TooQ TQCD02W Charger Stand User Manual
- June 9, 2024
- TooQ
Table of Contents
TooQ TQCD02W Charger Stand
Introduction
The charger stand 2 in 1 allows the simultaneous charging for your Apple Watch
and phone.
For your safety and the good use of the product, please read the entire instruction manual before you start the installation.
Package content
- 1 x Charger stand 2 in 1.
- 1 x Supply adapter.
- 1 x Installation manual.
TQCD02W specifications
- Magnetic wireless charging module for Apple Watch.
- It supports QI wireless charging with maximum output of 10W.
- It can be used to charge 2 devices at the same time. 5W for Apple Watch and 10 W for wireless charging of the phone.
- Made of aluminum.
TQCD02L specifications
- Magnetic wireless charging module for Apple Watch.
- Quick charge with C94 Lightning for iPhone.
- It can be used to charge 2 devices at the same time. 5W for Apple Watch and 18 W for iPhone.
- Made of aluminum.
TQCD02W details
-
Wireless charging area.
-
Magnetic charging module for Apple Watch.
-
Charging indicator:
Green light: Indicates that the stand is connected.
Red light: Indicates that the stand is charging the devices.
Blue light: The device is completely charged.
Red and intermittent blue light: Error. -
Type – C port to connect the stand (12V/1.5A).
TQCD02L details
- C94 Lightning Connector for iPhone.
- Magnetic wireless charging module for Apple Watch.
- Type – C port to connect the stand (20V/1.5A).
Use of the charging stand
- Connect the power adapter.
- Position the phone, the Apple Watch or both.
- Make sure that the device starts to charge.
If it does not start, check that it is correctly emplaced.
Recommendations
- Clean the stand with a fiber rag, avoid the use of alcohol or other liquid.
- Avoid high temperatures, direct sunlight’s, humidity caused by the environment, water and dust.
Warranty information
Too offers 36 month of warranty from the moment of the acquisition. Because of this, you must keep the ticket or the invoice, where the date of acquisition is mentioned. The distributor will attend your request and will solve the incidents while the warranty is vigor. The product shall show the series number. If this is not readable, the warranty will not be applied.
Out of warranty
Warranty does not cover damages:
- If the instructions indicated in the user guide are not been followed.
- Due to any equipment modification or alteration.
- Extreme temperatures, moisture or liquid contact.
- Due to scratches caused by daily use.
FAQ
Common questions and their answers are available in our webpage www.tooq.com.
Some products can have some variations due to lack of stock, product improvement or printing error. If you have any doubt, please contact us.