Cmoonlight ST Series All-In-One Solar Street Light User Manual

Cmoonlight ST Series All-In-One Solar Street Light

CONSTELLATION SERIES
Thank you for choosing the constellation series solar Gemini light, For any questions, please email us.
Please refer to the actual products if the provided diagrams show slight differences

Before using the smart solar street light, carefully read the following precautions to avoid damage or errors.

Precautions

Operation Conditions & Limitations: 

This product 1s rated as IP66 protecbon
grade.Do not exceed the stated operating hmits, The operating temperature range ,s from -20°C to +80°C and the charging temperature limit 1s within O to 60″C. If equipped with heating features. it may be used between -40°C and +60 “C.The heavy-duty structure will survtve up to a category 12 typhoon or cyclone, (Storms above category 12 may cause damages to the product).

Transportation & Storage: 

• This product contains hlhrum batteri&s please follow air transport regulatJons when shipping. JI should be regarded as potentially flammable and explosive, and be isolated from other goods when stored. so as to avoid any damage,

• The solar panels of this product should be oons1dered as fragile There shoukt never be more than 4 layets of boxes when
  stacked.Toavoid damage to the panels, make sure no heavy pressure isapplied to the boxes. please store the product in temperature between O’C to 45°C.

• If stored for a long period. the product chould be recharged every 6 rnonthe, please only use the spec1aJ charger (purchased rrom manufac1urer) to avoid damage 10 the battery or device.

Product Maintenance:

• To ensure effecbve solar ltght absorbance. clean the surface of lhe panels regutady with water arr.I a soft cloth. Do not use chemical sotuuons or abrasives.
• This solar street light operates on a low voltage OC current Unless customized otheiwise, do no: connect components or ports to an AC current or any higher rated OC voltage
• Oo no1 replace the onglnal unit with uniuthorized third party parts as they may cause serious damage to the product To order replacement parts or to have them fitted, please visit http://a1b1te.en.made-m-chma.com or contact your k>cal distributor.

Product Recycling:

This product is made from recyclable.
high-performance materials, All matenals.are competent to the ROHS standard. do not dispose of his product with other household waste. Please check your local regulations on the collection aM disposal of electronic items. proper disposal of Jsed products helps prevent negative impacts on:he environment

Modification:

It is. not on the terms of the warranty if chents does modify or right the height leading to no-proper working without authorization of Albite.

Introduction

• Solar Gemini light series is extremely versatile, robust solar street light.
• It features all of its components fully integrated within an attractive and compact design. It combines a highly efficient adjustable solar panel with a ‘smart’ and ‘intelligent’ charge controller to energize a high-capacity lithium-ion battery that supplies power to the super-bright Bridgelux LEDs to achieve multiple features such as high luminance, long lifespan, minimal maintenance and easy installation.
• By choosing a wireless module and wireless concentrator, user can wirelessly control the light, monitor working status, set custom working mode or review historical charging data. solar Gemini light brings you a easier way to control outdoor lighting than even before.

Application

Multi options & wide usage:
From 20w to 120w, all-in-one solar lighting system can be used for a wide range of area lighting.

• Public areas & Parks & campuses
• Residential & Community Center
• Urban trunk road & slow lane
• Bike trails & Tourist attraction
• City stadium & Office district
• Parking lots & Entrance lighting
• Island & dock & Coastal
• Industry & Mining security & Perimeter
• Refugee camp & Tempoary Construction

Product Manual

PACKAGE INCLUDE

1. light body —-1 pc—
2. user manual —1pc—-
3. Remote controller —1 pc—

REMOTE CONTROLLER

• OFF Button. Turn on or turn off light.
• DEMO Button : Testing LED lamp mode, lamp power working by 20% ( for example: deraull is 0%, press again, it will be 20%, again, increase to 40%, 0%-100% available), Period time is 1 minute.
• L Button: Dusk to dawn mode (1 hours of 100%, 3 hours of 70%, 8 hours or 20%).
• T Button : Time and light control Mode (2 hours of 100%, 2 hours of 70%, 2 hours of 50%).
• M Button : Microwave Mode (Light turned on ror 12 hours, 100% sensor, 20% not sensor.
• U Button 2 hours of 100%, 2 hours of 70%, 2 hours of 50%; 6 hours, 50% sensor, 20% not sensor.

Introduction of PIR sensor

The wong working situations as below:

1. Ught flickers u1Hegularty.
2. The lamp is too sensitive, so it is always at 100% light, the battery can’t last long.
3. the sensor does not work, not light when people come close.

Factory settings and motion detection functions:
The factory setting of the Gemini light series switch is light-controlled. The lamp automatically lights up when it is dark and turns off when there is light or at dawn. At night, when no one is around, it operates under power saving mode. When anyone approaches, its brightness Increases by a factor off ours.If the air temperature is close to human temperature, the motion detection may reduce in sensitivity.

Install two songs

Installation

Environment:

Please select the appropriate angle according to the installation site’s sunlight intensity and required operating time. If you are In the northern hemisphere, face the solar panels towards the south as far as possible when installing the Gemini light series; if you are in the southern hemisphere, face the solar panels towards the north.

For maximum operation efficiency of the solar panel, make sure the sunlight is not blocked by buidings or trees.

Height and distance parameters:

Install according to the height and distance (between the lamps) restrictions as sel by each respective product type. consult our product specialists for spclal llghting requirements.

WARRANTY CARD

Maintenance records

Repair date| Maintanence project| Maintenance unit| Repairer signature
---|---|---|---

NOTE:

1. The product warranty period is three years since factory.
2. During the warranty period, any problem caused by normal use under the user manual (determined by the controller factory), reparation is free of charge.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>