KEYSTONE KT-WPLED35-M1-8CSB-VDIM Traditional Non-Cutoff Led Wall Pack Owner’s Manual
- June 9, 2024
- Keystone
Table of Contents
KEYSTONE KT-WPLED35-M1-8CSB-VDIM Traditional Non-Cutoff Led Wall Pack
DESCRIPTION
Traditional 35W Non-Cutoff LED Wall Pack | 120–277V Input | 3000–5000K | Medium-Size Housing | Bronze Finish | Glass Lens
APPLICATION
Building mount for exterior illumination (perimeters, pathways, loading docks,
and other general security lighting requirements)
PRODUCT FEATURES
- Keystone Color Select technology (3000/4000/5000K)
- Traditional design that matches appearance and light distribution pattern of legacy HID fixtures. Optimized for one-for-one replacements
- Heavy duty die cast aluminum housing with (5) 1/2” threaded conduit hubs: (1) on back and (1) on all four sides
- Powered by Keystone 0–10V dimming LED drivers
- Built-in dusk-to-dawn photocell behind translucent 3/4″ threaded plug with anti-yellowing agent
- Borosilicate glass lens diffuses light source and provides uniform distribution
- Covers footprint of mid-size HID wallpacks
- Ambient operating temperature: −40ºC/−40ºF to 50ºC/122ºF
- UL Certified for wet locations; IP65 rated
- Fixture impact rating IK06
- Power Factor: >0.95
- THD: <20%
- LED chip lifetime: L70 >100,000 hrs @ 25ºC/77ºF ambient fixture temperature
- Meets FCC Part 15, Part B, Class A standards for conducted and radiated emissions
- Compatible with Keystone LED Emergency Backups. See Accessories page for more details
PRODUCT SPECIFICATIONS
Catalog Number| Wattage| Selectable **CCT*| Lumens|
Lumens Below 90º| Efficacy| Input Voltage|
Dimming| CRI| Rated Life| Legacy Equivalent|
Housing Color
---|---|---|---|---|---|---|---|---|---|---|---
** KT-WPLED35-M1-8CSB-VDIM| 35W| 3000K| 4885| 4400| 140 lm/W|
120–277V| 0–10V| >80| 50,000 hrs| 150W MH| Bronze
4000K| 5460| 4910| 156 lm/W
5000K| 5010| 4505| 143 lm/W
PHYSICAL SPECIFICATIONS
GENERAL SETUP INSTRUCTIONS
GENERAL WIRING DIAGRAM
Caution: Before installing, make certain that AC power to the fixture is
off.
Caution: The electrical rating of this product is 120–277V. Installer
must confirm that there is 120–277V at the fixture before installation.
PHOTOCELL ENABLE / DISABLE
This fixture is equipped with a dusk-to-dawn photocell behind the translucent
knock-out (KO) cover. Adjust the dip switch to enable (ON) or disable (OFF)
the photocell function (see illustrations to the right). Fixture comes preset
with photocell enabled unless otherwise noted.
COLOR SELECT (CCT) ADJUSTMENT
This fixture is equipped with Color Select technology. There is an adjustable
dip switch behind the translucent knock-out (KO) cover to change CCT between
5000K, 4000K, and 3000K (see illustrations to the right). Fixture comes preset
at 5000K unless otherwise noted.
PHOTOMETRIC SPECIFICATIONS
ISOCANDELA PLOT
LUMINOUS INTENSITY DISTRIBUTION
FLUX DISTRIBUTION
Zone | Lumens | % Luminaire |
---|---|---|
Forward Light | 3,845 lm | 79.5% |
0º–30º | 591 lm | 12.2% |
30º–60º | 1,673 lm | 34.6% |
60º–80º | 1,166 lm | 24.1% |
80º–90º | 416 lm | 8.6% |
Back Light | 507 lm | 10.5% |
0º–30º | 210 lm | 4.4% |
30º–60º | 227 lm | 4.7% |
60º–80º | 59 lm | 1.2% |
80º–90º | 10 lm | 0.2% |
Up Light | 481 lm | 9.9% |
90º–100º | 215 lm | 4.4% |
100º–180º | 267 lm | 5.5% |
**BUG* Rating
Asymmetrical Luminare Types
Type I, II, III, IV| B1 U3 G3
Quadrilateral Symmetrical Luminare Types**
Type V, Area Light| B1 U3 G3
MOUNTING
Side view
LIGHT DISTRIBUTION PATTERN
Isometric view from above; Luminaire mounted at 15′
ACCESSORIES
SENSORS
Factory-Installable OR Field-Installable (field-installable purchased
separately).
✓| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY
CODE**
---|---|---|---|---|---
| /MW3| KTS-MW3-UV-KO-K1| Microwave Sensor Kit, Includes 120-277V input to
12V DC convertor & 12V input sensor head, IP65. Bi-Level Control with
Adjustable Hold Time, Dim Level and Standby Time. Installs via standard 1/2in
KO| 843654134147| BKG-51
Microwave Sensor Kit KTS-MW3-UV-KO-K1|
* For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
CORD SETS
Factory-Installable OR Field-Installable (field-installable purchased
separately).
✓| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY
CODE**
---|---|---|---|---|---
| /515P6| KT-CS-515P-6-18/3| Cord set for high bay; 125V NEMA 5-15P; straight
blade plug; 6′ SJTOW cable; 18/3 wire| 843654140124| UKH-26
| /L515P6| KT-CS-L515P-6-16/3| Cord set for high bays; 250V NEMA L5-15P;
twist lock plug; 6′ SJTOW cable; 16/3 wire| 843654140186| POC-82
Cord Sets|
* For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
Note: For cord sets not listed here, please contact your Keystone sales rep.
EMERGENCY BACKUP
Factory-Installable OR Field-Installable (field-installable purchased
separately).
✓| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY
CODE**
---|---|---|---|---|---
| /EM12| KT-EMRG-LED-12C-1200| LED Emergency Back-Up, 12W Constant Wattage
Design. Approx 1200 Lumens. 120-277V Input. Remote Compact Battery Pack. CEC
T20 Compliant.| 843654103112| OJQ-32
| –| KT-EMRG-LED2-TS-IP65| IP65 Rated Wet Location Test Switch for 5W and 12W
CEC Compliant LED Emergency Packs| 843654130019| MDB-29
12W, 1200 lumen Battery Backup KT-EMRG-LED-12C-1200| | Wet Location Test
Switch KT-EMRG-LED2-TS-IP65|
MOUNTS AND BRACKETS
Field-Installable / Field-Use ONLY (purchased separately).
✓| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY
CODE**
---|---|---|---|---|---
| –| KT-WPLED-BP-M| Back Plate for Medium Size Wallpacks, Covers Legacy Style
Large HID Housing Dimensions. Standard Bronze Color.| 843654130613| CCJ-21
Back Plate
KT-WPLED-BP-M
|
* For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
Note: This is needed with EM – will be added when factory installing EM
SURGE PROTECTORS
Factory-Installable OR Field-Installable (field-installable purchased
separately).
✓| **SUFFIX*| CATALOG NUMBER| DESCRIPTION| UPC| EASY
CODE**
---|---|---|---|---|---
| /10KV| KTSP-10KV-C| External Surge Protector, compact design. Parallel
Wiring, 120-277V Input, Max Peak Protection (10KV, 10KA)| 843654129204| BUU-26
External Surge Protector KTSP-10KV-C|
* For factory installation of accessory, add suffix to fixture part number (see ordering examples and instructions on last page of spec sheet).
ORDERING INFORMATION
CATALOG NUMBER | PACK QTY. | EASY CODE | UPC |
---|---|---|---|
KT-WPLED35-M1-8CSB-VDIM | 1 | SXE-77 | 843654129013 |
CATALOG NUMBER BREAKDOWN
- Keystone Technologies
- Fixture Type
- LED Lamp
- Wattage
- Size
- Style
- CRI
- Color Select
- Color Select Designation
- Dimming
- Accessories (see below for details)
ORDERING EXAMPLES
Keystone Technologies • Philadelphia, PA
Phone 800-464-2680
www.keystonetech.com
Specifications subject to change. Last revised on 01.23.23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>