XTREME XHS7-2001-WHT Connected Home Smart WiFi Window or Door Sensor User Guide
- June 9, 2024
- Xtreme
Table of Contents
XTREME XHS7-2001-WHT Connected Home Smart WiFi Window or Door Sensor
GETTING STARTED
Thank you for choosing the Xtreme”” Connected Home Window/Door Sensor. This quick start guide will help you with setup and installation.
Package Includes:
- Smart Window/Door Sensor
- Quick Start Guide
What You Need:
CONNECT THE DEVICE
-
STEP 1
Download the free Xtreme Connected Home app from the App Store (for iPhones) or Google Play Store (for Android phones). -
STEP 2
Make sure your mobile device is connected to your 2.4GHz WiFi network. Open the app and click “Register” by following the on-screen instructions. After your initial sign-in. your app will remember your password and log you in automatically. You can also choose to manually log out under Settings in the Main menu.
-
STEP 3
Remove back cover by pressing the button on top of the sensor and pulling back on the cover. Power with 2 AAA batteries (not included).
If the LED is not blinking, then you are not in pairing mode. Reset the sensor by pressing the reset button for 5 seconds until ou hear the amera make a chime sound. -
STEP 4
After logging in, click “+” on the top right of the screen and select “Add device”.
-
STEP 5
Select Sensor category and confirm the indicator light is still rapidly blinking. Click “Confirm indicator rapidly blink”.
-
STEP 6
Confirm that the displayed WiFi network is your 2.4GHz WiFi network, enter your WiFi password and click “Confirm”.
-
STEP 7
Your Smart Window/Door Sensor will now be connected to the network. Confirm the settings for your device and then Click “Done”.
TIP: You can put your canmera directly in a room by selecting one of the available rooms. Click the 2 button to change the name of the product .
Your Xtreme” Connected Home Smart Door/Window Sensor is now ready to use. You can now view the sensor remotely and receive mobile alerts. We hope you enjoy using your Xtreme” Connected Home Smart Door/Window Sensor. For frequently asked questions and instruction videos, please visit our website at www.xtremeconnected.com.
INSTALLATION
- Insert 2 AAA batteries (not included).
- Install the sensor in desired location with double sided mounting tape.
LEGAL & WARRANTY
To see Warranty information and Certification Legal warnings, please see our
website. www.xtremeconnected.com
Message and Data rates may apply. If you have any questions about this product
contact the manufacturer for support, do not return to retailer.
Referenced brands and trademarks are for compatibility listing only, not
associated with this product. iPhone is a trademark of Apple INC., registered
in the US and other countries.
App store is a service mark of Apple Inc. Google Play and Google Play logo are trademarks of Google Inc.© 2022 Google Inc. All rights reserved. Amazon, Alexa and al related logos are trademarks of Amazon.com, Inc. or its affiliates.
FCC Compliance
This device complies with Part 15 of the FCC. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
TROUBLESHOOTING
HAVING TROUBLE WITH SETUP?
Don’t return this product to the retailer, we’re here to help. Please call us
at 855-999-8041 or visit
www.xtremeconnected.com for video tutorials,
updated manuals and more FAOs for your device.
My device won’t connect to my network!
- Make sure you are connected to your 2.4 GHz network and your device is blinking red before you start trying to connect your device.
- You may need to reset your device if you are having trouble. Check out page 2 for the location of your device’s reset button.
- To allow the app to locate the network, you may need to allow permissions for location and turn on your Bluetooth.
- If you are not certain what type of network you have, contact your Internet Service Provider and ask them to create a separate, dedicated 2.4GHz network. You can also do this manually in your router’s settings.
- Try moving to a spot closer to your router for connecting.
- You can also purchase a WiFi extender to increase your WiFi range and strength.
- In some cases, you can try using the secondary pairing mode by clicking “EZ Mode” on the Add Device screen. Follow the on-screen instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>