HENDI 230602 Blender with Noise Cover User Manual

HENDI 230602 Blender with Noise Cover

Dear Customer,
Thank you for purchasing this Hendi appliance. Read this user manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Read user manual and keep this with the appliance.
For indoor use only.

NOTE: This manual is translated from original English manual using AI and machine translations.

Technical specifications

** Maximum : 24,800 +/- 10%

I| * Tritan| ** PC
J| 252x258x(H)547 mm/мм
K| 9 kg / кг

• A: Item no.
• B: Rated voltage and frequency
• C: Rated input power
• D: Protection class
• E: Waterproof protection rating
• F: Noise level (approx. dB(A))
• G: Maximum capacity
• H: Rotation speed without loading (rpm)
  • Minimum
  • Maximum
• I: :Jar material
  • Tritan
  • PC
• J: Dimensions
• K: Net weight

Remark: Technical specification is subjected to change without prior notification.

Safety instructions

• Only use the appliance for the intended purpose it was designed for, as described in this manual.

• The manufacturer is not liable for any damage caused by incorrect operation and improper use.

• DANGER! RISK OF ELECTRIC SHOCK! Do not attempt to repair the appliance by yourself. Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.

• NEVER USE A DAMAGED APPLIANCE! Check the electrical connections and cord regularly for any damage. When damaged, disconnect the appliance from the power supply. Any repairs should only be carried out by a supplier or qualified person to avoid danger or injury.

• WARNING! When positioning the appliance, route the power cable safely if necessary to avoid unintentional pulling, being damaged, coming into contact with the heating surface, or causing a tripping hazard.

• WARNING! As long as the plug is in the socket the appliance is connected to the power supply.

• WARNING! ALWAYS switch off the appliance before disconnecting from the power supply, cleaning, maintenance or storage.

• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.

• Do not touch the plug/electrical connections with wet or damp hands.

• Keep the appliance and electrical plug/connections away from water and other liquids. If the appliance falls into water,remove the power supply connections immediately. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life threatening risks.

• Connect the power supply into an easily accessible electrical outlet so you can disconnect the appliance immediately in case of emergency.

• Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.

• Never carry the appliance by its cord.

• Never try to open the housing of the appliance yourself.

• Do not insert objects into the housing of the appliance.

• Never leave the appliance unattended during use.

• This appliance should be operated by trained personnel in kitchen of the restaurant, canteens or bar staff, etc.

• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.

• This appliance should, under any circumstances, not be used by children.

• Keep the appliance and its electrical connections out of reach of children.

• Never use accessories or any extra devices other than those supplied with the appliance or recommended by the manufacturer.
  Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.

• Do not operate this appliance by means of an external timer or remote-control system.

• Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.).

• Do not cover the appliance in operation.

• Do not place any objects on top of the appliance.

• Do not use the appliance near any open flames, explosive or flammable materials. Always operate the appliance on a horizontal, stable, clean, heat-resistant and dry surface.

• The appliance is not suitable for installation in an area where a water jet could be used.

• Leave a space of at least 20 cm around the appliance for ventilation during use.

• WARNING! Keep all ventilation openings on the appliance free from obstruction.

Special safety instructions

• This appliance is intended for commercial use.

• WARNING! Take great care when handling the cutting disks.
  Wear protective gloves (not supplied) if necessary.

• WARNING! BLADES ARE SHARP. KEEP HANDS AWAY!

• Do not operate the appliance without load to prevent overheating.

• CAUTION! ALWAYS switch the machine off and disconnect the power supply before touching any motoring parts.

• WARNING! Do not attempt to by-pass the safety interlock.
  The appliance is equipped with a safety interlock to prevent the end user from touching the moving parts.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. (Fixed supply cord inside, but it could be replaced)

• WARNING! ALWAYS keep hands, long hair and clothing away from the moving parts.

• This appliance should not be used for cutting frozen food, bone-in meat or fish, etc.

• Do not load too much ingredients in order to prevent overflow of the food products.

• WARNING! During operation, keep hands and utensils out of the container to reduce the risk of severe personal injury and / or damage to the blender.

Intended use

• This appliance is intended to be used for commercial applications, for example in kitchens of restaurants, canteens, hospital and in commercial enterprises such as bakeries, butcheries, etc., but not for continuous mass production of food.
• The appliance is designed for blending and mixing food. Any other use may lead to damage to the appliance or personal injury.
• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation
This appliance is classified as protection class I and must be connected to a protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is fitted with a power cord with grounding plug or electrical connections with grounding wire. The connections must be properly installed and grounded.

Main parts of the product

Fig.1 on page 3)

1. Power switch (0 / I)
2. Speed dial (clockwise, Low to Hight)
3. Pulse button
4. Bottom of the motor base unit
5. Motor unit
6. Blade assembly
7. Jug set
8. Jug lid
9. Cover cap
10. Protective cover
    Remark: The content of this manual applies for all listed items unless specified otherwise. The appearance may vary from the shown illustrations.

Circuit diagram

(Fig.2 on page 3)

• L1 & L2: Magnetic ring
• MS1: Micro switch
• MS2: Magnetic safety micro switch
• PCB: Main PCB
• S: Power switch
• R: Variable resistor
• P: Pulse button
• M: Motor

Exploded diagram with part list
(Fig.3 on page 4)

Preparation before use

• Remove all protective packaging and wrapping.

• Check that the device is in good condition and with all accessories.
  In case of incomplete or damaged delivery, please contact the supplier immediately. In this case, do not use the device.

• Clean the accessories and the appliance before use (See ==> Cleaning & Maintenance).

• Make sure the appliance is completely dry.

• Place the appliance on a horizontal, stable and heat-resistant surface that is safe against water splashes.

• Keep the packaging if you intend to store your appliance in the future.

• Keep the user manual for future reference.

NOTE! Due to manufacturing residues, the appliance may emit a light odor during the first few uses. This is normal and does not indicate any defect or hazard. Make sure the appliance is well ventilated.

Installation

• Read this manual thoroughly and carefully before installation and operation.

• Ensure the machine is placed in a dry area and that the surface has sufficient strength to support the appliance.
  Also ensure that there are no obstructions nearby during operation of the appliance.

• Ensure that the electrical power supply corresponds with the rating label on the machine.

CAUTION! Never bypass any safety micro switch.

Operating instructions

Note: For safety reason, the appliance can only start to operate with the jug set (6) installed properly on the motor unit (5) and when the protective cover (10) is closed properly.

• Check if the power switch (1) is at the “0” position and turn the speed dial (2) to “Low” position.

• Unplug the machine and open the protective cover (10), take out the jug set (7) from the motor unit (5).

• Pour all the ingredients into the jug (7) and close the lid (8) and place the cover cap (9) correctly in place.
  Place the whole jug set (7) onto the motor unit (5) & close the protective cover (10).

• Connect the power plug to a suitable electrical power supply socket.

• Switch ON the machine by pressing the power switch (1) to “I” position & select a suitable speed by turning the speed dial (2).

Pulse function (0 / II)

| For ice crushing or short, power impulse movements. Note: Use the pulse func- tion for 1 ~ 2 seconds each time. Repeated about several times if necessary.

After use, always turn the power switch (1) to “0” position and disconnect the plug from the electrical socket.

Remarks:

1. For the best results when blending solid foodstuffs, only add small portions in succession, not all ingredients at the same time.

2. Always start with lower speed. If necessary, then switch to the higher speed or to the “Pulse” function, so as not to jam the blade assembly (6).

3. Do not use this machine to blend hard foodstuff, such as nuts.

4. Do not fill liquids above the MAX. mark of the jug (7).

5. Liquids to be blend should be at or below room temperature.
   If you are going to blend warm liquids, ensure that the jug lid (8) is correctly in place and use low speed for processing. Risk of burns and be careful.

6. Avoid long period of operation due to the loud noise that may hurt the hearing.

Special safety features

IMPORTANT: This machine has a specially designed safety feature: Protective cover (10).
The machine can only operate when the protective cover (10) is closed and the jug (7) is installed properly on the motor unit (5).

Cleaning & maintenance

• ATTENTION! Always disconnect the appliance from the power supply and cool down before storage, cleaning & maintenance.
• Do not use water jet or steam cleaner for cleaning and do not push the appliance under the water as the parts will get wet and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this can adversely affect the life of the appliance and result in a dangerous situation.
• Food residues should be regularly cleaned and removed from the appliance. If the appliance is not cleaned properly,it will reduce its lifespan and may result in a dangerous condition during use.
• DANGER OF INJURY! Care should be taken when handling the sharp cutting blades during cleaning.

Cleaning

• Clean the cooled exterior surface with a cloth or sponge slightly dampened with a mild soap solution.

• For reasons of hygiene, the appliance should be cleaned before and after use.

• Avoid water contacting the electrical components.

• Never immerse the appliance in water or other liquids.

• Never use aggressive cleaning agents, abrasive sponges, or cleaning agents containing chlorine. Do not use steel wool,metallic utensils, or any sharp or pointed objects for cleaning.
  Do not use petrol or solvents!

• No parts are dishwasher safe.

Maintenance

• Check the operation of the appliance regularly to prevent serious accidents.
• If you see that the appliance is not working properly or that there is a problem, stop using it, switch it off and contact the supplier.
• All maintenance, installation and repair work must be carried out by specialised and authorised technicians, or recommended by the manufacturer.

Transportation and Storage

• Before storage, always make sure that the appliance has been disconnected from the power supply and completely cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could damage it.
• Do not move the appliance while it is under operation. Disconnect the appliance from power supply when moving and hold it at the bottom.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

Machine does not start running

| Protective cov- er (10) is not in properly closed position.| Check to make sure the protec- tive cover (10) is closed properly.
Jug (7) is not placed properly.| Check to make sure the jug set (7) properly.
Power switch (1) is not pressed| Press the power switch (1)

Machine               stops during operation

|

Built-in overload- ing safety acti- vated.

| –  Switch OFF the machine by

pressing the switch (1) to “0” position and unplug the ma- chine.

–  Leaving the ma- chine for cooling down for about

30 minutes and then start again.

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).
In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste for recycling, please contact your local waste collection company.
The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

Hendi B.V.
Innovatielaan 6
6745 XW De Klomp, The Netherlands
Tel: +31 317 681 040
Email: info@hendi.eu

Hendi Polska Sp. z o.o.
ul. Firmowa 12
62-023 Robakowo, Poland
Tel: +48 61 658 7000
Email: info@hendi.pl

Hendi GmbH
Ehring 15
5112 Lamprechtshausen, Austria
Tel: +43 6274 200 10 0
Email: office.austria@hendi.eu

Hendi Romania S.R.L.
Str. 13 decembrie 94A, Hala 14
Brașov, 500164, Romania
Tel: +40 268 320330
Email: office@hendi.ro

PKS Hendi South East Europe SA
5 Metsovou Str.
18346 Moschato, Athens, Greece
Tel: +30 210 4839700
Email: info@pks-hendi.com

Hendi Italia S.R.L.
Via Leonardo da Vinci 4
39100 Bolzano (BZ), Italy
Tel: +39 800 727 438
Email: office.italy@hendi.eu

Hendi HK Ltd.
1208, 12/F Exchange Tower
33 Wang Chiu Road, Kowloon Bay, Hong Kong
Tel: +852 2154 2618
Email: info-hk@hendi.eu

Find Hendi on internet:
www.hendi.com
www.facebook.com/HendiToolsforChefs
https://www.linkedin.com/company/hendi-tools-for-chefs/
www.youtube.com/HendiEquipment

Changes, printing and typesetting errors reserved.

References

• hendi.com
• hendi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>