Logitech Z120 Stereo Speakers Quick Setup Guide

June 9, 2024
Logitech

Logitech Z120 Stereo Speakers

Logitech-Z120-Stereo-Speakers-product

What’s in the box?

MP3 setup To play music from an MP3 player or iPod, plug the USB cable into your computer and plug the 3.5 mm audio connector into your MP3 player.

Logitech-Z120-Stereo-Speakers-fig-2

Help with setup

Does something not sound right? and No sound at all?

  • Increase the volume setting on the right speaker by rotating the power/volume control knob clockwise.
  • Is the power light on? Make sure the speakers are plugged into your computer’s USB port and the power light is on. You may also unplug the USB cable and plug it in again.
  • If you’re using a USB hub (powered or un-powered), try plugging the USB cable directly into your computer.
  • Check the 3.5 mm audio cable connection. It must be plugged into an audio output jack on your computer or other audio sources.
  • Adjust the volume set to an audible level in both your application and operating system.
  • Quit and restart your media application.
  • Try using the speakers with another computer.

Logitech-Z120-Stereo-Speakers-fig-3

User Support

United States +1 646-454-3200
Argentina +00800-555-3284
Brazil +0 800-891-4173
Canada +1 866-934-5644
Chile 1230 020 5484
Latin America +1 800-578-9619
Mexico 001 800 578 9619

Copyrights

© 2011 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Mac and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice 621-000051.002.

FAQ’s

How long is Logitech Z120 cable?

The cable is 3.5 feet long.

How can I link my laptop to my Logitech Z120 speakers?

The Logitech Z120 Stereo Speakers may be connected by 3.5mm for audio and are powered by a USB port. And because it has a 3.5mm interface, you can use it with just much anything that has a 3.5mm connection in addition to your computer and laptop, including smartphones, tablets, and other multimedia devices.

How tall is Logitech z120?

The item weighs 671 g and has measurements of 40 x 12.9 x 15 cm.

Are Logitech sound systems good?

The majority of reviews for Logitech speakers are good. With over 1,000 customer reviews and an average rating of 4.5 stars, they are also one of the most popular brands for computer speakers on Amazon. The majority of people claim that they sound nice and are excellent value for the money.

What does tone on speakers from Logitech do?

Users using tone control can customize the sound to their preferences. Also, it gives them the ability to make up for flaws in the playback equipment, hearing impairments, room acoustics, or recording quality.

The ohms of Logitech speakers are what?

Full Range Speaker Pair by Logitech 2″ 2 Ohms 3-5 Watts Shielded.

Do speakers from Logitech require a driver?

Yes, a driver update for the Logitech speaker is necessary for realistic sound.

Do my Logitech speakers require an amplifier?

The audio signal that comes out of the source, such as your computer or phone, is not nearly powerful enough to actually move the components in a speaker to make the sound, thus technically speaking all speakers (and even some headphones) need an amplifier.

My Logitech speakers won’t sync. What do I do?

Hold the Volume Up and Volume Down buttons on the back of your wireless speaker in place while playing music for 10 seconds. The wireless connection Indicator in green will start to rapidly blink.

Where should my Logitech speakers be plugged in?

When using a 3.5 mm mini jack to connect speakers or headphones, the wire must be connected to a wall outlet or surge protector outlet. Connect the tiny plug to the audio line-level output on the computer’s back. As shown in the photo, the port is often lime green.

How can I tell whether the battery on my Logitech speaker is full?

By turning on the speaker and simultaneously pressing the + and – buttons on the front, you can also check the speaker’s battery life while you’re on the go. Three tones will indicate that the speaker is fully charged, two tones will indicate that it is about halfway charged, and a descending tone will indicate that you need to charge the speaker.

How can I tell when my Logitech speaker is fully charged?

A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished. A completely charged battery may be charged from empty in roughly 4 hours.

What is the best Logitech speaker?

The Logitech Z906 5.1 Surround Sound Speaker System is the best overall. One of the top surround sound speakers from Logitech that provides 5.1 digital surround sound is the Z906. These speakers feature a 165-watt subwoofer for reproducing deep bass and are compatible with Dolby Digital and DTS soundtracks.

Can you get surround sound via Logitech?

The Logitech Z120 provides real surround sound out of the box. This THX- certified 5.1 speaker system is tuned to the highest standards and is designed to decode Dolby Digital and DTS-encoded soundtracks to give you a superior audio experience.

Download this PDF Link:Logitech Z120 Stereo Speakers Quick Setup Guide

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals