SAVEWO TGP-X1C Intelligent Air Disinfection and Purification Machine User Manual

A.I. SANITIZING AIR PURIFIER

TGP-X1C

Please read through this user manual before using the product and keep the manual for future reference

User Manual

Safety Notice

In order to avoid causing harm to you and others, please read the following safety precautions:

• You must use the appropriate power socket to ensure reliable grounding. If it is found that the plug is inconsistent with your socket, pls call the professional electrician to install the appropriate socket for you. Please do not modify the plug itself in any way.
• The air purifier adopts 220V/50Hz AC power supply. If the voltage fluctuation range is large (over 187-242V norm), it may danger.
• If the power cord is damaged or the plug is damaged, do not use it. Please go to the designated repair location of the manufacturer to replace it.
• Don’t pull out the plug by pulling the power cord. The correct step is to grip the plug and pull it out from the socket.
• If it is not used for a long time, plugs must be pulled out to avoid electric shock or other accidents.
• The plug should be kept firmly in contact with socket in order to avoid fire.
• When removing the machine from the wall, be careful not to damage the machine or the power cord.
• If gas leaks, do not pull out the power plug of the machine.
• When cleaning machine, please remove the power to avoid electric shock.
• No items are allowed to be place on the top of the machine to prevent blocking the air vents.

Product and accessories

A.I. Sanitizing Air Purifier

Filter

1. Washable Pre-Filter
2. Modified Activated Carbon Honey Filter
3. HEPA Filter

Power cord

User manual

Product Accessories Presentation

1. Air Quality Indicator
2. Front housing
3. Handle
4. Sensor door cover
5. Power cord socket

1. Magnet
2. Motor Braket
3. HEPA Filter
4. Modified Activated Carbon Honey Filter
5. Washable Pre-Filter
6. Front housing

Usage guidance

1. Dispatch package                          2. Remove front housing

3. Remove the plastic bag             4. Install HEPA filter

5. Install Modified Activated Carbon Honey Filter    6. Install Washable Pre- Filter

7. Install front housing                         8. Connect power to purifier

9. Press power button to turn on the purifier

Warning

In order to prevent the occurrence of hazards or damage to property, please read the following provisions and instructions.

 The content of this sign is: assuming that there is a possibility of death or serious injury.

The content of this sign is: cannot do anything prohibited.

The content of this sign is: the possibility of injury or material damage.

The content is: must adhere to compulsory content.

Warning

Prohibit Disassembling.
Not professional maintenance personnel are prohibited to disassemble and reform, in order to avoid damage or harm.

Regulatly check the plug of the power cord.
Dust on plug will cause poor insulation due to dampness. Pull out the power plug regularly. wipe it with dry cloth, pull it out if not in use.

Prohibiting the use of other AC power sources.
It might damage or harm to the products.

It is forbidden to use damaged plugs and loose sockets.
Or it may cause fire

It is forbidden to use in kitchen or other environment with lampblack
Otherwise, it will cause machine damage, also cannot be used as extractor fan.

When Cleaning, Make sure has been pulled out the plug.
Or it may cause injury or electric shock.

Prohibiting wet hands from touching power plugs.
It lead to electric shock.

Prohibiting product contamination.
Or it may cause short circuit and electric shock.

Notice items

It is forbidden to use in bathroom or other high hamidity environment.
Otherwise it will easily cause electricity leakage, electric shock, fire and other hazards.

It is forbidden to use pesticide spray when the machine is running.
After using pesticide spray, let indoor air circulate sufficiently first. Otherwise, it will accumulate pesticide ingredients inside the machine, which is harmful to human health.

It is forbidden to wipe with alcohol or organic solvent.
Otherwise it will damage the product or cause electric shock, fire, etc.

Do not contact with flammable substances or sources of fire,etc.

It is forbidden to use in kitchen or other environment with lampblack.
Otherwise, it will machine damage, also can not be used as extractor fan.

When using with the burner at the same time, pay attention to the ventilation.
Machine can not filter out carbon monoxide, otherwise it will lead to poisoning.

please unplug the power supply by holding the plug
Otherwise it will damage the power cord, or cause fire, shock and other dangers due to short circuit.

Close the doors and windows in order to purify the air effectively and quickly.

Notice

If any of the following situations occur, immediately unplug the power supply.

• If any switch does not work.
• If the power supply is short-circuit.
• If the power cord or plug is abnormally hot.
• If there is burning odor or abnormal sound and vibration.
• If there are other abnormal phenomena or faults.

if the power cord is damaged, in order to avoid danger, it must be replaced by professionals of the manufacturer, its maintenance department or similar departments.

Manipulation Presentation

Turn On

Press the main switch key.
After the host is started, the display content is as follows.

Automatic purification

Press the “automatic key” to enter the automatic purification mode.
The air volume is automatically adjusted with PM2.5.
The corresponding relation is as follows.

PM2.5

| AIR QUALITY GRADE| AIR QUALITY COLOR| AIR CAPACITY GRADE
---|---|---|---
10-79| Excellent| Green|

1

80-149

| Good| Blue| 2
150-199|

3

200-249

| Medium| Purple| 4
250-299|

5

300-500

| Bad| Red|

6

Sleep mode

Touch button screen “Sleep” key to enter the sleep mode, any key can wake up the sleep mode, and to touch any key can cancel the sleep mode.

Timer

1. Setting the working time of the purifier, 1H-12H, turn off the machine.
2. Press this button for 3 seconds long to check the cumulative working time of the filter. Clear the accumulative working time of the filter.

Child lock function

1. Touch the “Child lock” button of the button screen, child lock function started, and press 5 seconds long to close the child lock function.
2. Press this button for 5 seconds in the non-child lock state to check the cumulative working time of the filter. The cumulative working time of the filter screen is displayed in the PM2.5 digital area.

Start ionizer function

1. The negative ion function star by pressing the “Ionizer” button.

Air volume regulation

Touch the button “Speed”, adjust the air volume artificially, and cycle to select 1-5 setting. Automatic mode can be removed, manual mode can be entered, and the selection of fastest speed can be cleared.

The fastest speed mode

Touch button screen ‘Fastest” key on screen, adjust the air volume to the maximum (6 setting running), can cancel the automatic mode, then enter the manual mode, and clear the air volume selection.

Enable the ultraviolet lamp purification function

1. Turn on/off the ultraviolet lamp function by touching the “Sterilize” key of the button screen.
2. When the indicator of screen replacement is on, press the sterilization button for 3 seconds to clear the accumulative working time of the screen.

Screen Replacement

Tips for Screen Replacement
Filter When the filter screen indicator lights up, the filter screen needs to be replaced.
If you need to check the cumulative working time of the filter, you can press the child lock key for 5 seconds long in the non-child lock state. The cumulative working time of the filter is displayed in the PM2.5 digital area, running display when four digits are displayed.

Filter installation

1. Composite HEFA Filter
2. Composite Modified Activated Carbon Honey Filter
3. Composite Pre-Filter

Replacement steps of filter:

1.Open front housing                     2.Install HEPA filter

3.Install Modified Activated Carbon Honey Filter and Pre-filter

4.Install front housing to complete the change of mesh

After replacing the filter, long press the “Sterilize” key and extinguish the indicator

APP Download and Connection

SAVEWO
APPLE Store/ PLAY Store available
Get and install the APP
*App updates may cause differences in the contents of the manual Please update the latest version

Android Device                             iOS Device

Tap “Install Download APP        Tap ” GET ” Download APP

APP Connection

1. Open APP                     2. Tap “Sign Up”

3. Input email address, Tap “Get verification code”

4. Enter verification code and set a password

5. Tap “Add Device”                      6. Tap “Air Purifier”

7. Input “WIFI Name” and “Password”

8. Press “ionizer” button for 5 seconds until the wifi icon is flashing open mode

9. Connecting                       10. Device add successfully

11. Tap “Air purifier”            12. APP User Interface

APP Control permissions

Note: multiple users can control one purifier at the same time,or one user can control multiple air purifiers.

1. Tap “icon” in the upper right corner.     2. Tap “Share Device”

3. Tap “Add Sharing”                    4. Choose to share your SAVEWO account

5. Enter the user account and Tap “Done”

6. Successful sharing, only authorized users can control this device

Five stages to freshen the air

First stage
Particle primary filter
Effectively filter out large particles such as hair and pet dander and replace it every month to ensure the cleanliness and efficiency of other filters.

Second stage
Modified Activated Nano-Carbon Crystal Filter
A beehive grid design with a thickness of up to 10mm and containing 500g of modified activated nano-carbon crystals can effectively filter VOCs (volatile organic compounds), and harmful chemical gases such as toluene, formaldehyde, ammonia etc.

Third stage
HEPA H13 grade particulate filter
The HEPA H13 filter layer with a thickness of 28mm can filter up to 99.97% suspended particles as small as 0.01 microns, including PM2.5, dust, smoke, pollen, dust mites, mold spores, animal dander, bacteria, viruses and other pollutants.

Fourth stage
Ultraviolet C Light sterilization
The machine is equipped with 12V 253.7nm UVC LED, which uses UVC light to sterilize. The sterilization rate upto 99.9%, which can quickly sterilizes bacteria, viruses, and spores etc.

Fifth stage
Negative air ion generator
30 million negative air ions are continuously produced every second, completely removing the remaining ultra-small particles and harmful substances, effectively neutralizing the positive ions, reducing the harm of excessive active oxygen to the human body, and freshening the air.

Technical Parameters

Product name

| A.I. Sanitizing Air Purifier
---|---

Size

| 390x230x625mm

Installation Method

| Floor Standing

Machine Weight

| 8.6kg

Voltage Frequency

| 220V/50Hz

Power

| 73 W

Speed

| 6 settings

Particle CADR

| 450m²/h

Applicable Area

| 30m²@6ach 60m²@3ach (2.5m height indoor)

Particle Cleaning Efficiency

| HEPA H13

Purifying Method

| Physical filter purification, ultraviolet light and negative ions purification

Main Material

| ABS

Environmental Conditions

| Temperature: 20-60 °C
Relative Humidity: 10-85% Non-corrosive Gas Indoor Environment

Noise

| ≤65db

Cleaning

In order to maintain the best working state of the machine, It is necessary to clean the machine regularly.

1.Body cleaning
Clean the main machine and the dirt of the inlet and outlet irregularly, to ensure the smooth ventilation of the outlet. For stubborn dirt, use a soft and dry cloth to wipe. Do not get wet. Do not use detergents, gasoline, diluents and other volatile substances.

2. Nano-high-efficiency filters maintaining.
Up to the place and operation time, replace the nano-high-efficiency filters periodically. Do not wash it with water then use directly.
Open the tuner baffle according to the ‘maintenance cycle’ and take out the nano-high-efficiency filters to replace with a new filter. After replacement, put the baffles back in place.

3. If you do not use the nano-high-efficiency filters for a long time
Please turn off the machine first, unplug the power cord, and wrap the power cord.
Clean all parts, air inlet and outlet and main body.
Put the nano high-efficiency filter in a suitable plastic bag and seal the bag mouth, and put it in the machine.
Put the dust plug on the cover of the main unit or put it in the packing box and put it in a cool place.

Maintenance

Host: Please wipe the surface of the machine regularly with a wet and soft cloth with clean water containing detergent, and clean the inlet and outlet with a brush.

Sensor cleaning: Clean the lens and sensor surface with a wet cotton swab regularly, and clean the residual water stain on the sensor with a dry cotton swab.

Filter: Built-in program will remind for filter replacement, each layer of the filter can be used for about 1-3 months, if the environment pollution is very serious, filter needs to be replaced in advance. The filter can be got from the designated distributor.

Filter cleaning: The air purifier needs to clean and maintain its filter regularly to make the best use.

sunlight for 2 months to 3 hours
HEPA Filter| Used period about 3 months| Can be only cleaned by vacuum cleaner

The built-in program reminds that the filter needs to be replaced, and the filter can be purchased at a designated dealer.

Malfunction checking

When the following happens, please confirm the following items before repairing.

1. Whether the power cord is disconnected from the socket.
2. Whether the power cord is detached from the purifier. 
3. Whether the front panel is covered properly?

During running, the air quality indicator always shows a high value of ‘purple’ or PM2.5 is always very high.|

1. Sensors may be affected by water vapor, soot, spray and so on. Move the fuselage to another clean environment for testing.
2. Remove the sensor cover and wipe the sensor lens with a clean soft cloth.

Odor is difficult to eliminate.| Check whether the filters has failed or the odor is released by adsorbing pollutants.
Particle in air is hard to eliminate, noise get bigger during operation.| Check whether the HEPA filter has failed, and clean the HEPA filter and pre filter with a vacuum cleaner.
If not improved, please replace it with a new HEPA filter.
Indoor air is polluted, but the air purifier has no reaction.| The position of the machine may be unreasonable, which makes it difficult for the machine to inhale air pollutants.
Change the placement of the machine, or choose manual operation mode, and adjust the wind speed to fastest setting.

Warranty Terms & Conditions

Important notes:

• This Product Warranty Service is only applicable to products purchased on Hong Kong Savewo Website or authorized dealers.
• Customer is required to present the official purchase invoice issued by Savewo Distribution Limited or the authorized dealers to our technician for verification when service is required, otherwise repair service will be on chargeable basis. (Please refer to Terms and Conditions for details).
• For details of Terms and Conditions, please refer to the website of Savewo: https://www.savewo.com/warranty
• In the case of any disputes, Savewo reserves the right of final decision.

Terms and Conditions

SAVEWO Distribution Limited ( “The Company” ) offers 12 months warranty service for the product from the date of purchase. Repair and maintenance of the product beyond the stated warranty period will be charged.

1. The Company shall not be liable for any direct or indirect loss or damage to any person or property, howsoever caused arising from improper use, or any stoppage, breakdown or failure of the product.

2. Customer is responsible for delivering the product to our service centres or designated locations, and to pick up the repaired product from the same location when warranty service is required.

3. Warranty service is valid only in Hong Kong. Customer is required to present the official purchase invoice issued by the company or the dealers of Hong Kong to our technician for verification when service is rendered

4. The company will offer customers maintenance service for free under normal use for the applicable period (excluding any surface, cabinet, consumptive parts, accessories and consumables).

5. Warranty service does not cover the following items. Additional charges shall be levied if services are required.
   (a) The product has been explicitly or implicitly modified, tampered with, altered or repaired in any way by non-authorized person.
   (b) The product has been damaged through misuse, negligence, neglect of care after use, power interruption or abnormal voltage input, accident, natural calamities, or due to ingress of insects, foreign matter or liquid, corrosion, normal wear and tear or external factors.
   (c) The product has been damaged due to use contrary to that indicated in the instruction manual.

6. If there is any change in all information, the online version shall prevail without prior notice. In case of any dispute,The company reserves the right of final decision.

Before operating the appliance, please read this manual and all the safety instructions thoroughly and Keep it for future reference.
Remark: Product appearance and/or specifications are subject to change without notice. Please refer to the updated version later if applicable.

SAVEWO
APPLE Store/ PLAY Store available
Get and install the APP

  www.savewo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>