ELITE SCREENS RM-10×20-IPW360-F ImpactWhite 360 Designer Cut Golf Impact Projection Screen User Manual
- June 9, 2024
- ELITE SCREENS
Table of Contents
ELITE SCREENS RM-10×20-IPW360-F ImpactWhite 360 Designer Cut Golf Impact
Projection Screen
Care & Use
Elite Screens wants you to enjoy your Designer Cut Golf Impact Projection Screen to its full extent and for many years to come! We made the Designer Cut materials available for you to be able to fully customize your projection experience, however, please note that ALL Designer Cut materials do require specific properties to be adhered during installation to obtain an enjoyable viewing experience. The GolfSim Designer Cut is a pre-cut ImpactWhite™ 360 golf screen material. ImpactWhite™ 360 is a single-layer tightly weaved fabric designed to provide exceptional projection imaging characteristics with the ability to also perform as a Golf Impact or Multi-Sport Simulation Screen.
ImpactWhite™ 360 Designer Cut Specifications
Model Number| RM-10×20-IPW360-F
Color| White
Thickness| 1.2 mm
Material composition| 100% Polyester
Weight| 360 g /m2
Height x Width| 10 ft (3048 mm) x 20 ft (6096 mm)
Gain| 1.0
Viewing Angle| 180°
Installation Tips and Precautions
- Make sure to use the correct side. The ImpacWhite™ 360 screen should have a front and back label.
- Folding lines/wrinkles are normal due to packaging.
- Wear gloves and unroll the material on a clean surface.
- Handle with caution, material is subject to static electricity.
- Make sure to allow proper distance for swing range to protect children, pets, ceilings, walls, windows, or any other property.
- Avoid using golf balls with scuffs or markings to maximize the life of your ImpacWhite™ 360 screen. If possible, use new golf balls.
- Never place the screen over a window or under constant sun exposure. Solar radiation from direct sunlight destroys the synthetic fibers of the screen.
Maintenance
- Use a soft bristle brush or dry microfiber cloth to remove dust from the screen surface.
- When cleaning, use a microfiber cloth dampened with warm water to remove any traces.
- Use a fabric steamer to remove any wrinkles or folds in the material.
- Do NOT rub or apply pressure when cleaning the surface.
- Do NOT use any solutions, chemicals, or abrasive cleaners onto the screen surface.
- DO NOT touch the screen directly with your fingers, pens/pencils or any other sharp or abrasive objects.
We take great care in packaging the Designer Cut series of materials so that they arrive at your doorstep with zero issues. Should your screen arrive with any shipping damage or show signs of damage, we urge you to contact us directly so that we can provide a speedy resolution – we always strive for the best customer experience and are here to help.
For Technical Support or an Elite Screens contact in your area, visit www.elitecreens.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>