KAITHIN KRS-001-BLK Replacement Voice Remote User Manual

June 9, 2024
KAITHIN

KAITHIN KRS-001-BLK Replacement Voice Remote

KAITHIN-KRS-001-BLK-Replacement-Voice-Remote-fig-1

PRESS WORK: TRIM TO SIZE, SCORE, FOLD & GLUE WHEN SPECIFIED

  • SCALE: 100%
  • ASSEMBLED PACKAGE DIMENSIONS ( in Inches)
    • WIDTH: 5″
    • HEIGHT: 6″
    • DEPTH: N/A

PACKAGING MATERIALS, THICKNESS & SIZE

  • SUBSTRATE TYPE: 400 gsm Giftbox
  • WINDOW
  • INNER TRAY
  • MAGNET
  • VELCRO
  • SECURITY STICKERS: 020mm
  • HANG TAB
  • FOAM
  • CORRUGATED BOARD
  • PLASTIC BAG
  • MANUAL: 128gsm

PACKAGING TYPES

  • FOLDING CARTON: Print 4/0
  • FOLDING CARTON WITH DOOR PANEL
  • RIGIT GIFT BOX
  • CLAMSHELL
  • SLIDING/SLIPCASE
  • TRAPPED BLISTER CARD
  • BLISTER CARD
  • OTHER

PRESS SPEC COLOR REFERENCES

KAITHIN-KRS-001-BLK-Replacement-Voice-Remote-fig-2

ADDITIONAL PANTONE COLORS (NOT CMYK)

  • SOLID COLOR NAME:
  • NEON COLOR NAME:
  • METALLIC COLORS:
  • VENDOR’S FOIL NAME/NUMBER:

FILE SAVED AS

  • .ai = FULLY EDITABLE
  • -OUT.ai = OUTLINED
  • .pdf = Acrobat
  • .jpg = Flat image
  • .png = DIGITAL (transparent background)

APPROVAL CHECKLIST

  • PRIMARY DESIGNER: Glen Lipton
  • DATE: 11 /14/22
  • SECONDARY DESIGNER:
  • DATE:
  • APPROVED BY:
  • DATE:
  • AUTHORIZATION
  • SIGNATURES:

CDNTRDLSAT A GLANCE

KAITHIN-KRS-001-BLK-Replacement-Voice-Remote-fig-3 KAITHIN-KRS-001-BLK-Replacement-Voice-Remote-
fig-4

SUPPORTED MODELS:
Samsung6Series,7Series,8Series,QLE□Q60TU07TQOBT Series SmartTV,suchasRU9000-Tll800J- TU8300-Q60T-Q70T-ll80T – 0901 -U900TS -U950TS -LST7 -LS06 -RUBIXIJ -U50 -ll60 -U70 – 118011900-NU-8000-NU8500-Q6F-Q7F-Q7C- Q8F-Q9FSeries

INTRODUCTION

  • Use this remote control to replace your lost or broken Samsung remote to work your Samsung TV and sound bar (if applicable).
  • Although the remote is designed to be paired to the TV, it also transmits IR. So, this remote control can also be used as and IR remote control to allow for limited functionality with TV’s that have an IR remote control sensor.
  • This remote control can also be used to control functions on a compatible Samsung soundbar, if the soundbar is paired with the TV. The remote control will not control the soundbar if it is only connected to the TV with cables.
    Note: You can use the remote control up to 20 feet or more from the TV. The range may vary depending on the wireless environmental conditions.

INSTALLING THE BATTERIES

(Not Included)
Press and slide back cover off. Insert 2 AA batteries into the battery Compartment. Make sure that the positive and negative ends are facing in the correct direction. Close the rear cover again.

PAIRING YOUR REMOTE WITH YOUR SAMSUNG TV

  • Before using your remote control, you need to pair it with your Samsung TV.
  • After installing batteries, with the TV in standby mode, point the remote at the remote control sensor of the TV, and then press and hold the buttons labeled simultaneously for 3 seconds or more.

BATTERY CAUTIONS

  • To prevent battery leakage damage, remove the batteries when drained or if the product will not be used for an extended period.
  • When installing batteries, make sure to align the +/- direction correctly.
  • Do not mix old and new, or different types, of batteries.
  • Dispose of used batteries following your local regulations.

SAFETY AND CARE INSTRUCTIONS

  • Please read and understand all instructions before using this product.
  • If damage is caused by failure to follow the instructions, this warranty is null and void.
  • Keep these instructions.
  • Do not drop, puncture, or disassemble this product.
  • Do not expose this product to dripping or splashing of drinks or liquids of any kind.
  • Avoid long exposure to direct sunlight, which may cause damage.
  • Do not expose this product to open flames.
  • Do not use the product in a strong magnetic field.
  • Use a clean, soft cloth to clean. Do not use any corrosive cleaners/oils to clean.
  • Do not attempt to repair the device or open the unit as this will void the warranty.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment

ONE YEAR WARRANTY

Extreme warrants its products for one year against defects in manufacturing under regular consumer use with original receipt of retail purchase. We believe in our products and want to provide you with a replacement, if needed, but we have to know about the problem while the product is still under warranty. lf you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the products warranty the customer must provide proof of the retailers receipt. Any customers outside of the U.S, will be responsible for shipping and handling charges it a replacement is required that is not due to a manufacturing defect. If there is not a manufacturing defect, shipping and handling will be applied. Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device or personal property. For instructions about how to obtain warranty service for your product, please contact Customer Service: customerservice@xtremecables.com

FCC STATEMENT

  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Increase separation between equipment & receiver.
    • Consult the dealer or an experienced radio/TV technician for help.
  • This device must not be co-located or operating in conjunction with any other antenna or transmitter.

SPECIFICATIONS

  • Requires: 2xAA Batteries (Not Included)
  • Dimensions: 1.3″(w) x 6.3″ (H) x 0.9″ (D)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals