JBC B·iRON 115 Battery High Precision Station Instruction Manual

: June 9, 2024
: JBC

JBC B·iRON 115 Battery High Precision Station Instruction Manual

Packing List

The following items are included:

Features and Connections

B·iRON Console
Note: for references without console blue tooth device like PC or mobile can be connected.

Quick Start

Connection Connect the stand to the mains (100 – 240 V)
.
Cartridge Insertion and Charging

Insert a cartridge into the tool (1) and place it into the charger on the stand (2).
Note: Charge the tool completely (30 min) before using for the first time.\

The status indicator light idicates as follows the tool status:green| working/soldering
---|---
green blinking| charging
alternating red/green blinking| low battery, less than 20%
red blinking:| no cartridge
no color:| power OFF
Switching on Console/Device

Turn on the console/device and open the B·iRON
Application:
Selecting Tool Select the tool from the detection list.

Console Work Screen

The work screen shows the graph of the current tip temperature and the power supplied to the tip by moving the graph permantely to the left.

Operation

The JBC Most Efficient Soldering System

This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature. As a result, tip life increases by 5.

Work When the tool is lifted from the stand the tip will heat up to the selected temperature.

Charging and Hibernation

When the tool is in the stand enters into Hibernation Mode and cools down to room temperature. While the tool remains in the stand, it charges

Note: When the tool is lifted from stand the Soldering System acts as follows:

Hibernation

When the tool is outside of the stand and remains inactive (no movement), the tool enters into Hibernation mode and cools down to room temperature.

Turned Off If the tool has been inactive for a longer period of time, it is turned off.

Turned On

To turn the tool on, put it back into the stand.

Note: If desired, the tool can be swithed off/on. Tab the Tool Power button at the tablet screen (bottom right) to switch it off/on.

Grafics

The work screen shows the automatic recording of the temperature and power grafics.
The automatic recording can be pause by tapping the screen at the grafic area. The automatic recording stops also when the tool stops working.
While the automatic recording is stopped, you can get the temperature/power value in a concretB point by tapping the graph on the tablet screen.

The grafic can be moved to the left and right by swiping the touch screen sideways with one finger.
The recording starts automatically as soon as the tool is removed from the stand and the graphic automatically jumps to the end of the last recording and continues with the recording

Note: When the tool is placed in the stand and is not in use, the temperature/power recording stops. A gap can then be seen in the curve graphics

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip

The antisplash membrane prevents splashing and keeps the work area clean.
Includes a temperature resistant wiper for removing excess solder by gently tapping or wiping the cartridge tip.
If the tip is very dirty, JBC recommends first cleaning it with the wiper to remove excess solder and than with the brass wool.

Wiper

Tapping

Tap gently to remove excess solder

Wiping

Use the slots to remove remaining particles

Replacing Brass Wool

Lifting Lift and remove the antisplash membrane
Replacing Replace the brass wool with a new one. Make sure that the brass wool is on the far left and that there is space for the wiper on the right
Assembling Assemble the antisplash membrane in vertical direction onto the stand
Pressing on

Note: The brass wool and the wiper position can be reversed by rotating the antisplash membrane 180 degrees

Quick Tip Changer

Save time and change cartridges safely without switching the station off

Removing

Place the handpiece in the extractor and pull to remove the cartridge
Inserting

Place the handpiece on top of the new cartridge and press down slightly.

*Important: Insert the cartridge until the metal ring comes to a stop. The charging indicator light changes from red to green when the cartridge is proprely inserted.

Compatible Cartridges

B 115 Pecision Tool works with C115 Cartridges.
Find the model that best suits your soldering needs in www.jbctools.com

Changing the Grips

For Precision Tool Ref. B210-A and for Nano Tool Ref. B115-A soft foam grips Ref. 0026437 are available. Remove the prior grip and replace the grips easily using the slip-on tabs. To change the grips do as follows:

Inserting Tabs

Put the slide-on tabs into the new grip
Inserting Handle

Push the grip with the tabs onto the handle.
Removing Tabs

Hold the grip and pull the tab. Use pliers if necessary

The B·iRON Console offers an intuitive user interface that provides quick access to station parameters.

Parameters

B·iRON Update

Download the JBC update file from: https://www.jbctools.com/jbcsoftware.html
Connect the console/device via USB connection to the PC.
On the console/device notification bar at the top, open “USB Connection Settings” and select “MTP”.
On the PC copy the downloaded file to “IT706/internal share storage/JBC”.
Once copying is finished, disconnect the console/device from the PC.
On the console/device open the Application (1) and then select “update” (2) on the Application Menu.
Use the update button of the version to be downloaded

Maintenance

Before carrying out maintenance, always extract the cartridge and disconnect it from the mains. Allow the equipment to cool down.

Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts.
Periodically check that the metal parts of the tool and stand are clean so that the charging works properly.
Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint.
Do not use liquid such as alcohol, thinner or benzene to clean the console.
Repairs should only be performed by a JBC authorized technical service

Safety

NOTE: It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.
The power cord must be plugged into approved bases. When unplugging it, hold the plug, not the wire.
Do not work on electrically live parts.
The tool should be placed in the stand when not in use in order to charge the batteries.
The cartridge tip or nozzle, the metal part of the tool and the stand may still be hot even when the station is turned off.
Do not leave the appliance unattended when it is on.
Avoid flux coming into contact with skin or eyes to prevent irritation.
Be careful with the fumes produced when soldering.
Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
Utmost care must be taken with liquid tin waste which can cause burns.
This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
Maintenance must not be carried out by children unless supervised.
Do not expose the console to high temperatures, humidity or dust. Avoid direct sunlight.
Do not drop the console as it may cause damage or malfunction.
Do not disconnect your device when it is in file transfer mode.
Do not use the console in places were electronic devices are resticted.

Specifications

B·iRON 115
Nano B·iRON Station

With Console

Ref.: BI115UA 120 V – N. America
Ref.: BI115IA 230 V – India
Ref.: BI115A 230 V – Europe
Ref.: BI115KA 230 V – United Kingdom
Ref.: BI115HA 230 V – China
Ref.: BI115JA 100 V – Japan

Stand:

Input:
Power:
Tool output:
USB output:

Tool:

Output Peak Power:
Battery:
Charge Time:
Temp. Accuracy:
Connections:
Tool Weight:

With Console

Total Net Weight:
Total Package Dimensions/Weight:(L x W x H)

Without Console

Total Net Weight:
Total Package Dimensions/Weight:(L x W x H)

Complies with CE standards
ESD safe
Not grounded device. No ESD discharge feature.

Without Console

Ref.: BI115UQA 120 V – N. America, Taiwan Ref.: BI115IQA 230 V – India
Ref.: BI115QA 230 V – Europe
Ref.: BI115KQA 230 V – United Kingdom Ref.: BI115HQA 230 V – China
Ref.: BI115JQA 100 V – Japan

100 V – 240 V 50/60 Hz
15 W
12 V / 350 mA
5 V / 1000 mA

15 W
Li-Ion 7.4 V / 120 mAh
40 minutes
±1.5 °C / ±3 °F
±3% (Using reference cartridge) Bluetooth Low Energy (BLE)
10 – 50 °C / 50 – 122 °F
30 g / 0.07 lb

1437 g / 3.17 lb
265 x 223 x 160 mm / 1995 g
10.43 x 8.78 x 6.30 in / 4.40 lb
973 g / 2.15 lb
225 x 223 x 160 mm / 1531g
8.86 x 8.78 x 6.30 in / 3.38 lb

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.