dals RGR2-CC 8 Watt Round LED Downlight Installation Guide
- June 3, 2024
- dals
Table of Contents
dals RGR2-CC 8 Watt Round LED Downlight
Installation
- Works with most dimmers. Refer to the DALS website for the dimmer compatibility list.
- Fonctionne avec la plupart des gradateurs. Voir le site web DALS pour la liste de gradateurs compatibles.
MODEL | LUMENS | WATTS | KELVIN | **DIMMABLE*** |
---|---|---|---|---|
RGR2-CC, RGR2SQ-CC | 600 lm | 8W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
RGR4-CC, RGR4SQ-CC | 1100 lm | 14W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
RGR6-CC, RGR6SQ-CC | 1600 lm | 20W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
ITEMS INCLUDED IN THE BOX
- 1x LED recessed light with CCT switch 1x Encastre DEL Avec interrupteur CCT
- 1x Junction box with integrated driver 1x Bôite de connexion avec transformateur intégré
SIDE VIEW OF INSTALLATION
WARRANTY / GARANTIE
DALS offers a warranty of 5 years from the date of purchase that covers repair or replacement of defective parts of the housing, optics, and electronics. To contact DALS customer service call to 1-877-430-1818 or send an e-mail to info@dals.com.
Installation guide
- BEFORE YOU START
- BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER.
- Instructions pertaining to a risk of fire, electric shock or injury to persons. Recessed downlight installation requires knowledge of luminaires electrical systems. Installation should be done by a certified electrician. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Suitable for wet Locations, Energy Star rated, IC-rated for direct contact with insulation and ETL certified listed compliant.
- This class B digital apparatus complies with Canadian ICES-005. This digital apparatus does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
INSTALLATION INSTRUCTIONS
Drill hole in ceiling and prepare supply wires. Install and unshield the line feed wire 6» (15 cm) and strip wires 5/8» (1.6 cm). Bring supply power to junction box through knockout.
- RGR2-CC / RGR2SQ-CC Ø2-3/4” (7 cm)
- RGR4-CC Ø4” (10 cm)
- RGR4SQ-CC
- Square: 4” x 4” (10 cm) or/ou
- Round: Ø4-1/4” (10.8 cm)
- RGR6-CC / RGR6SQ-CC Ø6-1/2” (16.5 cm)
Open the lid of the junction box. Use the wirenuts to match the white wire
from the line feed with the white wire of the junction box, to match the black
wire from the line feed with the black wire of the junction box and to match
the copper wire from the line feed and with the green wire of the junction
box.
Ouvrir le couvercle sur la boîte de connexion. Utiliser les marettes pour
jumeler le fil blanc du secteur avec le fil blanc de la boîte de jonction,
pour jumeler le fil noir du secteur avec le fil noir de la boîte de jonction
et pour jumeler le fil de cuivre du secteur avec le fil vert de la boîte de
jonction.
RGR2-CC / RGR2SQ-CC
Maximum of 3, #14 conductors i n the junction box.
RGR4-CC / RGR4SQ-CC RGR6-CC / RGR6SQ-CC
Maximum of 6, #14 conductors i n the junction box.
Route junction box through cut-out and connect recessed LED pannel to junction box with the quick connector.
Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.
- 1 877 430 1818
- www.dals.com
Documents / Resources
| dals
RGR2-CC 8 Watt Round LED
Downlight
[pdf] Installation Guide
RGR2-CC, RGR2SQ-CC, RGR4-CC, RGR4SQ-CC, RGR6-CC, RGR6SQ-CC, RGR2-CC 8 Watt
Round LED Downlight, RGR2-CC, 8 Watt Round LED Downlight, Round LED Downlight,
LED Downlight, Downlight
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>