dals DCP-STKXX-BK LED Path Light Installation Guide

dals DCP-STKXX-BK LED Path Light Installation Guide

1 877 430 1818 www.dals.com
Download the free Dals Connect app

Dals Connect App TM

Landscape transformer, model DCP-TR60-BK, DCP-TR200-BK or DCP PTR36 is required for installation. Sold separately.

ITEMS INCLUDED IN THE BOX

1. 20″ or 50″ LED path light
2. Ground stake
3. 6″ T-connector
4. 6′ Extension cable

COMPATIBLE ACCESSORIES (SOLD SEPARATELY)

• DCP-TR60-BK: Transformer
• DCP-TR200-BK: Transformer
• DCP-PTR36: Plug-in driver
• DCP-ACC-MS12: Metal ground stake 12″
• DCP-ACC-MS06: 6″ metal stake
• DCP-ACC-MB: Mounting bracket
• DCP-EXT2OFT: 20′ extension cable
• DCP-EXT6FT: 6′ extension cable
• DCP-EXT-T: 6″ T-connector

WARRANTY

DALS offers a 5 year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1 877 430 1818 or send an e-mail to info@dals.com.

Installation guide

BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER. Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation should be done by a certified electrician.

1. Ensure that the power from the transformer is turned off.
   Concreete or deck installation
   Use the mouting bracket DCP-ACC-MB (sold separately) to install the fixture on concrete or wood.
   

2. Run the wire through the middle of the ground stake and attach the fixture to the ground stake by turning it until it is fully inserted.

3. Connect the fixture.

4. With your foot, insert the stake into the ground.

5. Turn power back on.

Dals Connect

To pair your product, follow the steps on the App

FCC COMPLIANCE

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply its for a Class B digtal device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• “Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the reosiver is connecter
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,

Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation

IC COMPLIANCE

CANICES-5()/NMB-5()
Industry Canada Notice

This device contains licence  compt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Det ‘slicence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED RF Exposure statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits,

Human proximity to the antenna shall not be less than 20cm (7.9 inches) during normal operation

1877 430 1818
www.dals.com
INS_DCP-STKXX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>