myepico Ellipse Wireless Car Charger Instructions
- June 6, 2024
- myepico
Table of Contents
myepico Ellipse Wireless Car Charger
Instructions Manuals
Epico Ellipse Wireless Car Charger is a magnetic phone holder to be fitted to a ventilation grille and a wireless charger in one device. Thanks to the strong magnet, it reliably holds the phone throughout the ride. The charger charges your iPhone with the latest series with an output power of 7.5W and other smartphones with an output of up to 15W.
Product specifications
Ellipse Wireless Car Charger
Output power: 15W & 10W & 7.5W
Input current/voltage: 5V/2.4A, 9V/2A
Output current/voltage: 5V/1A, 5V/1.5A, 9V/1.2A, 9V/1.67A
Input interface: USB-C
Material: aluminum alloy, plastic
Dimensions: 65x100x8mm
Weight: 90g
USB-C PD MINI CAR CHARGER
Input: 12-24V/1.8A
Output: 12-24V/1.8A (50-60Hz)
Maximum power: 18W
Material: ABS + PC
Dimensions: 43x24mm
Weight: 12g
USB-C Cable
Type: USB-C to USB-C
Material: PVC
Length: 1m
Weight: 20g
Package contents
1x Ellipse Wireless Car Charger
1x USB-C PD MINI CAR CHARGER
1x USB-C cable
1x Ventilation grile holder
1x Manual
Operating instructions
- Screw the ventilation grille holder to the charging base using the thread on the rear side of the charger.
- Attach the magnetic charger to the air conditioning ventilation grille.
- Use the USB-C cable to connect the charger to the USB-C socket in your car.
- You can recognize charging thanks to the LED indicator, which lights up blue for the entire charging time.
- Take your phone and bring it close to the front of the charger, which automatically grips it thanks to a strong magnet.
Safety instructions
Before using the car charger, be sure to carefully read the safety instructions below.
- If your phone falls down due to improper attachment during your drive, park your car in a suitable place and fix the phone securely and properly in the device
- Under all circumstances, pay maximum attention to your drive. Handling of the charger must not jeopardize driving safety in any case.
- Do not install the charger near an airbag. A released airbag might throw the charger and cause an injury of a car passenger.
- Before your drive, check the attachment of the charger so that it should not get released during the drive or the phone should not fall out.
Operating conditions and maintenance
- Do not use the charger near magnets.
- Only use the specific cables and power supply unit for the power supply.
- Do not expose the device to extremely high or extremely low temperatures. The operating temperature of the device is -10 to +55°C. Do not leave the charger in your car in the summer.
- Do not expose the charger to moisture. Possible moisture may cause short-circuiting of the electric wiring and damage the device.
- Before cleaning the device, disconnect the charger from the electric mains.
- Do not use detergents, alcohol, or other cleaners to clean the device. Use a clean and dry cloth.
- Do not throw the product and do not expose it to impacts or other physical harm.
- Do not disassemble the product or adapt it in any way; you might damage it and lose the manufacturer’s warranty.
- Do not leave the device near chips and chip cards, cardiac pacemakers, and other magnetic devices.
- If the product does not work, please, contact the manufacturer.
Disclaimer
This wireless car charger is only intended to be used in combination with a
suitable mobile device. Before the first use of the charger and new device
verify their mutual compatibility.
The manufacturer is not liable for possible damages of a mobile device or
other equipment caused by improper use of this product in any respect.
This symbol on the product or in the accompanying documentation indicates that the product must not be considered a regular municipal waste and must be disposed of in accordance with local regulations. Pass the product for environmentally safe disposal. Proper disposal of this product protects the environment. For more information, contact your local municipal waste disposal office, the nearest collection point, or your dealer.
This product complies with all the essential requirements of the EU directives that apply to it.