MAYTAG W11556493C Top Loading Washing Machine User Guide
- June 9, 2024
- Maytag
Table of Contents
MAYTAG W11556493C Top Loading Washing Machine
OPERATING INSTRUCTIONS
WARNING
Fire Hazard
Never place items in the washer that are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it (including cooking
oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.
-
STEP 1. SORT & LOAD LAUNDRY
See Loading Recommendation section below. -
STEP 2. ADD HE DETERGENT & LAUNDRY PRODUCTS TO DISPENSERS*
Remove inside tray for powder HE detergent.
Follow manufacturer’s instructions to determine amount of laundry products to use.
-
STEP 3. PRESS POWER BUTTON TO TURN ON THE WASHER
-
**STEP 4. SELECT THE DESIRED CYCLE FOR YOUR LOAD***
-
STEP 5. ADJUST CYCLE SETTINGS, IF DESIRED
-
*STEP 6. SELECT ADDITIONAL OPTIONS
**
- **STEP 7. PRESS, HOLD, AND RELEASE HOLD TO START BUTTON TO BEGIN CYCLE
**
*NOTE: Not all cycles, settings or options are available with all models.
NOTE: Normal cycle is recommended for washing normally soiled cotton or
linen clothes. This clothes washer’s government energy certification was based
on the Normal cycle with all wash temperature selections and water fill levels
offered in the cycle. It was tested as a
User Adjustable Automatic Water Fill Control System clothes washer.
The settings as shipped are Normal cycle, Warm wash and Deep Fill OFF.
CONTROL PANEL AND FEATURES
Appearance may vary depending on model.
-
POWER
Press “POWER” button to turn on/off or to stop/cancel a cycle. -
CYCLE KNOB
Turn knob to select desired cycle. See “Cycle Guide” online for detailed cycle descriptions. -
HOLD TO START BUTTON
Press, hold, and release the “Hold to Start” button to start cycle.
Press during a cycle to pause cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid. -
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP
Press “Temp” button to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, Hot).
TAP COLD
Pressing the “Temp” button will toggle through available temperature options. When no lights in the temperature column are illuminated the selected temperature is “Tap Cold”.
RINSE OPTIONS
Press “Options” button to modify the cycle to add Fabric Softener and/or Extra Rinse.
FABRIC SOFTENER
Press “Options” button until LED next to Fabric Softener is illuminated to let the machine know when you have added fabric softener to the appropriate dispenser.
EXTRA RINSE
Press “Options” button until LED next to Extra Rinse is illuminated to add a deep rinse after your main rinse has completed. Available on most cycles. To run a “Rinse & Spin” cycle, select the “Drain & Spin” cycle and turn on “Extra Rinse” option.
WARNING: Do not wash water-resistant or water repellant-type clothing. Failure to closely follow these instructions may result in an abnormal vibrating and out-of balance condition that could result in physical injury, property damage, and/or appliance damage.
DEEP FILL
Press to add more water to the washer from the cycle’s auto sensed level (Auto, Medium, High).
AUTO OPTION
Pressing the “Deep Fill” button will toggle through available water level options. When no lights are in the column are illuminated the selected water level is “Auto”. Auto adjusts the water level for each load based on load size to provide efficient cleaning
TEMP
“Hot” option selected
When no lights in the temperature column are illuminated the selected
temperature is “Tap Cold”
DEEP FILL
“High” option selected
When no lights are in the column are illuminated the selected water level is “Auto”.
LOADING RECOMMENDATION
For best performance, it is recommended to load items by dropping them in loose heaps evenly around the washplate and agitator. Do not lay items length- wise around the washplate or agitator.
**MORE WATER WHEN YOU WANT IT
**
AUTO SENSING & DEEP FILL
- The washer will adjust the water level to the optimal amount for a High Efficiency wash of the detected load size.
- Press “Deep Fill” button to add more water to the wash load.
- There are three levels of deep water “Auto”, “Medium”, and “High”.
- Not all levels available on all cycles.
NOTE: If the washer detects an out-ofbalance condition it may pause and attempt to correct the situation. During this time the Sense and Rinse/Spin status indicators will both briefly illuminate
**CLEANING WITH LESS WATER
**
As the washer dampens and moves the load, the level of the items will settle
in the basket.
This is normal, and does not indicate that more items should be added.
IMPORTANT: You will not see a washer basket full of water as with your
past agitator-style washer. It is normal for some of the load to be above the
water line.
ONLINE ORDERING INFORMATION
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.
For information on any of the following items, the full cycle guide, warranty, detailed product dimensions, or for complete instructions for use and installation, please visit https://www.maytag.com/owners, or in Canada https://www.maytag.ca/owners. This may save you the cost of a service call.
-
REGISTER PRODUCT
-
MANUALS & DOWNLOADS
-
TROUBLESHOOTING & FAQ
-
REPLACEMENT PARTS
-
ADD SERVICE PLAN
-
SCHEDULE SERVICE
-
FILTERS
-
REBATE & PROMOS
However, if you need to contact us, use the information listed below for the appropriate region.
CUSTOMER SERVICE
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Canada:
1–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
``
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>