Heritage Audio HA-73X2 Dual Channel Microphone Preamp User Manual

: June 9, 2024
: Heritage Audio

Table of Contents

INTRODUCTION
Package Contents
DESCRIPTION
GETTING STARTED
**REAR
APPLICATIONS
SPECIFICATIONS
TROUBLE SHOOTING
WARRANTY STATEMENT
REGISTRATION
RECALL SHEETS
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Heritage Audio HA-73X2 Dual Channel Microphone Preamp User Manual

INTRODUCTION

Thank you for choosing the Elite Series HA-73X2. Heritage Audio is dedicated to bringing you ´the sound of yesterday for tomorrow´. We specialize in capturing that unique, enticing sound that everybody has fallen in love with. For years engineers, producers and musicians have been yearning for that classic vibe. Usually the only option is to search for old, used original equipment that is almost always in a questionable state of operation. This brings with it a whole lot of other issues, making the experience less than desirable. Not to mention the very high prices asked for this equipment, which makes them virtually unobtainable for the great majority. Now it´s possible to obtain that same sound with a brand new piece that will give you all the problem-free, heavy-duty use you´ll need for years of music making history

Peter Rodriguez
CEO
Heritage Audio – Madrid, Spain

© 2022 Heritage Audio S.L. is the sole owner of the copyright of all information and drawings contained in this manual which are not to be copied or reproduced by any means or disclosed in part or whole to any third party without written permission.

Heritage Audio reserves the right to alter specifications without notice. The information in this manual has been carefully checked and is believed to be accurate at the time of publication. However, no responsibility is taken by us for inaccuracies, errors or omissions nor any liability assumed for any loss or damage resulting either directly or indirectly from use of the information contained within it.

Package Contents

DESCRIPTION

The HA-73X2 Elite single channel microphone preamp is made to the same specifications as the acclaimed 73 JR II and DMA 73 Heritage Audio models at an unheard of price.

Using the expertise and reputation obtained with its popular time-consuming hand soldered series, Heritage Audio is able to offer a zero compromise, high quality yet very affordable alternative to the growing entry-level brands.

A combination of lean manufacturing, modern construction techniques and mass production, minimizes hand labor and therefore its high associated costs when manufacturing takes place in Western Europe. By passing the savings straight into the end users´ pockets, Heritage Audio releases the most affordable outboard preamps and equalizers in its class up to date.

Key components to obtain a true vintage sound are indeed maintained, like the industry standard Carnhill transformers, hand wound in St Ives, England.

Manufactured in the same Spanish facilities as the rest of the Heritage Audio line of products, the rack mountable HA-73X2 Elite presents the classic sounding recording preamp that, for generations, has been regarded for its rich, musical qualities and its ability to dramatically improve the sound of almost any source.

Further, it includes the same exact great sounding JFET DI circuit found in the 73 JR II and a fully discrete class A high pass filter.

With 80 dB of available gain and dedicated mic, line, and instrument inputs; the HA-73X2 Elite has everything you need to bring microphones and instruments to life with vintage vibe and thickness.

The HA-73X2 Elite features gain, output trim, -20db pad, polarity reverse, a high pass filter, and +48 V phantom power. It comes housed in a rugged 1RU British steel chassis and utilizes an external power supply for low noise operation. The HA-73X2 features Cornhill input and output transformers, high quality pots and switches, and best of all is 100 % made by Heritage Audio.

GETTING STARTED

FRONT

1	2	3	4	5
D.I. INPUT High Impedance Class A JFET	INPUT GAIN SWITCH 5 dB Steps
From 30 to 80	MIC PAD 20 dB Reduction Ahead of Input Transformer
PHANTOM POWER Activates 48 V	HIGH PASS FILTER -3 dB at 82 Hz,

Discrete Class A
6| 7| 8| 9| 10
---|---|---|---|---
OUTPUT ATTENUATOR Attenuates from 0 to Infinity| MIC INPUT IMPEDANCE 1200 Ω or 300 Ω when pressed| LINE Switches from MIC/D.I. to Line| PHASE Flips phase 180º| POWER Activates Unit

**REAR

REAR **

1	2	3	4
POWER INPUT To Be Connected to the HA PSU04 Power Supply	**LINE
OUTPUT** Male XLR Connector	LINE INPUT Female XLR Connector	**MIC

INPUT** Female XLR Connector

GETTING STARTED

APPLICATIONS

MIC

D.I.

LINE

SPECIFICATIONS

Microphone input impedance: High=1200 Ω minimum; Low: 300 Ω minimum. Higher gain positions gradually have greater impedances, optimum for low gain ribbon mics. Input is transformer balanced and floating.
Line input impedance: 10 kΩ bridging, transformer balanced and floating.
Output impedance: Less than 75 Ω, transformer balanced and floating, to drive a load of 600 Ω.
D.I. input impedance: Greater than 2 MΩ, unbalanced.
Maximum output: Greater than +26,5 dBu into 600 Ω (internally terminated).
THD: Less than 0,025 % at 1 kHz, Less than 0,05 % at 100 Hz.
Frequency response: 20 Hz (+0,3 dB) to 20 kHz (-0,2 dB).
Maximum Gain: Slightly greater than 80 dB.
Equivalent Input Noise: Less than -125 dBu.
Output stage noise: Less than -100 dBu.
Power consumption: Less than 260 mA @ 48 V DC.
Dimensions (W x H x L): 482 mm x 44 mm (1 Rack unit) x 184 mm.

SIGNAL FLOW

TROUBLE SHOOTING

PROBLEMS	SOLUTIONS
There doesn´t appear to be any signal at all arriving at the back XLR.	Make

sure the GAIN knob is not in the ´Off´ position.
There still doesn´t appear to be any signal at all arriving at the back XLR.| Check to see if a jack cable has been left plugged into the front panel D.I.
Even at the lowest position on the GAIN knob I still have too much gain.| When this happens you should activate the PAD button. This will reduce the input by 20 dB ahead of the input transformer.
Condenser microphones don´t seem to work with HA-73.| Make sure the red +48 V button is pressed in to activate the phantom power sent to the microphone.
There doesn´t seem to be any output at all from the unit.| Check to see if the OUTPUT knob is fully turned down as this will attenuate the signal completely.
Sending a signal to the unit from a DAW overloads it terrible.| It is necessary to press the LINE button when sending it a line level source.
If not, it is expecting a Microphone signal with a very different impedance.

For any further doubts or questions please get in contact with us at: support@heritageaudio.com

WARRANTY STATEMENT

LIMITED 2 YEAR WARRANTY

Heritage Audio HA-73X2 is warranted by Heritage Audio SL to be free from defects in materials and workmanship for the period of 2 years to the original purchaser. In the event of such defects, the product will be repaired without charge or, at our option, replaced with a new one if delivered to Heritage Audio prepaid, together with a copy of the sales slip or other proof of purchase date. The warranty excludes problems due to normal wear, abuse, shipping damage or failure to use the product in accordance with the specifications.

Heritage Audio shall not be liable for damages based upon inconvenience, loss of use of the product, loss of time, interrupted operation or commercial loss or any other damages, whether incidental, consequential or otherwise.

This warranty is not transferable.

Heritage Audio and the Heritage Audio “H” logos are registered Trademarks owned and/or licensed by Heritage Audio