AXSURE SOP23 Bluetooth Smart Plant Grow Light Instruction Manual
- June 9, 2024
- AXSURE
Table of Contents
AXSURE SOP23 Bluetooth Smart Plant Grow Light
OPERATION GUIDE
Connect the App
- Step1 : Scan the QR code or search for “Smart Life” or “Tuya” in the APP Store and download and install the APP.
- Step2 : Log in to the APP.
- Step3 : Add Device
Method : Add Device Automatically
- Tum on the Bluetooth on your phone
- Turn on the plant light and long press the power switch for about 5 seconds. The LED red light will flash regularly and the device will enter the Bluetooth pairing mode at this time.
- Open the APP, click” Add device ” or click “+” on the top right, and then choose” Auto Scan”. Click” go to add” when the Smart Plant Grow Light device is found.
APP Control
- Open home page of the APP, and slide the brightness bar for Stepless Dimming of the whole light.
- Select timing mode: the light can be set to turn on/ off at any lime for “Area A”, “Area B” or ” the Whole Light” , each of them can be set 10 schedules of timing at most.
- Select DIY mode: The lamp can be set light ratio of different lighting modes for “Area A” , “Area B” or” the Whole Light “. (1) RBW(Red +Blue+ warm white), RB(red + blue): 19 levels of light ratio optional setting & stepless adjustment of brightness; @ W (warm while) : stepless adjustment of brightness.
- Select normal mode: The plant lamp can be set as 4 light ratios to light with “Area A” “Area B” or “the Whole Light” for the Germination/ Growing/ Flowering/ Fruiting period of the plant.
Features of Smart Plant Grow Lamp
-
Bluetooth smart 4 Heads Plant Light is adopted Bluetooth5.0 communication. The lamp can be timed and set spectral ratio freely and conveniently via the mobile phone app.
And the 4 headlamp can be divided into 2 Areas to control respectively, to set different spectral ratio and timing schedule. -
Commonly used plant grow light ratio:
ATTENTION
- There should be a distance of 11-20 inches between the plant and the light. Different plants need different hours of light, no more than 16 hours of light per day (suggestion).
- The product is mainly suitable for home, and small workshops. Each light is suitable for 3-5 small plants.
- Please Keep enough water for the plants when you use the grow light.
WARNING
- The product is only suitable for home, do not spray water on the lamp! II is not waterproof.
- To prevent damage or wear to the wires, do not place them on sharp metal edges.
- Non-professionals are not allowed to disassemble or transform the product, which may cause fire and electric shock.
Tip
If you wanna connect the Alexa, please purchase Bluetooth gateway equipment to
achieve Alexa control. If you still have questions, please feel free to
contact us.
EU Email : eu@imaxsure.com
US Email: customer-support@joestarus.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>