ANKER GaNPrime 150W 747 Multi-Device Fast Charging Lineup User Manual
- June 4, 2024
- Anker
Table of Contents
ANKER GaNPrime 150W 747 Multi-Device Fast Charging Lineup
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Support
For FAQs and more in the formation, please visit: anker.com/support
- @anker_offcial
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Anker Innovations Limited
Hong Kong
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Germany
The following importer is the responsible party (contract for EU and UK
matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
United Kingdom
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom
Telephone: +1 (800) 988 79733
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help. The following importer is the responsible party (for FCC matters only)
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU declaration of conformity is available
at the following internet address: https://www.anker.com.
Hereby, Anker Innovations Limited declares that this product is in compliance
with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic
Compatibility Regulations 2016 & The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 &
The Ecodesign for Energy-Related Products Regulations 2010. The full text of
the GB declaration of conformity is available at the following internet
address: https://www.anker.com.
Recycle
- Indoor use only
- This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Specifications
Input
| 100-240V~2.3A 50-60Hz
---|---
Output
| Use One Port :
Use 1 Port Output
USB-C1(Top Type-C Port)
USB-C1/USB-C2 /USB-C3:
5V 3A /9V 3A /15V 3A /20V 5A(100W Max)
USB-A:
5V 3A /5V 4.5A /9V 2A/
12V 1.5A / 4.5V 5A (22.5W Max)
Use Two Ports :
USB-C1+USB-C2 : 150W Max USB-C2+USB-C3 : 150W Max USB-C1+USB-C3 : 150W Max
USB-C1+USB-A :5V 4.8A(24W Max) USB-C2/C3+USB-A: 100W+22.5W Max
Use Three Ports :
USB-C1+USB-C2+USB-C3: 150W Max
USB-C2+(USB-C1+USB-A):100W+24W Max USB-C3+(USB-C1+USB-A): 100W+24W Max USB-C2+USB-C3+USB-A:150W Max
Use Four Ports :150W Max Total Output: 150W Max
Average Active Efficiency
|
84.93%
---|---
Efficiency at Low Load (10%)
|
71.71%
No-Load Power Consumption
|
0.23W
Recommended Operating Temperature
| 0℃～ 25℃ /32 ℉ -77 ℉
Note: To ensure electrical safety and product performance, the
output power may fluctuate based on the ActiveShield™ 2.0 safety mechanism
when the ambient temperature is between 26-35℃ (78.8-95℉）with a high output
load.
ActiveShield™ 2.0 enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.
Warranty
Please note that your rights under applicable laws governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
- 24-month limited warranty*
Customer Service
- Lifetime technical support
- support@anker.com
- support.mea@anker.com (For the Middle East and Africa Only)
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>