dals GMB2-CC-BK LED Gimbal Light Installation Guide

June 9, 2024
dals

GMB2-CC-BK LED Gimbal Light
Installation Guide
GMB2-XX

GMB4-XXdals GMB2-CC-BK LED Gimbal Light - icon 1

GMB2-CC-BK LED Gimbal Light

MODEL LUMENS WATTS COLOR TEMPERATURE DIMMABLE
GMB2-CC-XX 6 2 5  l m 8W 2700K, 3000K, 3500K, 4000K, 5000K
GMB4-CC-XX 810 lm 11W 2700K, 3000K, 3500K, 4000K, 5000K

*Works with most dimmers. Refer to DALS website for dimmer compatibility list.

ITEMS INCLUDED IN THE BOX

dals GMB2-CC-BK LED Gimbal Light - fig 1

  1. 1x LED gimbal light with CCT switch
  2. 1x Junction box with integrated driver

SIDE VIEW OF INSTALLATION

dals GMB2-CC-BK LED Gimbal Light - fig 2 WARRANTY
DALS offers a warranty of 5 years from the date of purchase that covers repair or replacement of defective parts of the housing, optics, and electronics.
To contact DALS customer service call to 1-877-430-1818 or send an e-mail to info@dals.com.

Installation guide

GMB2-CC-XX
GMB4-CC-XX
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation should be done by a certified electrician.
This class B digital apparatus complies with Canadian ICES-005. This digital apparatus does not exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

INSTALLATION INSTRUCTIONS

  1. Drill hole in ceiling and prepare supply wires. Install and unshield the line feed wire 6″ (15 cm) and strip wires 5/8″ (1.6 cm). Bring supply power to junction box through knockout.dals GMB2-CC-BK LED Gimbal Light - fig 3

  2. Open the lid of the junction box. Use the quick connectors to pair the wires from the main line to the wires from the junction box.
    GMB2-CC-XX
    Maximum of 3, #14 conductors in the junction box.

  3. Route junction box through cut-out and connect recessed LED pannel to junction box with the quick connector.
    dals GMB2-CC-BK LED Gimbal Light - fig 4 **** Don’t forget to select the color temperature you would like.

  4. Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.

18774301818
www.dals.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals