dji RS 3 Mini Compact Handheld Gimbal Mount User Guide
- June 9, 2024
- DJi
Table of Contents
v1.0
Quick Start Guide
RS 3 Mini Compact Handheld Gimbal Mount
Horizontal Shooting
Vertical Shooting
SAFETY GUIDELINES
Safety at a Glance
By using this product, you signify that you have read, understand, and accept
the terms and conditions of this guideline and all instructions at
https://www.dji.com/rs-3-mini. EXCEPT AS EXPRESSLY PROVIDED IN AFTERSALES
SERVICE POLICIES AVAILABLE AT
(WWW.DJI.COM/SERVICE), THE PRODUCT AND ALL
MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND
ON “AS AVAILABLE BASIS” WITHOUT WARRANTY OR CONDITION OF ANY KIND.
WARNING
- DJI™ RS 3 Mini is powered by a built-in battery through the grip. Users take full responsibility for all operations and usage.
- The grip should be used in temperatures from -10° to 45° C (14° to 113° F). Use of the grip in environments above 50° C (122° F) can lead to a fire or explosion. Use of grip below 0° C (32° F) can significantly reduce operation time.
- DO NOT disassemble or pierce the grip in any way or the battery may leak, ignite, or explode.
- DO NOT drop or strike batteries. DO NOT place heavy objects on the grip or charger.
- DO NOT heat batteries. DO NOT put the grip in a microwave oven or in a pressurized container.
- Contact DJI Support immediately if any of the components break in order to avoid further damage and risk of injury.
- DJI RS 3 Mini has built-in high precision sensors. Dropping or striking it in any way may cause permanent sensor damage, leading to abnormal functionality. Contact DJI Support immediately if this happens.
CAUTION
- DO NOT disassemble DJI RS 3 Mini or its accessories. Improper or poor handling could damage the gimbal.
- Make sure to keep DJI RS 3 Mini clear of dust and water. Otherwise, it may be damaged.
- Make sure to mount the gimbal firmly when using DJI RS 3 Mini in a high-speed situation.
NOTICE
- The motor can get hot after long operation times. Remain cautious and avoid touching it where possible.
- DO NOT obstruct the gimbal movements. Otherwise, you may injure your hand.
Specifications
| Model | P20M |
|---|---|
| USB Input | 5 V/2 A |
| Bluetooth Operating Frequency | 2.4000 GHz-2.4835 GHz |
| Bluetooth Transmitter Power | <4 dBm |
| Operating Temperature | -10° to 45° C (14° to 113° F) |
Compliance Information
FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: DJI RS 3 Mini
Model Number: P20M
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a articular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
ISED Compliance Notice
CAN ICES-003 (B) / NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference. (2)This device must accept any
interference, including interference that may cause undesired operation of the
device.
This equipment complies with RSS-102 radiation exposure limits set forth for
an uncontrolled environment.
End user must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter. The portable device is
designed to meet the requirements for exposure to radio waves established by
the CNR102.
EU & UK Compliance Notice
EU Compliance Statement: SZ DJI Osmo Technology Co., Ltd. hereby declares that
this device (DJI RS 3 Mini) is in compliance with the essential requirements
and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com
/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Environmentally friendly disposal
**** Old electrical appliances must not be disposed of together with the
residual waste, but have to be disposed of separately. The disposal at the
communal collecting point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these collecting points
or to similar collection points. With this little personal effort, you
contribute to recycle valuable raw materials and the treatment of toxic
substances.
DJI guarantees that warranty service will be provided for this product
starting from the date of purchase. The product’s warranty period depends on
the specific component type. The warranty period varies and can be up to 12
months (or longer where required by local law) for different components. For
more information about the warranty period and after-sales service policy,
please visit http://www.dji.com/service/policy.
Warranty policies may vary according to local laws and regulations.
The products purchased in Australia are complied with the DJI Products and
Australian Consumer Law hereinafter.
DJI Products and Australian Consumer Law
“DJI” means DJI TECHNOLOGY AUSTRALIA PTY. LTD. Address: 46 Indian Drive,
Keysborough, VIC 3173.
DJI guarantees that warranty service will be provided for this product
starting from the date of purchase. The product’s warranty period depends on
the specific component type. The warranty period varies and can be up to 12
months (or longer where required by local law) for different components. For
more information about the warranty period and after-sales service policy,
please visit http://www.dji.com/service/policy.
-
Warranty policies may vary according to the local laws and regulations.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you order one of our products in Australia, you have legal rights known as ‘consumer guarantees’ which apply for a reasonable time from the date of your purchase until the failure becomes apparent and regardless of the manufacturer warranty as provided in the DJI After-sales Policy. The manufacturer warranty therein applies in addition to the rights you have at law and are not intended to limit, modify or restrict your consumer guarantee rights in any way.
The cost of labor, materials, diagnostic testing, and return delivery is covered by DJI, if under the warranty. Under the following conditions during the warranty period (for the latest update of the warranty period of each product, spare part and accessory, please refer to DJI official website: http://www.dji.com/service/policy), the manufacturer warranty therein can be obtained.-
The following conditions must be met for obtaining the manufacturer warranty service:
• During warranty period, a product is normal used, as intended by the manufacturer.
• No unauthorized disassembling modification or installation has been performed.
• Labels, serial numbers, waterproof mark, false proof mark, etc. show no signs of tampering or altering;
• Valid proof of purchase doceurnents in Australia (tax invoice, register receipt, order number, or bank statement showing the transaction) are available. -
The manufacturer warranty does not cover the following:
• Crash or fire damage caused by non-manufacturing factors, including but not limited to, pilot errors.
• Damage caused by unauthorized modification, disassembly, shell opening not in accordance with official instructions or manuals.
• Damage caused by improper installation, incorrect use or operation not in accordance with the official instructions or manuals.
• Damage caused by a non-authorized service provider
• Damage caused by unauthorized modification of circuits, mismatch or misuse of battery and charger.
• Damage caused by flights which did not follow recommended instruction manuals.
• Damage caused by operation in bad weather (i.e. strong wind, rain, sand/ dust storm, etc ).
• Damage caused by operating the product in surrounding environment with electromagnetic interference (i.e. a mining areas, close to radio transmission towers, high-voltage wires, substations, etc.)
• Damage caused by operating the product in surrounding environment suffering from interference with other wireless devices (i.e. transmitter, video-link, Wi-Fi signals, etc.).
• Damage caused by operating the product at a weight greater than the safe takeoff weight as specified by the instruction manuals.
• Damage caused by a forced flight when components have aged or been damaged.
• Damage caused by reliability or compatibility issues when using unauthenticated third-party parts.
• Damage caused by operating the product with a low charged or defective battery.
• Uninterrupted or error-free operation of a product.
• Loss of, or damage to, your data saved in your product.
• Any software, whether provided with the product or installed subsequently.
• Failure of, or damage caused by any third party products, including those that DJI may provide or integrated into the DJI product at your request
• Any technical or other support by DJI, such as assistance with “how-to- questions and those regarding product set-up and installation.
• Products or parts with an altered identification label or from which the identification label has been removed. -
Miscellaneous
• You are responsible for shipping costs for refund, replacement or repair, provided always that your product is confirmed not to be covered under the manufacturer warranty by DJI.
• DJI technical staff will examine the product to identify the responsible party.
• If a product is out of the manufacturer warranty or does not belong to any manufacturer warranty issues, DJI will advise you of the cost of repair and return delivery prior to repair or send back the product.
• If your product is not covered by the manufacturer warranty, you can still request a paid repair service.
• You can contact DJI at support@dji.com or view our official website for more information.
The full terms and conditions of the manufacturer warranty are available at http://www.dji.com/service/policy.
For information on Australian consumer laws, please visit Australian consumer law website at http://www.consumerlaw.gov.au.
-
WE ARE HERE FOR YOU
Contact
DJI SUPPORT
|
---|---
https://www.dji.com/support| http://weixin.qq.com/q/02KmUtZg_2eF410000w03S
Points de collecte sur
www.quefairedemesdechets.fr
This content is subject to change.
Download the latest version from
https://www.dji.com/rs-3-mini
is a trademark of DJI.
Copyright © 2022 DJI All Rights Reserved.
SUBSCRIBE FOR MORE INFORMATION
References
- Anatel — Agência Nacional de Telecomunicações
- DJI - Official Website
- Support - DJI
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
- s.dji.com/guide22
- DJI RS 3 Mini - Move Light - DJI
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>