POTTER SCA/DCA Single/Dual Channel Amplifiers Owner’s Manual
- June 9, 2024
 - POTTER
 
Table of Contents
SCA/DCA
Single/Dual Channel Amplifiers
Features
- 25W, 50W and 100W amplifier
 - 25VRMS and 70VRMS audio power
 - 8 Class A or 8 Class B speaker outputs
 - P-Link device
 - Single channel and dual channel amplifiers
 - 120VAC or 240VAC with battery charger circuit
 - Maximum of 31 amplifiers
 

Description
The SCA and DCA amplifiers are a new addition to the Potter proprietary P-Link device catalog. Potter offers seven variations of amplifiers with wattages up to 100W to support small, medium, and hi-rise applications. The amplifiers have the capability to distribute up to two audio channels simultaneously across multiple speaker zones. Each amplifier is supplied with a stacker terminal block to provide accommodations for 8 Class B or 8 Class A speaker outputs. The SCA and DCA amplifiers offer output power at 25VRMS and 70VRMS.
Up to 31 amplifiers can be linked to the IPA-4000V panel and offer up to 248 Class B or Class A speaker outputs.
The DCA-10025 (Dual Channel, 100W, 25VRMS Amplifier) may be programmed to provide an extraordinary 200W for single channel applications via Potter Fire Panel Programmer.
The 70V-1000 converter module will extend output power to 70VRMS on the DCA dual channel amplifiers. The BUA-1000 backup amplifier provides a failsafe solutions for potential lapse in service and compatible with the DCA dual channel amplifiers.
Technical Specifications
Standby Current| SCA-2525 – 58 mA
SCA-2570 – 58 mA
SCA-5025 – 58 mA
SCA-5070 – 58 mA
SCA-10070 – 60 mA
DCA-5025 – 48 mA
DCA-10025 – 48 mA
---|---
Alarm Current| SCA-2525 – 608 mA
SCA-2570 – 608 mA
SCA-5025 – 608 mA
SCA-5070 – 608 mA
SCA-10070 – 766 mA
DCA-5025 – 520 mA
DCA-10025 – 520 mA
Operating Temperature| 0°C-49°C (32°F-120°F)
Operating Humidity Range| 10%-93% @ 30°C (86°F) noncondensing humidity
Maximum P-Link Length| 6500 ft.
Maximum V-Link Length| 6500 ft.
Maximum Amplifiers| 31
Size (WxHxD)| SCA Enclosures (WxHxD) – 16” x 17” x 3 7/8”
DCA Enclosures (WxHxD) – 19” x 27 3/8” x 4 5/8”  
Installation
The SCA and DCA amplifiers communicate in conjunction with the IPA4000V using a RS-485 connection via P-Link. The SCA amplifiers are equipped with one V-Link and the DCA amplifiers provide two V-Link to receive audio from the IPA-4000V.
Accessory List
| Model | Description | Accessories | 
|---|---|---|
| SCA-2525 | SINGLE CHANNEL 25W, 25V AMPLIFIER | None | 
| SCA-2570 | SINGLE CHANNEL 25W, 25V OR 70V SELECTABLE AMPLIFIER | None | 
| SCA-5025 | SINGLE CHANNEL 50W, 25V AMPLIFIER | None | 
| SCA-5070 | SINGLE CHANNEL 50W, 25V OR 70V SELECTABLE AMPLIFIER | None | 
| SCA-10070 | SINGLE CHANNEL 100W, 25V OR 70V SELECTABLE AMPLIFIER | None | 
| DCA-5025 | DUAL CHANNEL 50W, 25V AMPLIFIER | 70V-1000 | 
BUA-1000
DCA-10025| DUAL CHANNEL 100W, 25V AMPLIFIER| 70V-1000
BUA-1000  
Wiring Options
SCA-2525, SCA-2550, SCA-5025 and SCA-5070 Connections

- 120VAC 50Hz-60Hz 240VAC 50Hz-60Hz Connect to separate unswitched AC circuit
 - Battery connection (non-power limited).
 - Use two (2) 12V batteries connected in series
 - In from previous P-Link Device
 - Out to P-Link Device
 - Out to V-Link 1 (SCA or LOC-1000)
 - In from previous V-Link 1 (IPA-4000V, SCA or LOC-1000)
 - 15K EOL Class B Circuit
 - Class A Circuit
 
SCA-10070 Connections

- 120VAC 50Hz-60Hz 240VAC 50Hz-60Hz Connect to separate unswitched AC circuit
 - 120/240 VAC Jumper Position
 - Battery connection (non-power limited). Use two (2) 12V batteries connected in series
 - In from previous P-Link Device
 - Out to P-Link Device
 - Out to V-Link 1 (SCA or LOC-1000)
 - In from previous V-Link 1 (IPA-4000V, SCA or LOC-1000)
 - 15K EOL Class B Circuit
 - Class A Circuit
 
Class A P-Link Wiring

- CA-6500 Connection
 - Panel Connection
 
Class B P-Link Wiring

- Panel Connection
 - To the next device
 
Class A V-Link 1 Wiring

- VM-1000 Connection
 
Class B V-Link 1 Wiring

- VM-1000 Connection
 - To the next device VLINK 1
 - (15K EOLR on last device)
 
Class A V-Link 1 and V-Link 2 Wiring

- VM-1000 Connection
 
Class B V-Link 1 and V-Link 2 Wiring

- VM-1000 Connection
 - To the next device VLINK 1
 - To the next device VLINK 2
 - (15K EOLR on last device)
 
Ordering Information
| Model | Description | Stock No. | 
|---|---|---|
| SCA-2525 | SINGLE CHANNEL 25W, 25V AMPLIFIER | 3520667 | 
| SCA-2570 | SINGLE CHANNEL 25W, 25V OR 70V SELECTABLE AMPLIFIER | 3520668 | 
| SCA-5025 | SINGLE CHANNEL 50W, 25V AMPLIFIER | 3520662 | 
| SCA-5070 | SINGLE CHANNEL 50W, 25V OR 70V SELECTABLE AMPLIFIER | 3520663 | 
| SCA-10070 | SINGLE CHANNEL 100W, 25V OR 70V SELECTABLE AMPLIFIER | 3520666 | 
| DCA-5025 | DUAL CHANNEL 50W, 25V AMPLIFIER | 3520659 | 
| DCA-10025 | DUAL CHANNEL 100W, 25V AMPLIFIER | 3520660 | 
Potter Electric Signal Company, LLC · St. Louis, MO · Phone: 800-325-3936 · www.pottersignal.com
8830185 – REV A
Documents / Resources
|
POTTER SCA/DCA Single/Dual Channel
Amplifiers
[pdf] Owner's Manual
SCA DCA Single Dual Channel Amplifiers, SCA DCA, Single Dual Channel
Amplifiers, Dual Channel Amplifiers, Channel Amplifiers
---|---
|
POTTER SCA/DCA Single/Dual Channel
Amplifiers
[pdf] Owner's Manual
SCA DCA Single Dual Channel Amplifiers, SCA DCA, Single Dual Channel
Amplifiers, Dual Channel Amplifiers, Channel Amplifiers
|
POTTER SCA/DCA Single/Dual Channel
Amplifiers
[pdf] Owner's Manual
SCA DCA Single Dual Channel Amplifiers, SCA DCA, Single Dual Channel
Amplifiers, Channel Amplifiers
|
POTTER SCA/DCA Single/Dual Channel
Amplifiers
[pdf] Owner's Manual
SCA DCA Single Dual Channel Amplifiers, SCA DCA, Single Dual Channel
Amplifiers, Dual Channel Amplifiers, Channel Amplifiers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>