CUSTYPe W01 Wireless Charger User Manual

: June 9, 2024
: CUSTYPe

Table of Contents

CUSTYPe W01 Wireless Charger
Included In the product
Product Introduction
USING
Safety precautions
Product parameters
Warranty card
FCC STATEMENT
Focus on Design
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CUSTYPe W01 Wireless Charger

Included In the product

Product Introduction

Insert the bracket towards the leather belt. Pay attention to the positive and negative positions.
Pay attention to the positive and negative positions. and follow the dialectical of the Shell contour.
The metal tube is inserted Into the groove of the back Shell and fixed by rotation.

USING

It can be placed vertically or horizontally for wireless charging.
During charging, Check the charging condition through the mobile phone. If the charging falls, check her the charging cable and mobile phone are placed In the center.

Safety precautions

Please do not approach the magnetic card (ID card, bank card, etc.) with a magnetic stripe or chip to avoid the invalidation of the magnetic card.
Please keep the direct distance between the implanted medical equipment (cardiac masK, implanted cochlea, etc.) and the product at least 20m to avoid potential interference to the medical equipment.
Do not touch liquids.
Do not disassemble.
Avoid dropping the product.
Avoid using at too low or too high a temperature.
The heating caused by wireless charging is a normal phenomenon (the ambient temperature will also affect the heating).

Product parameters

Product name: Wireless charging bracket
Product model: WO1
Input: USB-c 5V=3A, 9V=-2A
Wireless output: 15W (Max)
Product size: 16.6 8.6 7.2mm
Product weight: 149.4g

Tips: Recommend connecting USB wall adapter with PD, Quick Charge 2.0 / 3.0 output to optimize the charging efficiency.
Please pay attention to electricity consumption during the use.

Warranty card

Thank you for purchasing the CUSTYPE product. Our product’s warranty period is 12 months starting from the date of purchase. Within the warranty, period free service will be provided to the consumer if the product has any quality problemsírequinng the warranty card with the distributor’s official stamp and valid S/N). Paid service: customer will incur a repair charge as follows;

No valid warranty card or warranty card is incompatible
Malfunctions caused by artificial damages(like external impact or submerging product into water, oct.)
Misuse of the product User has not followed the instructions in the manual.
Product disassembled or repaired by an individual or unauthorized service center
Damages caused by storing the product in a hot or humid environment
Defects or malfunctions due to force majeure.

Dealers Information

Dealer Name……………..
Product Type………………..
Tel……………….
Warranty Content………………….
ADD……………………..

User’s Information

Model No……………………..
User’s Name………………..
Product Name………………….
Tel…………………..
Warranty Content………………..
ADD………………….

Please fill in the warranty card for any waranty service

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.