Indesit TIAA 10 V.1 Freestanding Fridge-Freezer Instructions Manual

Indesit TIAA 10 V.1 Freestanding Fridge-Freezer

Assistance

Before calling for Assistance:

• Check if the malfunction can be solved on your own (see Troubleshooting).
• If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre

Communicating:

• type of malfunction
• appliance model (Mod.)
• serial number (S/N)

This information can be found on the data plate located on the bottom left side of the refrigerator compartment. Never call on unauthorized technicians and always refuse spare parts which are not originals.

Description of the appliance

Overall view

The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

1. Leveling FEET
2. FRUIT and VEGETABLE bin
3. SHELVES*
4. TEMPERATURE REGULATING Knob
5. PURE WIND*
6. FREEZER and STORAGE compartment
7. Removable multipurpose SHELVES*
8. BOTTLE shelf

Assembling the Freestanding Fridge-Freezer

The steps are shown in the following:

Installation

• Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation, and for care of the appliance.
• Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains.

Before inserting the plug into the electrical socket ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).
• The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorized technician to replace it (see Assistance). Do not use extension cords or multiple sockets.
  • Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.
  • The cable must not be bent or compressed.
  • The cable must be checked regularly and replaced by authorized technicians only (see Assistance).
  • The manufacturer declines any liability should these safety measures not be observed.

Start-up and use

Starting the appliance

• Before starting the appliance, follow the installation instructions (see Installation).
• Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.

1. Insert the plug into the socket and ensure that the internal light illuminates.
2. Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours, you will be able to put food in the refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the TEMPERATURE

• ADJUSTMENT knob.
• 1 = warmest 5 = coldest

We recommend, however, a medium position. The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During operation, the back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused. Do not worry, the refrigerator is functioning normally. If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically). In static appliances, the air circulates in a natural way: the colder air tends to move downwards as it is heavier.

The food should be stored as follows:

• Food Arrangements inside the refrigerator
• Fresh fish and meat Above the fruit and vegetable bins
• Fresh cheese Above the fruit and vegetable bins
• Cooked food On any shelf
• Salami, loaves of bread, and chocolate On any shelf
• Fruit and vegetables In the fruit and vegetable compartment bins
• Eggs On the shelf provided
• Butter and margarine On the shelf provided
• Bottles, drinks, and milk On the shelves provided

PURE WIND

It is recognizable due to the presence of the mechanism on the top part of the refrigerator compartment (see diagram).

Pure Wind maximizes air circulation, improving the efficiency of the evaporator and helping to achieve the optimal temperature inside the refrigerator as quickly as possible each time it has been opened. The blown air (A) is cooled when it comes into contact with the cold wall, whereas the hotter air (B) is sucked up (see diagram). Pure Wind Plus products are also equipped with a filter which, thanks to the inclusion of silver ions, makes it possible to reduce bacteria by 70% and to eliminate odors inside the refrigerator unit, thereby guaranteeing improved food storage. If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically).

Using the refrigerator to its full potential

• Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw foods.
• Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.

SHELVES: with or without a grill.

Due to the special guides, the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.

TEMPERATURE  Indicator light: to identify the coldest area in the refrigerator.

1. Check that OK appears clearly on the indicator light (see diagram).
2. If the word “ OK ” does not appear it means that the temperature is too high: adjust the REFRIGERATOR OPERATION knob to a higher ( colder ) position and wait approximately 10 hours until the temperature has stabilized.
3. Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting.

Using the freezer to its full potential

• Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten ( within 24 hours ).
• Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored above the grill in the freezer compartment and if possible be in direct contact with the walls ( side and rear ), where the temperature drops below -18°C and guarantees rapid freezing.
• Do not place glass bottles that contain liquids, and which are corked or hermetically sealed in the freezer because they could break.
• The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment ( for example Kg/24h: 4 ) Do not open the door during freezing.
• If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.
• If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced.

Maintenance and care

Switching the appliance off

• During cleaning and maintenance, it is necessary to disconnect the appliance from the electricity supply. It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact.

Cleaning the appliance

• The external and internal parts, as well as the rubber seals, may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach, or ammonia.
• The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.
• The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mold and unpleasant odors

• The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odor-free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.
• If you want to switch the appliance off for an extended period of time, clean the inside, and leave the doors open.

Defrosting the appliance

Follow the instructions below.
Do not speed up the defrosting process by using any devices or tools other than the scraper provided, you may damage the refrigeration circuit.

Defrosting the refrigerator compartment

The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily. The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily.

Defrosting the freezer compartment

If the frost layer is greater than 5 mm, it is necessary to defrost manually:

1. Set the TEMPERATURE ADJUSTMENT knob to the position.
2. Wrap frozen foods in newspaper and place them in another freezer or in a cool place.
3. Leave the door open until the frost has melted completely. This can be made easier by placing containers with lukewarm water in the freezer compartment.
4. Clean and dry the freezer compartment carefully before switching the appliance on again.
5. Wait for approximately 2 hours, i.e. until the ideal storage conditions have been restored, before placing food in the freezer compartment.

Replacing the light bulb

To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W).

Precautions and tips

The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives:

• 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;
• 89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;
• 2002/96/CE

General safety

• The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.
• The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.
• The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or moist hands and feet.
• Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.
• When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.
• Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact.
• In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.
• Do not use any sharp or pointed utensils or electrical equipment – other than the type recommended by the manufacturer – inside the frozen food storage compartments.
• Do not put ice cubes taken directly from the freezer into your mouth.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

• Observe local environmental standards when disposing of packaging material for recycling purposes.
• The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliances.
• Respecting and conserving the environment
• Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.
• Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.
• Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.
• Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.
• Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.
• Regularly check the door seals and wipe them clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

The internal light does not illuminate.

• The plug has not been inserted into the electrical socket, not far enough to make contact, or there is no power in the house.

The refrigerator and the freezer do not cool well.

• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position.
• The refrigerator or the freezer has been overfilled.
• The atmospheric temperature of the area surrounding the appliance is lower than 14°C.
• The food inside the refrigerator is beginning to freeze.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position.
• The food is in contact with the back inside the wall of the refrigerator.

The motor runs continuously.

• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high.
• The thickness of the frost exceeds 2-3 mm (see Maintenance).

The appliance makes a lot of noise.

• The appliance has not been installed on a level surface (see Installation).
• The appliance has been installed between cabinets that vibrate and make noise.
• The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

Some of the external parts of the refrigerator become hot.

• These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.

The back wall of the refrigerator unit is covered in frost or droplets of water

• This shows the appliance is operating normally.

There is water at the bottom of the refrigerator.

• The water discharge hole is blocked (see Maintenance).

FAQ’s

What temperature should an Indesit fridge freezer be set to?

The third setting on the thermostat or the midpoint of the indication line is what we advise you to use.

On a fridge freezer made by Indesit, where are the coils?

Typically, the condenser coils lie under the refrigerator. As refrigerant runs through them, they disperse heat. The condenser coils won’t adequately disperse heat if they are filthy.

Why do my Indesit refrigerator and freezer run nonstop?

The fridge freezer may operate longer if there is insufficient airflow around the outside of the cabinet, just as it may do if the thermostat is improperly set or malfunctions.

How can I avoid having my Indesit refrigerator freeze up?

Your Indesit appliance’s front will illuminate with an amber light if the rapid freeze switch or button has been activated. Just push the button (or flip the switch) to return the appliance to its default working mode if this is not necessary.

Which numbers on an Indesit refrigerator represent what?

The refrigerant power is shown by the numbers on the refrigerator’s temperature dial. The refrigerator will maintain a cooler temperature as the number rises. Your refrigerator will be the coolest when you set it to 5. With that out of the way, it should be emphasized that improved food storage does not necessarily equate to a lower fridge temperature.

The depth of a standalone refrigerator.

Sizes of freestanding refrigerators might vary. They typically measure 60 cm in width and 65 cm in depth, however, certain retro-style variants can be much larger.

Can a standalone refrigerator be built in?

Overheating from construction in a standalone unit might result in failure and steamy interiors. Learn the distinctions between under-counter and freestanding refrigerators and their installations to safeguard your refrigerator and your peace of mind.

What stops a freezer from freezing?

A very typical reason why combo refrigerator freezers don’t freeze is unclean condenser coils.

What does the Indesit refrigerator freezer’s rapid freeze button do?

Press the switch to “I” to turn “Fast Freeze” ON. In order to guarantee that the essential temperatures are attained fast, this switch engages vigorous cooling. Return the switch to the OFF position, or “0,” once the fresh food has been frozen. Make sure “Rapid Freeze” is turned off after 24 hours in order to save energy.

Do Indesit freezers have no frost?

With our Frost Free technique for home freezing, airflow is employed to prevent the buildup of frost, resulting in less maintenance and more space for food storage.

What is the fridge’s coldest number?

Some refrigerators operate on a setting that ranges from 1 to 5 but do not display the temperature. The refrigerating power is shown by the numbers on the refrigerator’s temperature dial. Thus, the fridge will be colder the higher the setting. The coldest setting for your refrigerator is number 5.

In a refrigerator, what number is hot?

Many Britons look forward to warm weather, but when it does, it’s crucial to be ready. The Food Standards Agency advises keeping your refrigerator between 3 and 5 degrees Celsius as one item to watch out for (FSA). Food might spoil more quickly as a result of the opportunity for germs to grow when the temperature rises.

What distinguishes a built-in refrigerator from a freestanding one?

The compressors on top of built-in refrigerators are the norm (as opposed to the bottom with most freestanding models).

What does “freestanding refrigerator” refer to?

In order to stand on their own at the end of cabinets or fit into surrounding cabinetry, freestanding refrigerators have both sides completed. This allows them to be moved about if your kitchen has to be reorganized.

Can you integrate a standalone refrigerator/freezer?

It’s just not intended to do so, therefore a freestanding fridge freezer won’t be able to fit inside a housing cabinet or have kitchen cabinet doors attached to it.

Download this PDF Link:Indesit TIAA 10 V.1 Freestanding Fridge-Freezer Instructions Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>