sygonix 2380483 LED Night Light with USB Power Supply Ports Instruction Manual
- June 4, 2024
- Sygonix
Table of Contents
- sygonix 2380483 LED Night Light with USB Power Supply Ports
- Intended use
- Latest product information
- Description of symbols
- Safety instructions
- Product overview
- Establishing the power supply Connect the product to the mains power
- Operation
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
sygonix 2380483 LED Night Light with USB Power Supply Ports
Intended use
The product is an LED night light with USB power supply ports. Use the product:
- As a night light to power and charge compatible devices via the USB power supply ports The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. as a night light to power and charge compatible devices via the USB power supply ports The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.
- Product
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in this document. Always read this information
carefully.
The symbol warns of dangerous voltage that can lead to personal injury by
electric shock. Read the information carefully.
This product must only be used in dry, enclosed indoor areas. It must not be-
come damp or we
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
Handling
- If it is no longer possible to operate the product safely, take it out of operation and pro-tect it from any accidental use. Safe operation can no longer be guaranteed if the product:
- Is visibly damaged,
- Is no longer working properly,
- Has been stored for extended periods in poor ambient conditions or
- Has been subjected to any serious transport-related stresses.
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
- Consult an expert when in doubt about the operation, safety or connection of the appliance
Operating environment **
**
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
Electrical safety
Do not tamper with power supply components. Risk of death by electric shock!
- Always ensure proper connection.
- Never use damaged power supply components.
- Connect the product to a mains socket that can be accessed easily.
- Only connect the product to a mains socket connected to the public supply. Before connecting,
- Check whether the voltage stated on the rating plate complies with the voltage of your electricity supplier.
- Never connect or disconnect the product if your hands are wet. There is a risk of electric shock.
- For safety reasons, disconnect the product from the mains socket during storms.
- Do not touch the product if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
- Switch off the mains supply to the product (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Remove the product from the mains socket.
- Do not use the product again. Prevent others from using it. Do not modify power supply components.
Connected devices
Also observe the safety and operating instructions of any other devices which are connected to the product.
LED light
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!6
Product overview
1 USB power supply ports 2 Light 3 Light control button
Establishing the power supply Connect the product to the mains power
supply.
Connect the product to the mains power supply.
Operation
Controlling the light
- Use the light control button to switch the light on/off and adjust the brightness.
- Tap the light control button to switch the light on.
- Touch and hold the light control button to adjust the brightness.
- After use, tap the light control button to switch the light off.
Powering USB devices
Use the light control button to switch the light on/off and adjust the brightness.
- Tap the light control button to switch the light on.
- Touch and hold the light control button to adjust the brightness.
- After use, tap the light control button to switch the light off.
Powering USB devices
Power and charge compatible devices via the USB power supply port(s).
- Make sure the device meets the following specifications:
- Voltage: 5 V/DC
- Current consumption: max. 1 A
- Connect the device to one of the USB ports with a suitable USB cable.
- Power is supplied to the connected device.
- After use, disconnect the USB cable.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>