check if the Auto Ice Off mode is set. (Page 21) Be sure to fully push the
Water tank and Ice tray into place. Do not leave food in the ice maker. Do not
install or remove the Ice tray frequently. Check if the Water tank is almost
empty. If water spills on the Ice box, clean it up. Please contact Panasonic
Service Center.
Is the temperature of Freezer room set to a higher temperature than -20 °C?
Adjust to a lower temperature. (Page 15)
There are protrusions. The grooves of the Ice tray may be frozen. The ice
cubes are round or connected to other ice cubes.
Ice has been stored for a long time. (Ice cubes get round of connected by
sublimation.) The ice is small. Small ice cubes are made when there is no
water left in the tank.
33
Troubleshooting
The ECONAVI light does not come on normally.
The Operation Panel flashes.
Food becomes frozen.
The ECONAVI function does not work (the ECONAVI light does not come on).
The ECONAVI operation is rarely active.
The ECONAVI operation is stopped halfway.
The ECONAVI operation works too often (the ECONAVI light rarely turns off).
Are you adjusting the temperature of your refrigerator? Flashes during
adjusting. Please complete the setting or the
Operation Panel will stop flashing after 10 seconds.
Do you put the food near cold air holes? Do you adjust the temperature control
to less than 4 °C for the
Fridge room and/or -3 °C for the Prime Fresh room? Adjust to a higher
temperature. Do you put food in Prime Fresh room?
Are “Quick Freezing”, Prime Fresh+ room , Quick Ice Making, Prime Freeze case
in active? (Page 17)
When the temperature is not set at 4 °C for the Fridge room and -20 °C for the
Freezer room, the ECONAVI function does not activate automatically.
Is the door opened too often or are there hot food stored in the refrigerator?
The learning function can automatically disable the ECONAVI operation during
regular use.
Does the refrigerator display any error codes?
Is there a power failure? If there is a power failure, the data collected by
the learning function until the power failure will be lost. The ECONAVI
operation is rarely active until the learning function could collect the data
again.
If the automatic defrost function is enabled while the ECONAVI operation is
active, the normal cooling mode will be activated after the defrosting process
completes. As a result, the ECONAVI operation may be stopped during
defrosting/cooling.
Sometimes, the learning function restarts the normal cooling mode.
Is the light intensity sensor hidden? Are there any dirt or scratches on
Operation Panel of the light
intensity sensor? The ECONAVI operation may operate while the refrigerator
is in use depending on the usage conditions, but the cooling operation is
still maintained.
34
Troubleshooting
The food melts.
Not cold, no freezing.
Store frozen foods with the Prime Freeze case in a long period of time, or
store high-fat ice cream in the freezer. (The cooling performance of the Prime
Freeze case is rated with two stars.) (Page 18)
Do not place cold food next to hot food.
Freezing capacity may not be sufficient depending on the type of food,
packaging condition, storage capacity, and how often that the door is opened
and closed. Reset Prime Freeze. (Page 18)
Prime Freeze.
Stop working halfway.
Error display on Operation Panel.
If Prime Freeze is set during defrosting, the time display will start
counting, but the fan will stop and the food will not be cooled enough. After
defrosting, reset Prime Freeze.
If Quick Ice Making, Quick Freezing, Prime Fresh+ are set during the operation
of Prime Freeze, Prime Freeze will be stopped.
U10: Warning if doors are opened too long. Check that the doors are closed
properly.
The letter “H” and two digits are displayed on Operation Panel. For example:
H01 Please contact the Service Center for support.
35
Specifications
Model No.
NR-CW530X
Freezer Star Rating
Capacity (L) Gross/Storage (IEC62552:2007)
Total
Freezer
Fridge, Prime Fresh
Outside Dimensions Width x Depth x Height (mm)
Net Weight (kg)
Refrigerant Type
Cooling System
Rated Voltage (V) Rated Frequency (Hz)
495 186 309
750 x 750 x 1730 90
R600a Non-frost cooling. Refer to the rating label attached inside the
cabinet.
Panasonic Corporation
Website: https://www.panasonic.com © Panasonic Appliances Vietnam Co., Ltd.
2022