ambrane Flex SmartWatch User Manual
- June 9, 2024
- AMBRANE
Table of Contents
ambrane Flex SmartWatch
Welcome
Thank you for purchasing the Ambrane Flex smartwatch. we recommend you to read
the instruction manual carefully before using the product.
Package Contents
- 1N Ambrane Flex
- 1N User Manual Scan Card
- lN USB Magnetic Charging Cable
- lN Rating Card
Product Overview
Turning the Watch ON
To turn the watch on, press the key on the right side of the watch for 4 to 5
seconds.
NOTE: The smart watch must be charged before initial use. You can wake
the screen by lifting your wrist. Enable the feature on the app to use.
Charging the Watch
- Turn the watch over, align and attach the charging pins to the magnet gold prongs.
- You will see the charging icon on the watch screen after 5 seconds.
- Complete charging may take up to 2 hours. The battery icon would change to full after the charging is complete.
- Please clean the charging interface before charging to avoid erosion of the gold prongs and other risks.
Download and install the App by the name of “”
You can set up the Smartwatch through the “Da Fit” app for iOS or Android
devices. Scan the QR code from your watch to get Da Fit in your app store.
DO NOT PAIR THE WATCH DIRECRY WITH BLUETOOTH IN YOUR PHONE’S SETTINGS,
Pairing Instructions
-
Turn on Bluetooth on your smartphone.
-
After installing the Da Fit app on your smartphone, register and log into your account as per the instructions on the screen.
-
Ensure that the smartwatch and smartphone are kept near each other.
-
Continue following the onscreen instructions to connect or pair your smartwatch to your smartphone.
Open App > Device > Add a new device > Choose Fit Shot Flex. -
Select the Bluetooth name Fit Shot Flex from the list. The watch will show a pairing notification, click on o to confirm pairing. Note: Device should have at least android 5.0+ or iOS 11.0+ and above. The watch can only be paired with one smartphone at a time. To pair any other smartphone, please unbind the currently connected smartphone before pairing.
Synchronize Data
In daily wear, the watch can detect and record all kinds of data. The user
needs to connect the smartwatch with Bluetooth on the app and enable to
synchronize.
Note: To prevent data loss, please synchronize the watch at least once
every 7 days.
Watch Faces
Your Ambrane Flex comes with 5 different watch faces for you to choose from.
Once you pick your favourite theme, your home screen will display the date,
time, week, weather, steps you take, battery status and connection status.
Long press the screen, swipe to choose and click to confirm.
Custom Watch Faces: Open the app> Go to Device> Click on Watch Face. Now,
choose Watch Face 5 to edit or add your favorite picture in the watch
wallpaper and you can download more watch faces by clicking on the Discover
More Dials.
Exercise Modes
Go to the Training Mode to choose different Training Modes. There are a total of 8 training modes on the Flex watch.
During Sports
- To Pause: Short press the right key
- To End: Short press the right key
Heart Rate 
Tap on the icon to
measure your heart rate. Wear the watch on your wrist, keep it close to your
heart,and stay still.
NOTE: Measurements are for reference only and not for medical purposes.
Blood Pressure 
Click on the blood
pressure monitor icon to check your diastolic/ systolic blood pressure.
NOTE: Measurements are for reference only.
Steps, Distance & Calorie Monitor 
You can view daily records of steps, distance and calories
on the app as well as your smart watch. The data will be cleared at the end of
everyday
NOTE: All records will be available on the App if you keep it synchronized.
Sleep Monitor 
Tap on the icon to
review sleep data of the previous night.
Once the asleep criteria is met, your watch Flex will start recording from 8
pm at night to 12 pm in the afternoon the next day.
Once you lie down and watch detects no movement for 30 Minutes, it will start
recording, and will stop recording if it detects excessive movements.
You can check the data on the app only after the awake criteria is met.
Blood Oxygen Level Monitor 
Wear the watch on your wrist, then click on the icon to
start measurements. You can also view the data on the app.
NOTE: Measurements are for reference only and not for medical purposes as this is not a medical grade equipment.
Alarm Set the alarm in the app and sync to the watch. You can set up a maximum of 3 alarms at a time.
Weather It shows you the weather forecast when you connect the watch with the app.
Music Control Mode Tap on this icon to launch music control mode.
NOTE: Ensure the music app is running on your phone for this feature to
work properly. This feature might not work for some of the Music Apps with
different control protocols.
Breath Training Mode Tap on the icon, Tap to start breath mode and then focus on your breath.
Stopwatch Tap on this icon to use the stop watch.
Camera Control Mode Click on the remote camera icon on your watch Flash
to click a photo from your phone.
NOTE: For both android & 105, you need to turn on the camera from the App
and trigger from the watch.
Flashlight Tap on the icon to turn your screen into a flashlight when in need.
Countdown Mode Tap on the icon and select time modes (1 min, 3 min, 5 min, 10 min, 15 min, 30 min, 1 hour & 2 hour)
Call and Text Notifications Turn this feature on from your app to receive
notifications on your watch Flex. It will show 7 new notifications and
automatically overwrite the last message if there are more than 7.
NOTE: The watch can be used to reject calls, but cannot be used to answer
calls or messages.
Brightness Click on the brightness icon to adjust brightness levels. To maximize battery life, keep your watch brightness at 0 or 1 .
Theater Mode Slide down and tap on the theater icon to enable or disable vibration mode on the watch.
Reset Go to settings and then tap on the reset icon to reset your watch.
NOTE: All data will be lost.
Turning The Watch Off Press the side button and scroll down and go to settings, Tap on power off.
Swipe Down to access the shortcut menu You can access Find my phone, Vibrator ON/OFF, Flashlight, Theater Mode, Weather, Brightness & Settings from the shortcut menu.
Find My Phone Tap on the icon to make your phone ring. Make sure the app and phone are connected.
Menu View
Flex comes with 2 different menu views ( Grid & List View). You can choose the menu style according to your choice.
Cleaning and Maintenance
- Keep the product clean.
- Keep the product dry.
- Do not wear it too tight.
- Do not use household cleaners to clean the watch. Use a soap-free detergent if you need to clean it.
Safety and Product Information Notes
Battery Warning:
Do not disassemble, pierce or damage the battery. Do not disassemble the
built-in batteries of non-replaceable battery devices. Do not use sharp
objects to remove the battery.
Health Warning:
The watch’s optical heart rate sensor glows green and ashes. If you suffer
from epilepsy or are sensitive to blinking light sources, please consult your
physician to affirm if you can wear this product.
The device tracks your daily activities through sensors. These data are
intended to tell you about your daily activities, such as steps, sleep,
distance, heart rate and calories, but may not be completely accurate.
The device, accessories, heart rate sensors other relevant data are designed
for entertainment and fitness, not for medical purposes. They are not
applicable to the diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate data is for reference only. we are not
responsible for any consequences caused by any data deviation.
Matters Needing Attention
- Watch data needs to be kept once every 7 days to avoid data loss.
- The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquids.
- The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports mode supports up to 6 hours of exercise at a time.
- Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry.
- When your heart rate is measured, keep your arm still during the test.
Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED
BATTER IES ACCOR DING TO THE INSTRUCTIONS
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.
Warranty Terms & Conditions
- All warranty information, product features, and specifications are subject to change without prior notice.
- All matters are subject to Delhi Jurisdiction.
- This smartwatch comes with 365 days warranty from the date of purchase.
- Warranty can not be claimed if the product is damaged by wrong operation or force majeure.
- The accessories (magnetic pin charging cable) which come along with the smartwatch come under a warranty of 90 days.
- The wear-and-tear accessories such as the straps are not covered under warranty.
CUSTOMER CARE:
Ambrane India Pvt. Ltd.
224, Second Floor, D-Mall, Netaji Subhash Place, Delhi; India – 110034 Contact
No.: +91 1145911111,
E-mail: care@ambraneindia.com Web:
www.ambraneindia.com
Join the Ambrane Ally!