Hard Head 013978 Dummy Camera Instruction Manual

June 4, 2024
Hard Head

Hard Head 013978 Dummy Camera

Hard-Head-013978-Dummy-Camera-product-image

SYMBOLS

The following symbols may occur on the product.

  • Read the instructions.

  • Approved in accordance with the relevant directives.

  • Recycle discarded product in accordance with local – regulations.

TECHNICAL DATA

  • Battery 2×1.5 V AAA

INSTALLATION

  1. Undo the screw holding the front of the dummy camera.
  2. Pull the front straight out.
  3. Pull the dummy camera’s “lens” straight out. This is the battery holder.
  4. Open the battery holder’s cover.
  5. Insert two 1.5 V AAA batteries. Check the correct polarity.
  6. Replace everything in the reverse order.
  7. Install the camera in the required location.
  8. The status light flashes to give the appearance of a real camera.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals