Keystone PRK-LED-24-50PS-8CSA LED Panel Doorframe Retrofit Kit Owner’s Manual
- June 9, 2024
- Keystone
Table of Contents
Keystone PRK-LED-24-50PS-8CSA LED Panel Doorframe Retrofit Kit Owner’s
Manual
PRODUCT FEATURES
- Used to Upgrade existing 2×4 fluorescent recessed troffer, without modifying existing fixture mounting.
- CCT Selectable (3500K, 4000K, or 5000K)
- Wattage Selectabe (50W, 40W, or 30W)
- Construction features precise optical lenses over each individual LED, offering optimal light diffusion and consistent surface illumination, with no risk of yellowing over product lifetim
PERFORMANCE SPECIFICATIONS
Catalog Number| Input Voltage| Wattage| Color Temperature|
Lumen Output| CRI| Power Factor| Efficacy| Lifetime
---|---|---|---|---|---|---|---|---
PRK-LED-24-50PS-8CSA*
|
120-277V
|
50W
| 3500K| 5,500|
80
|
0.9
| 110 lm/W|
50,000 Hours
4000K| 5,600| 112 lm/W
5000K| 5,600| 112 lm/W
120-277V
|
40W
| 3500K| 4,400| 110 lm/W
4000K| 4,500| 113 lm/W
5000K| 4,500| 113 lm/W
120-277V
|
30W
| 3500K| 3,300| 110 lm/W
4000K| 3,400| 113 lm/W
5000K| 3,400| 113 lm/W
ONE CATALOG NUMBER WITH 9 DIFFERENT OPTIONS
- Preset to highest lumen output (50W / 5000K)
- Color Uniformity: CCT (Correlated Color Temperature) range as per guidelines outlined in ANSI C78.377-2017.
PHOTOMETRIC SPECIFICATIONS
| Zone | Lumens | % Luminaire |
|---|---|---|
| 0-60 | 4,349.9 | 77.8% |
| 60-90 | 1,240.4 | 22.2% |
| 0-90 | 5,590.3 | 99.9% |
| 90-180 | 2.7 | 0.05% |
| 0-180 | 5,493.0 | 100% |
NOTE: Charts are represeneted by 5000K
WEIGHT INFORMATION
1 Piece
12.5 lbs
INSTALLATION INSTRUCTIONS
Always turn off the power supply from main circuit breaker first!
-
Dismantle accessories from the original housing (ballast, fluorescent tube, sockets, bracket and other accessories that may interfere the installation). Note: The original housing must be retained in place. Reserve the L&N wire of original housing to connect retrofit kit in later step. Plug previous holes from ballast with appropriate screws and nuts
-
Insert the two brackets into the clearance between the housing and T-grid
-
Insert the two side bars into the clearance between the brackets and the T-grid.
-
Using the included self-tapping screws, use electronic screwdriver to secure brackets into place through bracket mounting holes from inside of the fixture. Caution: Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Ensure that enclosed wiring and components have not been damaged.
-
Embed the rotary screws on the edge of the panel into the bracket chutes. Push to the end in the direction of chutes to secure panel.
-
Connect L&N wire from original housing to the driver of the retrofit using appropriate connectors. If using 0-10V dimmer, connect DIM+,DIM- to 0-10V dimmer wires. Connect the green ground wire of the retrofit kit to the fixture with a wiring cap to ensure grounding safety
-
Attach clips from the retrofit kit to the brackets.
-
Close the retrofit kit door into the fixture and rotate the clips to secure the door closed.
COMPONENT SUMMARY
| CATALOG NUMBER | QUANTITY |
|---|
LED Module including – LED Driver/Power Supply and LED Array (Not Field
Replaceable)| 1
Mounting Bars| 2
Mounting Brackets| 2
Installation Instructions| 1
Luminaire Marking Labels| 1
Miscellaneous Hardware include 4 pcs M4.6*13 screws| 1
ORDERING INFORMATION
| CATALOG NUMBER | CARTON QTY. | EASY CODE | UPC |
|---|---|---|---|
| PRK-LED-24-50PS-8CSA | 1 | EZC-37 | 843654136714 |