TIMEX Expedition World Time Digital Smartwatch User Guide

: June 9, 2024
: Timex

Table of Contents

EXTENDED WARRANTY
FUNCTIONS
BASIC OPERATION
TIME/DATE/WORLD TIME CITY
WORLD TIME TABLE
CHRONOGRAPH
COUNTOWN TIMER
WORLD TIME
ALARM 1
ALARM 2
INDIGLO® NIGHT-LIGHT
WATER AND SHOCK RESISTANCE
BATTERY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TIMEX Expedition World Time Digital Smartwatch

Register your product at https://www.timex.com/product-registration.html

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made
within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex
Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FUNCTIONS

Real-time calendar clock, Chronograph with Split, Countdown Timer, World Time log, Two Daily Alarms, and INDIGLO® night-light.

BASIC OPERATION

TIME/DATE/WORLD TIME CITY

To set time, date, and world time city

From Time of Day mode, press and hold SET. The world time City Code can be seen flashing.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Note : Please refer to the World Time Table for available City Codes based on your GMT difference.
Press MODE to select DST (Daylight Saving Time) for that City Code. Press ADJ to select/deselect DST. The “DST” symbol will light at the bottom of the display to confirm daylight saving time is “on”.
Note : This option will only be offered for cities that observe DST. Please refer to the World Time Table for those cities.
Press MODE to set Seconds. Press ADJ or INDIGLO to set Seconds to zero adding one minute if seconds are “30” or greater.
Press MODE to set Hours, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set Minutes, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Year, as indicated by its flashing 2 digits. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Month number, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Date, as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Note : The Day of the Week is set automatically using the Year, Month and Date.
Press MODE to set the Time Format, as indicated by its flashing (12HR or 24HR). Press ADJ or INDIGLO to toggle the setting.
Press SET to exit Time Set.
Note: 12-Hour time has no indicator in the morning and a “PM” indicator after Noon.

WORLD TIME TABLE

Table

CHRONOGRAPH

Use this function for timing events.

Press MODE until “SP” appears.
Press ADJ to start timing.
With the stopwatch running, press SET to record a Split time. The stopwatch will continue timing in the background.
Press SET to release the display and show the current running stopwatch time.
Press SET to record another Split time.
Press ADJ to pause the timing.
Either press ADJ to resume timing, or press SET to reset the stopwatch to zero.
Note : If the stopwatch was paused when the display was showing a Split time, the first press of SET will show the final recorded time, and the second press will reset the stopwatch to zero.

COUNTOWN TIMER

Use this function for timing events or tasks that have a defined duration.

Press MODE until “TMR” appears.
To Set the Timer, press and hold SET. The Hour digit flashes.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Seconds as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Countdown Timer Set.
To Use the Timer, press ADJ to start timing.
With the timer running, press ADJ to pause the timer.
With the timer paused, press ADJ to re-start it or press SET to reset the timer to its originally set duration.
When the alert sounds, press ANY button to silence it, or it will stop beeping in about 10 seconds.
If no button is pressed, the timer will start counting UP and continue running for up to 24 hours. Press ADJ to pause the timer, and press SET to reset the timer to its originally set duration.
Note : When there are 30 seconds left, a single beep will sound. With 10 seconds left, the watch will beep every second as it counts down.

WORLD TIME

View the local time in any of the other 35 time zones tracked by the watch

Note : Refer to the World Time Table below for available City Codes based on your GMT difference

Press MODE until City Code appears. The local time will be displayed on the Top line and the corresponding world time will appear large on the Middle line.
Press ADJ to advance through the list of World Time zones. Press and hold to increment quickly.
To keep the local times accurate, you must have DST (Daylight Saving Time) correctly activated/deactivated. Press and hold SET to toggle the DST setting for each city code.

WORLD TIME TABLE

Table

ALARM 1

To set the first of 2 Daily alarms, to turn on/off Alarm 1, or to turn on/off the hourly chime.

To Set the Alarm

Press MODE until “AL1” (Alarm 1) appears.
Note : The current Time appears in the Top line of the display, and the Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.
Press and hold SET. The Hour digit flashes and the Alarm lights.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Alarm 1 Set.
When the Alarm sounds, press any button to turn off the alert, or it will continue for 20 seconds.

To Turn the Alarm 1 On/Off or to turn the Hourly Chime On/Off

Press MODE until “AL1” (Alarm 1) appears.
Note : The current Time appears in the Top line of the display.
Press ADJ repeatedly to turn:
a. the Alarm ( ) On,
b. the Hourly Chime ( ) On
c. the Alarm ( ) Off, or
d. the Hourly Chime ( ) Off
Press MODE to exit Alarm 1 mode.

ALARM 2

To set the second of 2 Daily alarms, or to turn on/off Alarm 2.

Press MODE until “AL2” (Alarm 2) appears.
Note : The current Time appears in the Top line of the display, and the Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.
Press and hold SET. The Hour digit flashes and the Alarm ( ) lights.
Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press MODE to set the Minutes as indicated by its flashing. Press ADJ to advance the setting or press INDIGLO to reverse the setting. Press and hold to increment quickly.
Press SET to exit Alarm 2 Set.
When the Alarm sounds, press any button to turn off the alert, or it will continue for 20 seconds.

Note : The Alarm set time will be presented in the same format (12HR or 24HR) as the Time mode.

To Turn the Alarm 2 On/Off

Press MODE until “AL2” (Alarm 2) appears
Note : The current Time appears in the Top line of the display.
Press ADJ repeatedly to turn:
a. the Alarm ( ) On, or
b. the Alarm ( ) Of

INDIGLO® NIGHT-LIGHT

Press INDIGLO ® button to illuminate watch display for 2 – 3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates entire watch face at night and in low light conditions. Any button pressed while INDIGLO® night-light is on keeps it on.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking or ( ) is indicated.

Water-Resistance Depth	p.s.i.a. * Water Pressure Below Surface
30m/98ft	60
50m/164ft	86
100m/328ft	160

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

Watch is water-resistant only as long as lens, push buttons and case remain intact.
Watch is not a diver watch and should not be used for diving.
Rinse watch with fresh water after exposure to salt water.
Shock-resistance will be indicated on watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on caseback. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY
http://www.timex.com/productWarranty.html