hp LaserJet Pro MFP 3102fdn Printer User Guide

June 9, 2024
HP

hp LaserJet Pro MFP 3102fdn Printer

Power on

Plug in and power on. On the control panel, choose your language and country/region.

hp-LaserJet-Pro-3002dn-Printer-1

Load paper

hp-LaserJet-Pro-3002dn-Printer-2

Load paper and adjust the guides.
Note: If loading paper larger than A4, pinch the button in the front of the tray and pull forward. The tray will extend forward by approximately 2.36 inches (60 mm).

Connect printer

On the control panel, choose your connection method. If the printer will support multiple users, select Ethernet.

hp-LaserJet-Pro-3002dn-Printer-4

Ethernet

  1. Connect an Ethernet cable from the printer to the same network as the computer.
  2. Press “OK” on the control panel to confirm the IP address. Then continue with the steps on the control panel until you reach the home screen.

USB

  1. Connect the USB cable to the port on the back of the printer and to the computer.
  2. Continue with the steps on the control panel until you reach the home screen.

Install printer software

  1. Go to hpsmart.com/download to download the HP software and print drivers.
  2. Install software and complete setup.

Get help with setup
Find setup information and videos online.

hp-LaserJet-Pro-3002dn-Printer-7

hp.com/support/ljmfp3101-3108

© Copyright 2023 HP Development Company, L.P.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
Printed in XXXXX
Printed in XXXXX
Printed in XXXXX
Printed in XXXXX
Printed in XXXXX
Printed in XXXXX
3G629-90009

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals