alza power APW-CCWF440 Wireless Car Charger User Manual

: June 9, 2024
: alza power

Table of Contents

THANK YOU FOR CHOOSING US!
TECHNICAL PARAMETERS
OVERVIEW
USE
SAFETY INFORMATION
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**alza power APW-CCWF440 Wireless Car Charger

**

THANK YOU FOR CHOOSING US!

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.
We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat… Well, almost. 🙂

We use ink made from soybeans as opposed to classic petroleum-based ink.
The majority of our packaging is made from 100% recyclable paper.
We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice.
We don‘t just try to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

Input voltage (USB-C input)| 5 V⎓ 2 A (10 W)

9 V⎓ 2 A (18 W)

12 V⎓ 1.5 A (18 W)

---|---
Max. output power| 15 W
Efficiency| >75%
Wireless output power| 15 W; 10 W; 7.5 W; 5 W
Wireless charging efficiency| ≥80 %
Wireless charging distance| 10 mm
Charging frequency| 110–205 KHz
Supported fast charging standards| QC 3.0, USB PD
Dimensions (charging base)| 72.5 × 66.9 × 93 mm
Weight| 107 g
Recommended phone size| 60/86 mm (Min/Max)
Length of USB-C on USB-C cable| 100 cm
Operating temperature| -10–40 °C
Storage temperature| -20–85 °C
Operating humidity| 5 – 90 %
Storage humidity| 0 – 95 %

OVERVIEW

Charging base Used to insert the phone
Telescopic arms Hold the phone securely
Holder for ventilation holes
Phone release button
Terminal for attaching the holder
Dashboard / windshield holder
Charging connector Connector for attaching a USB-C charging cable

USE

Attachment to ventilation holes

Insert the retaining nut on the hinge of the ventilation holes holder and then release the lock under the holder.
Insert the holder on the air vent grilles until the lock rests on the dashboard.
Place the charging base on the joint and secure with the retaining nut.
Insert the end of the USB-C cable into the USB-C charging connector. Insert the other end into the USB-C connector of the charger and plug in the cigarette lighter (not included) in your car.

Holder attachment to dashboard / windshield

Clean the area on the dashboard / windshield where you want to place the holder.
Place the holder in the desired place and secure it with the lock on the inside of the holder.
The lower part is equipped with a suction cup, which ensures maximum adhesion to the surface.
Insert the retaining nut and coupling on the dashboard / windshield joint.
Place the charging base on the joint and secure with the retaining nut.
Adjust the distance and angle of the holder according to personal preferences.
Insert the end of the USB-C cable into the USB-C charging connector. Insert the other end into the USB-C connector of the charger and plug in the cigarette lighter (not included) in your car.

Charging
The APW-CCWF440 Wireless Charger is compatible with most smartphones that support the wireless charging function.

Insert the phone into the charging base and the arms will automatically clamp on it to ensure that the phone does not fall off the base. The charging process starts automatically.
If you need to remove the phone, press the phone release button on the back of the base.
The arms open and you can remove the phone comfortably.
If the LEDs on the sides of the base flash during charging, the phone will automatically stop charging. The charging current was too high, or a foreign object has entered between the charging base and the phone. In this case, remove the phone from the charging base and check the input voltage parameters on the charging base and the adapter used, or remove the foreign object.
Note: The charging chip automatically detects the holder of the phone and, depending on its location, can determine the best charging point on the phone to ensure maximum efficiency.

SAFETY INFORMATION

Please check compatibility with the information specified on the product before use.
This product is not a toy. It may contain small components. Please keep away from children.
Do not use the product to charge devices that require a charging current greater than that specified in the technical specification. Once your device is fully charged, disconnect it from the product.
Unplug the product from the cigarette lighter socket when not in use.
Only use the product for the specified purpose of use.
It is forbidden to handle the product as well as the inserted phone while driving. Pay full attention to driving.
Incorrect use of the product can lead to a risk of fire, explosion or other hazard and can result in a voided warranty.
Do not use or leave the product in dusty or otherwise contaminated environments.
Do not expose the product to extreme temperatures, direct sunlight, heat sources, etc.
Avoid contact with open flame. Do not place naked flame sources, such as lighted candles, on the product. Keep the product in a dry environment.
Do not expose the product to dripping or splashing water. Do not place water containers, such as vases, on the product.
Do not place heavy objects on the product. Do not subject it to shocks, falls or other mechanical damage.
Do not disassemble the product. Attempting to modify the power bank may damage the product and result in a serious injury.
Do not use the product if it is damaged or emits a suspicious odour.
Use only a soft, clean, dry cloth to clean the surface. Do not use harsh or chemical cleaners, petrol, thinners, etc.

This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, you household waste disposal service provider, or the shop where you purchased the item.