Style SELECTIONS FSI 1607 DORB Holdbacks Retenedores Instruction Manual
- June 12, 2024
- Style SELECTIONS
Table of Contents
Style SELECTIONS FSI 1607 DORB Holdbacks Retenedores
INTRODUCTIONS
- Thank you for purchasing this Style Selections product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product in-stead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
- If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 877-888-8225, 8 a.m. – 8 p.m., EST,
- Monday – Sunday. You could also contact us at partsplus@lowes.com.
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 10 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
• Visit lowes.com for more information.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents,
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Using holdback as a guide, adjust to desired height and mark location on wall for mounting screws.
- Remove holdback from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
- Attach holdback to wall using screws provided.
NOTE: Anchors are not needed for all installation types.
NOTE: Repeat steps 1 to 3 for additional holdback. Use level (not included) if necessary.
STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>