inepro KUARIO MFP Kiosk Application Installation Guide
- June 9, 2024
- inepro
Table of Contents
KUARIO MFP Kiosk – Ricoh MFP via WIM
© 2023 inepro B.V. All rights reserved.
Congratulations on your choice of the KUARIO MFP Kiosk. We are confident that you will be satisfied with your purchase of one of the most flexible solutions on the market.
To help you get the most out of your KUARIO MFP Kiosk, please read this manual carefully. This manual is subject to change without notice due to continuous product improvements.
We strongly recommend that you read the licence agreement thoroughly to fully understand your rights and responsibilities as the owner.
If you have any questions or comments, your dealer will be happy to assist you.
We strongly encourage you to read the licence agreement thoroughly to fully
understand its coverage and your responsibilities as an owner.
Your dealer is committed to your satisfaction and will be happy to answer your
questions and concerns.
Our best wishes,
inepro B.V.
KUARIO MFP Kiosk – Ricoh MFP via WIM – Installation Manual
All rights reserved. No part of this work may be reproduced in any form or by any means – graphic, electronic or mechanical, including photocopying, recording, taping or information storage and retrieval systems – without written permission from the publisher.
Products referred to in this document may be trademarks and/or registered trademarks of their respective owners. The publisher and the author make no claim to these trademarks.
Although every precaution has been taken in the preparation of this document, the publisher and the author accept no liability for errors or omissions, or for damages resulting from the use of information in this document or from the use of programmes and source code accompanying it. In no event shall the publisher and author be liable for any loss of profits or any other commercial damages caused or alleged to have been caused directly or indirectly by this document.
Revision number R 3. This revision of the manual can be applied to products with version 3.0 or higher.
Publisher
inepro B.V.
Managing editor
K. de Graaf
Technical editor(s)
J. Schouten
Cover design
K. de Graaf
M. Sterk
Team coordinator
R. Groen
Production
inepro B.V.
KUARIO MFP Kiosk – Ricoh MFP via WIM
Table of contents
Ricoh installation via WIM
Ricoh installation via WIM
Ricoh installation of KUARIO MFP KIOSK via WIM
Step 1: Go to the printer’s Web Image Monitor (WIM) and log in as
Administrator
Step 2: Go to Device Management and click on Configuration
Step 3: Go to Extended Feature Settings and click on Install
Step 4: Select Local File and add the KUARIO MFP Kiosk as a .zip.
Step 5: Click Display Extended Feature List (it looks like nothing is
happening, but it can sometimes take quite some time to load).
Step 6: When step 4 has finished loading, you get the screen below. Click on the KUARIO MFP Kiosk bullet and click Install.
Step 7: Confirm that you want to install the KUARIO MFP Kiosk by clicking OK.
Step 8: The screen will automatically return to the screen below.
The installation is now complete •
KUARIO MFP Kiosk – Ricoh MFP via WIM