COOLAPA CW-104 65.6ft Led Strip Lights Instruction Guide
- June 9, 2024
- COOLAPA
Table of Contents
COOLAPA CW-104 65.6ft Led Strip Lights
Specification
- Color RGB (Red, Green, Blue)
- Brand COOLAPA
- Model CW-104
- Indoor/Outdoor Usage Indoor
- Light Source Type LED
- Light Color Multicolor
- Theme Holiday
- Occasion Christmas, Halloween
- Style Modern
- Controller Type Remote Control
- Number of Light Sources 360
What’s in the Box
- 2 x 10M Led Light Stipes
- IR Receiver
- Remote Control
- AC/DC Adapter
- Instruction Guide
Product Description
Led strip lights allow you to Tailor the strips to a specific length because the surplus section may be cut along the marks. Please make sure the power is turned off first. If cuts are unintentionally produced, they can be connected with a gapless connector.
-
Led Strip for a Party at Home
To create a romantic ambiance, the bar can be fitted with light strips. -
The led strip is Effective for Kitchens
Adapt the light hue to your preferences to make your kitchen colorful and lively. -
Laptop and Computer
If the strip is mounted in the back of TVs or computer desks, LED TV backlight lighting can lessen eyestrain. -
Adorn the Bedroom
Attractive bedroom décor will help you relax and appreciate the peace and quiet.
Precaution
- Apply this on a smooth, dry, and dry surface.
- Use of this 65.6ft led strip light is restricted to 12V.
- Prior to cutting, don’t forget to turn off the electricity.
Control via IR Remote and DIY Mode
- The image might not accurately depict the color of the actual product due to variations in displays.
- The package does not include connectors. If you want to reconnect or extend this LED strip light after you’ve cut it, connectors (which you must purchase on your own) are required.
- Apply this on a smooth, dry, and dry surface. At first, the adhesive must be kept glued down.
- Use of this 65.6ft led strip light is restricted to 12V.
Installation
-
The 44-key remote
Use the IR remote control after removing the clear chip. While using an IR remote, point it at the IR receiver. -
Simple Installation
Please make sure that the arrow marks on the connector and the strip light are on the same side. -
Linkable and Cuttable
To light the remaining strip if you cut them, you will need one additional power adapter. -
How to set up
Wherever the LED strip lights are to be attached, the surface should be thoroughly cleaned and kept dry.
Features
-
Different Lighting Modes
28 dynamic modes, including JUMP, FLASH, SLOW, and FAST. -
Control of Several Colors and Brightness
16 million possible color combinations and brightness controls. -
Mode for Many Colors
As LEDs have RGB 5050 SMDs, you can freely alter their brightness. There are 28 dynamic modes available, including swift, slow, leap, and flash. -
Several Scenes
LED strip lighting is non-radiative, safe, and won’t damage human eyes. widely used in furniture, windows, walls, doors, cabinets, and other interior features.
FAQs
Can I cut the strip light?****
Yes, you can cut the strip light.
Can I connect different colors?****
Yes, you can connect different colors with a connector.
Can I use this in my car?****
Yes, you can use it in your car.
How long is the strip light?****
The strip light is 10M/33ft long.
How many times can you cut LED strip lights?****
Following are the cutting distances: 30 LEDs per metre can be cut every 10 cm, 60 LEDs per metre can be cut every 5 cm, etc. Every 2.5 cm, 120 LEDs can be cut.
How long can you keep LED strip lights on?****
In contrast to incandescent bulbs, LEDs do not produce light by heating up. Since LED strips generate little heat, they are unlikely to overheat and catch fire. More robust and with a longer service life are LED strips. Hence, LED strips may be left on for a whole seven days a week.
Can you use LED strip lights more than once?****
LED strip lights must be correctly peeled off the wall using the previously outlined technique if you want to reuse them. You should wrap them carefully after peeling them off to prevent damage during transport. After that, you must reattach them to the new wall using the technique we just described.
Can you leave LED strip lights on all the time?****
Simply put, properly produced LED lights can be left on continuously, 24 hours a day, seven days a week. This is due to the fact that LEDs emit less heat than conventional sources of illumination, making them less likely to overheat or catch fire.
What is needed for LED strip lighting?****
LED strip lights require a 12V DC power source to function. This makes wiring the strips throughout the house much safer, although it does necessitate the installation of an AC/DC transformer. These flex strips make it simple to create a battery-operated LED light because batteries can also produce DC power.
Do LED strips use a lot of electricity?****
LED strip lights installed as your light source use less energy to create the same amount of light. LEDs use up to 85% less electricity than traditional incandescent lights and about 18% less electricity than CFLs, so there could be significant energy savings (Compact Fluorescent Lamps).
Do LED strip lights lose brightness?****
With LED strip lights, voltage decrease essentially equals light loss! This is an LED strip that is suffering voltage drop, which results in a decrease of brightness at the end. For instance: You should choose a 12v or 24v power source because most LED strip lights operate on a constant voltage of 12 or 24 volts.
What happens if LED Strips too long?****
You must trim off the excess length if the LED light strip you purchased is too long. You should take the proper length measurement first. Your effort will be useless if you unintentionally cut the strip too short.
Product Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>