CUSTYPe B01 Ring Wireless Charging Bank Instruction Manual

CUSTYPe B01 Ring Wireless Charging Bank

Included in the product

Product introduction

Tips: To charge, you nee d to click the key switch. To close, you need to double-click the key switch quickly.

INSTALLATION INSTRUCTION

1. Charge through wireless magnetizer.
2. Charge through USB-C charging interface of data line.

USING INSTRUCTION

1. The mobile power is absorbed on the back of the mobile phone by magnetic suction.
2. Pull the ring of the mobile power supply and lay the mobile phone horizontally as the mobile phone holder.

Focus on Design

• Custype.com
• +852 62642563
• [email protected]
• @Custypebrand
• @Custype_brand
• @Brandcustype

Safety precautions

1. Please do not approach the magnetic card (ID card, bank card, etc.) with magnetic stripe or chip to avoid invalidation of theb magnetic card.
2. Please keep the direct distance between the implanted medical equipment (cardiac mask, implanted COchlea, etc.) and the product at least 20m to avoid potential interference to the medical equipment.
3. Do not touch liquids.
4. Do not disassemble.
5. Avoid dropping the product.
6. Avoid using at too low or too high temperature.
   The heating caused by wireless charging is a normal phenomenon (the ambient temperature will also affect the heating).

PRODUCT PARAMETER

• Product name: Ring wireless charging bank
• Product model: B01
• Lithium polymer battery capacity: 500OmAh
• Rated energy: 19.25Wh
• Rated capacity: 3100mAh
• Input: USB-C: 5V=3A, 9V=2A, 12V=1.5A
• Output USB-C: 5V=3A, 9V=2A, 12V=1.5A
• Wireless output: 15W-7.5W
• Product size: 10.26.82.7cm
• Weight: 165g

TIPS

• Recommend to connect USB wall adapter with PD, Quick Charge 2.0 / 3.0output to optimeze the charging efficiency
• You can also charge the mobile phone when charging the charging bank.
• Quick double press the ON key to close the power bank.
  Please pay attention t electricity consumption during use

WARRANTY CARD

• Thank you for purchasing the CUSTYPE product.
• Our product’s warranty period is 12 months starting from the date of purchase. Within the warranty period free service will be provided to the consumer. if the product has any quality problems(reequipping warranty card with distributor’s official stamp and valid S/N).
• It cannot be returned or replaced under the following conditions;
  • No valid warranty card or warranty card incompatible
  • Malfunction caused by artificial damages(like external impact or submerging product into water, etc.)
  • Misuse of the product User has not followed the instructions in the manual.
  • Product disassembled or repaired by individual or unauthorized service center
  • Damages caused by storing the product in a hot or humid environment

Dealers Information

User’s Information

FCC Statement

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>