speco technologies HT7040TM 1080p 2MP Intense IR Bullet Camera Wall/Ceiling Mount Instruction Manual

: June 9, 2024
: speco technologies

Table of Contents

DIMENSIONS
FEATURES
SPECIFICATIONS
OSD MENU TREE
- MAIN SETUP
OSD CONTROL
OSD MENU Details
LIMITED WARRANTY – VIDEO PRODUCTS
- CONDITIONS
- EXCLUSIONS
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

speco technologies HT7040TM 1080p 2MP Intense IR Bullet Camera WallCeiling Mount

DIMENSIONS

FEATURES

Full HD resolution over coax (HD-TVI)
Supports up to Full HD 1080p @ 30fps
True WDR operation
Intense IR function – no saturation, IR intensity adapts to subject to provide vivid image
Built-in heater and anti-fog glass reduces condensation
3-axis for wall and ceiling mounting
Full OSD operation through on-board control and UTC (up the coax)
Additional 960H analog output
Signal distance up to 1600 feet*
IP67 compliant, weather resistant
12VDC & 24VAC dual voltage operation
5 year warranty

SPECIFICATIONS

Image Sensor…… 1/2.9” Progressive Scan CMOS, 2MP
Minimum Illumination……. 0.00 lux (IR LED on)
Effective Pixels……. 1984 (H) x 1105 (V)
Total Pixels……. 2000 (H) x 1121 (V)
Scanning System…… Progressive
S/N Ratio……. More than 50dB
Output Resolution…… 1920×1080 @ 30fps
Video Output…….. 1.0Vp-p / 75 Ohms
Electronic Shutter…… Auto / Manual (1/30 – 1/30,000 sec.)
Day / Night…….. Auto / Color / BW / External
Test Monitor Output…… CVBS (BNC out in Yellow)
Communication…… UTC (up the coax)
Power…….. 12VDC / 24VAC
Power Consumption…….. 900mA max. (DC), 750mA max. (AC)
Operating Temperature…. -4° F – 122° F
Unit Dimensions…….. 9.64” (L) x 3.72” (Dia.)
Unit Weight……. 2 lbs (camera), 0.9lbs (junction box)
Certifications…….. FCC, RoHS
Signal Distance…… Up to 1600 feet
(depending on coax quality)*

MAIN SETUP

OSD CONTROL

IRIS : ‘ALC’ as a default value

2-MOTOR : AF Mode, Scanning, OnepushAF, Sync TDN, Initial

EXPOSURE : adjusts exposure settings.
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Outdoor / Indoor / Deblur
INTENSIFY : Sets the desired multiple of the digital exposure length.
AGC(Auto Gain Control): Adjusts the AGC level. (0~10)

BACKLIGHT : Adjusts backlight options.

WDR : WDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark area
– Adjusts the WDR Weight (LOW/MIDDLE/HIGH) * CVBS out cannot adjust this function.
BLC : Produces a clearer image of an object darkened by strong backlighting.
– H-POS : Adjusts the horizontal position(0~20)
– V-POS : Adjusts the Vertical position(0~20)
– H-SIZE : Adjusts the horizontal block size (0~20)
– V-SIZE : Adjusts the vertical block size (0~20)
HLC : Uses to contain extremely bright areas such as from car headlight, the light can be masked out much of the on-screen details.

DAY / NIGHT : Adjust Day / Night options.

COLOR : Always Color mode, Default value for these cameras
B/W : Always B/W mode.
– ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
EXT : This mode allows you to apply a desired filter to external signals.
– ANTI-SAT. : Adjusts the Anti Saturation level (0~20)
– EXTERN S/W : Selected at manufacturer side
– D N LEVEL (0~20) : Selected at manufacturer side
– N D LEVEL (0~20) : Selected at manufacturer side
– DELAY : Adjusts the changing delay time (LOW/MIDDLE/HIGH)
AUTO : this mode is not available for this camera

COLOR : Adjusts white balancing options.

AWB : it goes to optimized color level automatically.
COLOR GAIN : Sets the desired Color Gain value (0~20)

SPECO DNR : Uses to reduce the background noise in a low luminance environment with 2D + 3D filtering system.

MAGE : Adjusts various image options.
SHARPNESS: Adjusts sharpness level. Increasing this value, the picture outline becomes stronger and clear. (0~10)
GAMMA : Sets the desired Gamma value. (0.45 ~ 0.75)
MIRROR : Change the video direction horizontally.
FLIP: Change the video direction perpendicularly.
ACE (D-WDR) : Uses a digital wide dynamic range to balance dark and over saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
PRIVACY : Used to hide regions of the image.

MOTION : Adjust motion detection settings.

DET WINDOW
DET TONE
MDRECT FILL
SENSITIVITY : Sets the desired of “Motion” (0~20)
MOTION OSD
TEXT ALARM
SIGNAL OUT

SYSTEM : Adjusts various camera system options.

OUTPUT
MAIN OUTPUT ANALOG OUT0
ANALOG OUT0 TVI
Y GAIN
CB GAIN
CR GAIN
POSITION
BURST FREQ
BURST GAIN
B&W
UCC SELECT
720EX
FRAME RATE: 1080P 30 / 720P 60
FREQ 60Hz
COM.
IMAGE RANGE
COLOR SPACE
COLOR BAR : Manufacturer’s option
LANGUAGE : Sets the desired OSD language
CAM TITLE
RESET: Press with long to reset all settings to factory defaults.

LIMITED WARRANTY – VIDEO PRODUCTS

THIS WARRANTY IS VALID ONLY ON PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF ANIERICA AND CANADA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL USER.

SUBJECT TO CONDITIONS AND EXCLUSIONS FOUND BELOW. THIS PRODUCT IS WARRANTED AGAINST MANUFACTURING DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE FOLLOWING PERIOD FOR PARTS AND LABOR:

SPECO TECHNOLOGIES CAMERAS …. 5 YEARS
DVRs ……… 5 YEARS
SPECO TECHNOLOGIES IP CAMERAS … 5
YEARS NV.Rs ….. 5 YEARS
SP ECO PTZ .…. 1 YEAR BALANCE OF
SPECO TECHNOLOGIES MONITORS … 1 YEA·
R SPECO TECH:NOLOGIES LINE ….. 1 YEAR
IR LEDS … 90 DAYS

SPECO TECHNOLOGIES WILL REPAIR OR REPLACE (AT OUR DISCRETION) ANY PARTS FOUND TO BE DEFECTIVE FOR THE WARRANTY PERIOD SPECIFIED. WE WILL PROVIDE A REPLACEMENT FOR ANY DEFECTIVE PART.

CONDITIONS

YOU MUST OBTAIN A RETURN AUTHORIZATION (RA) NUMBER FOR ANY MERCHANDISE BEING RETURNED TO SPECO TECHNOLOGIES, WHETHER FOR RETURN/EXCHANGE OR REPAIR, WHETHER IN OR OUT OF WARRANTY,
THIS WARRANTY WILL BE HONORED ONLY UPON PRESENTATION OF THE ORIGINAL DATED BILL OF SALE OR SALES SLIP.
TRANSPORTATION OF THE PRODUCT TO OUR SERVICE DEPARTMENT IS THE RESPONSIBILITY OF THE USER. REPAIRED OR REPLACED PRODUCT WILL BE RETURNED PREPAID DURING THE WARRANTY PERIOD.
SPECO TECHNOLOGIES DOES NOT AUTHORIZE ANY INTERNET OR MAIL ORDER PRODUCT SALES. IF A SPECO TECHNOLOGIES PRODUCT IS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR OR OTHER SOURCE. INCLUDING RETAILERS, MAIL ORDER SELLERS AND ONLINE SELLERS. IT WILL NOT BEHONORED OR SERVICED UNDER THE EXISTING SPECO TECHNOLOGIES WARRANTY POLICY. ANY SPECO TECHNOLOGIES PRODUCT PURCHASED FROM THESE ONLINE MERCHANTS WILL VOID THE APPLICABLE WARRANTY AND IS INELIGIBLE FOR TECHNICAL SUPPORT. IF YOU HAVE QUESTIONS ABOUT A RESELLER. PLEASE CONTACT SPECO TECHNOLOGIES AT 1-800-645-5516 FOR A LIST OF UNAUTHORIZED DEALERS. VISIT: www.specotech.com/unauthorized.

EXCLUSIONS

THIS WARRANTY SHALL NOT COVER ADJUSTMENT OF CUSTOMER OPERATED CONTROLS AS EXPLAINED IN THE APPROPRIATE MODEL’S INSTRUCTION MANUAL OR PRODUCTS WHICH HAVE BEEN ALTERED, ABUSED. OR HAVE MISSING OR ALTERED SERIAL NUMBERS.
THIS WARRANTY SHALL NOT APPLY TO UNCRATING. SETUP, INSTALLATION. OR THE REMOVAL AND REINSTALLATION OF PRODUCTS AFTER REPAIR.
THIS WARRANTY SHALL NOT APPLY TO REPAIRS OR REPLACEMENTS NECESSITATED BY ANY CAUSE BEYOND THE RESULT OF MANUFACTURE INCLUDING. BUT NOT LIMITED TO. ANY MALFUNCTION. DEFECTS OR FAILURE CAUSED BY OR RESULTING FROM UNAUTHORIZED SERVICE OR PARTS. IMPROPER MAINTENANCE. MODIFICATION OR REPAIR BY THE USER. ABUSE, MISUSE. NEGLECT. ACCIDENT. FIRE. FLOOD. OR OTHER ACTS OF NATURE. INCORRECT LINE VOLTAGE. DAMAGE OR IMAGE BURNS TO TELEVISION PICTURE TUBES CAUSED BY OR ATTRIBUTABLE TO THE USE OF ANY ACCESSORY, ELECTRONICS GAME OR DEVICE, OR DAMAGE CAUSED TO IMAGE PICKUP DEVICES BY EXCESSIVE LIGHT.

THE FOREGOING IS IN LIEU OF ALL OTHER EXPRESSED WARRANTIES AND WE DO NOT AUTHORIZE ANY PARTY TO ASSUME FOR US ANY OTHER OBLIGATION OR LIABILITY. IN NO EVENT SHALL WE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT. OR FOR ANY DELAY IN THE USE OF THIS PRODUCT DUE TO CAUSES BEYOND OUR CONTROL. SOME STATES DO NOT ALLOW LIMITATIONS OF HOW LONG AN IMPLIED WARRANTY LASTS AND)OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES. THE ABOVE LIMITATIONS ON IMPLIED WARRANTY AND CONSEQUENTIAL DAMAGES MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. NOTE: FOR YOUR PROTECTION IN THE EVENT OF THEFT OR LOSS OF THIS PRODUCT. PLEASE FILL IN THE INFORMATION REQUESTED BELOW AND RETAIN WITH YOUR SALES RECEIPT

MODEL NO.: __ SERIAL NO.: __ (LOCATED ON BACK OR BOTTOM OF UNIT)
DATE OF PURCHASE:
WHERE PURCHASED:———— PURCHASE PRICE: ___

Speco Technologies 200 New Highway Amityville, NY 11701 www.specotech.com
FOR MORE INFORMATION REGARDING SERVICE OR RETURN. CALL US TOLL FREE: 1-800-645-5516 IN METRO NY: 631-957-8700

ALWAYS USE DISCRETION WHEN INSTALLING VIDEO AND/OR AUDIO SURVEILLANCE EQUIPMENT ESPECIALLY WHEN THERE IS AN EXPECTATION OF PRIVACY. INQUIRE REGARDING FEDERAL. STATE AND/OR LOCAL REGULATIONS APPLICABLE TO THE LAWFUL INSTALLATION OF VIDEO AND/OR AUDIO RECORDING OR SURVEILLANCE EQUIPMENT. PARTY CONSENT MAY BE REQUIRED.

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 220415