POTTER DACT-5000 Digital Alarm Communicator Transmitter Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
DACT-5000
DIGITAL ALARM COMMUNICATOR TRANSMITTER
-
SIA or Contact ID reporting formats
-
Bi-Colored telephone line status LED’s
-
User set daily test
-
Simplistic Programming with CFG-5000
-
Directly mounts in fire alarm cabinet
-
-
Description
The DACT-5000 Digital Alarm Communicator Transmitter allows the PFC-5000
series fire alarm control panel to call a Central Station and report a local
Fire Alarm, Trouble Condition or Supervisory Condition (except PFC-5002). When
properly installed with two phone lines, the DACT-5000 supervises the lines
and can be programmed with the Security Industry Association (SIA) Digital
Communications Standard (DCS) or the Ademco Contact ID protocols. The
DACT-5000 mounts directly to the PFC-5000 series cabinet and is powered
directly from the main fire alarm panel. The CFG-5000 Configuration Tool is
required to program the DACT-5000.
Wiring Schematic
Engineering Specification
The contractor shall furnish the DACT-5000 Digital Alarm Communicator
Transmitter for communicating an alarm, trouble or supervisory condition to a
monitoring station. The DACT shall be UL listed and be compatible with the
PFC-5000 series fire alarm control panels. The communicator shall have the
capability to supervise the attached phone lines and report a line failure.
The DACT shall be capable of seizing a phone line, dialing and communicating
on the line. The DACT shall be installed in front of any private telephone
systems in order for the line to be seized and utilized for dialing the
monitoring station. The DACT shall have two LED’s that indicate line status.
The LED’s shall be off when not in use, a red LED shall indicate the line in
use and an amber LED shall indicate a line fault.
A trouble condition shall be communicated if a telephone line signal is loss, regardless of which telephone line. In addition, a signal shall be transmitted indicating a restoral of telephone service. If both telephone lines fail, a trouble condition with activation of the trouble relay shall activate on the main control panel and the buzzer shall sound. The DACT-5000 shall be capable of transmitting in either the Security Industry Association (SIA) Digital Communications Standard (DCS) and the Ademco Contact ID formats. The DACT shall be programmed to send a test report once a day at a specified time. The DACT-5000 shall be programmed using the Potter CFG5000 Configuration Tool.
Potter Electric Signal Company · 2081 Craig Road, St. Louis, MO, 63146-4161 · Phone: 800-325-3936/Canada 888-882-1833 · www.pottersignal.com
PRINTED IN USA MKT. #8910204 – REV A
Documents / Resources
|
POTTER DACT-5000 Digital Alarm Communicator
Transmitter
[pdf] Owner's Manual
DACT-5000 Digital Alarm Communicator Transmitter, DACT-5000, Digital Alarm
Communicator Transmitter, Alarm Communicator Transmitter, Communicator
Transmitter
---|---
References
- Fire Alarm Resources | Download fire alarm documents
- Potter Electric: Fire Alarms & Fire Sprinkler Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>