POTTER EBP-401 Long Range Door Annunciator System Owner’s Manual
- June 9, 2024
- POTTER
Table of Contents
EBP-401
LONG RANGE DOOR ANNUNCIATOR SYSTEM
- Intelligent microprocessor driven system
- 40 ft. detection range across doorway
- Four user selectable chime sounds
- Advanced circuit integrated with active-infrared beam technology
- High/low volume control
- Expandable using additional chimes (CM-5)
Stock number: 4130030
The EBP-401 is a surface mount, 40 ft., long range annunciator system using active infrared technology. This invisible single infrared beam triggers a pleasant chime sound when the infrared beam is interrupted. The system can be installed anywhere inside the buildings where traffic surveillance is required.
Complete Kit Includes:
1 Electronic chime
1 Infrared sensor
1 Reflector
1 Power transformer (12V AV 20VA)
1 Long plastic bracket
1 Metal short bracket
1 Short plastic bracket
1 6 ft. power cord with in-line switch
1 26 ft. 2-conductor wires
6 3/4″ sheet metal screws
1 3/8″ bolt w/locking washer
2 5/8″ machine screws w/washers and nuts
1 Manual
Electronic Chime Infrared Sensor 26 ft Wires
Power Transformer (12VAC 20VA) Reflector
Long Plastic and Short Metal Mounting Bracket Short Mounting Bracket
6 ft Power Cords With In-line ON/ OFF Switch Hardware
Wiring Diagram
- Transformer
- Power Switch
- EBPT-401
- GND: White/Black
- CM-5
- 2~3 Feet Min.
- Power ON/OFF Switch
Installation
NOTICE
If necessary, use cable ties to keep wires safely out of the way to avoid
tripping.
A Rear Mount
B Side Mount
1. Lock Washer
2. Screw
-
ALIGNMENT LED LIGHTS UP WHEN THE REFLECT OR ALIGNMENT IS SUCCESSFUL.
-
Reflector
-
3/8″ Bolt
-
5/8″ Screw
-
Meta l Short Bracket
-
Locking Washer
-
Nut
-
Short Plastic Bracket
Specifications
| Part Information | EBP-401 |
|---|---|
| Description | Long Range Wired Annunciator System |
| Detection method | Active infrared |
| Detection range | 40 ft. |
| Maximum transmission range | 1000 ft. AWG#22 2P wire |
| Power source | Sensor: 12V AC/DC, 20VA |
Chime: 12V DC, 10VA
Power consumption: Standby| Sensor: 50mA
Chime: 100mA
Power consumption: In alarm| Sensor: –
Chime: 500mA
Volume level| 80dB (low) – 95dB (high)
Chime sounds selection| Selectable among 4 sounds by a dip SW
Chime sounds level selection | JP1 (Jumper SHORT LOW Jumper OPEN HIGH)
Response time| 4m sec.
Light source| Infrared pulse beam 950mm
Installation location| Indoor
Infrared beam interception warning| Sensor: JP1 selectable OFF/10 sec/60
secretary
Install setting| Transformer Power ON – Red Alignment LED ON – Transformer
Power OFF – Transformer Power ON – Setting
Power switch| Yes
Temperature| 14°F – 122°F (-10°C – 50°C)
Weight| Sensor: 125g
Chime: 164.4g
Dimension: (W x H x D)| Sensor: 2 1/2” x 1 7/8” x 3 7/16”
Chime: 4 7/8” x 3 1/2” x 1 3/8”
PRINTED IN USA MKT. #8850053 – REV B
Documents / Resources
|
POTTER EBP-401 Long Range Door Annunciator
System
[pdf] Owner's Manual
EBP-401 Long Range Door Annunciator System, EBP-401, Long Range Door
Annunciator System, Door Annunciator System
---|---
|
POTTER EBP-401 Long Range Door Annunciator
System
[pdf] Instruction Manual
EBP-401 Long Range Door Annunciator System, EBP-401 Long, Range Door
Annunciator System, Door Annunciator System, Annunciator System
References
- Fire Alarm Resources | Download fire alarm documents
- Potter Electric: Fire Alarms & Fire Sprinkler Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>