Kerlink 923 Wireless Outdoor AP Installation Guide
- June 9, 2024
- Kerlink
Table of Contents
Kerlink 923 Wireless Outdoor AP Installation Guide
Package Content
Interface and Indicators
LED Indicator Instructions
Ports Instructions
Device Installation
Method1. Connect computer to the wireless signal of AP, the default SSID is
“FAP_XXXX”, password is 88888888
Method2. Connect computer to the AP by Ethernet cable.
Step1 . On the computer, please set the static IP under the same subnet with
AP,
Step 2. Please launch a browser such as Google Chrome or Firefox, type into address bar and click on enter to get in the login page of wireless access point. The default login password is “ admin ”.
*Login device
Step 3. After get in the management page, on the left side menu, please go to [Wizard] to setup the access point.
Step 4. Select the appropriate operation mode and follow the instruction of
wizard to finish the settings. If already exist a router in your network,
please choose Fat AP mode;
If not, you can choose Wireless Router mode.
-
Fat AP Mode default Login IP : 192.168.1.100 admin/admin
-
Wireless Router Mode default Login IP: 192.168.11.1 admin/admin
Wuhan MokerLink Technology Co.,Ltd
Rm10,13/F,Main Building 7,Changhang Lanjing International,
No.116 Gaoxin Ave.,Hongshan Dist.,Wuhan,China
http://www.mokerlink.com
support@mokerlink.com
For technical support and other information, please visit http://www.mokerlink.com/support/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>