BONECO P370 Air Purifier Instruction Manual

BONECO P370 Air Purifier

The BONECO P370 Air Purifier is designed to provide clean and fresh air by removing pollutants such as dust, pollen, and smoke.
It features a 24-hour timer, auto mode, and a night mode for convenience. The air purifier also has an ionizer and UV lamp to eliminate bacteria, viruses and germs from the air.

Technical Specifications

• Dimensions: 32 x 22 x 52 cm
• Weight: 4.4 kg
• Airflow: 256 m³/h
• Noise Level: 33 – 53 dB(A)
• Power Consumption: 5 – 55 W
• Room Size: up to 50 m²

Product Usage Instructions

1. Read and save the instructions manual for future reference.

2. Fix the cable using the groove and connect the BONECO P370 to a power outlet.

3. Press the power button to turn on the air purifier.

4. Press the button with a fan symbol to adjust the speed level of the air purifier.

5. To activate the auto mode, press the button with an “A” symbol.
   The air purifier automatically adjusts its speed according to the air quality.

6. To cancel the auto mode, press the “A” button again.

7. Press the “Night Mode” button to activate or deactivate the night mode which reduces noise and turns off the LED display.

8. The 24-hour timer can be set by pressing the timer button and adjusting the time with the speed level button.

9. The ionizer can be turned on and off by pressing the “ION” button.

10. The UV lamp can be turned on and off by pressing the “UV” button.

11. When the AP370 filter needs to be replaced, the “FILTER” symbol will appear on the display. Open the back cover to replace the filter.

12. When the UV lamp needs to be replaced, the “UV” symbol will blink on the display. Turn off the air purifier and open the back cover to replace the UV lamp.

13. When cleaning the air purifier, make sure it is unplugged from the power outlet. Use a soft cloth to wipe the exterior of the air purifier and a vacuum cleaner to remove dust and dirt from the AP370 filter.

By following these usage instructions, you can effectively use the BONECO P370 Air Purifier to improve the air quality in your home or office.

INTRODUCTION

HEALTHY AIR IS A BASIC NEED
There is little to which we react with greater sensitivity than poor air. And yet many people do not pay enough attention to air quality, which has consequences for health and quality of life. This makes us all the more pleased that you have chosen a BONECO appliance to ensure that the basic need for healthy room air is satisfied for you and the people around you.

AVAILABILITY OF ACCESSORIES
You can obtain replacements for spent accessories as well as additional accessories:

• At your BONECO specialist dealer,
• At www.shop.boneco.com or
• Directly via the “BONECO healthy air” app.

ITEMS INCLUDED

OVERVIEW AND PART NAMES

1. Transport handle
2. Display
3. Function buttons
4. Air quality indicator
5. Air outlet
6. UV lamp
7. UV lamp cover
8. AP370 filter
9. Air inlet / rear cover

TECHNICAL DATA

• Mains voltage 220 – 240 V ~ 50 Hz
• Power consumption 48 W**
• Filter performance 240 m3/h (1411 ft³/min)**
• Dimensions L × W × H 225 × 218 × 692 mm (8.86 × 8.58 × 27.24 in)
• Weight (empty) 4.67 kg (10.3 lbs)
• Operation noise level 62 dB(A)
  Subject to change
  @ 230 V ~ 50 Hz

INDICATORS ON THE DISPLAY

BUTTON PANEL ON THE APPLIANCE

STARTING UP AND SWITCHING OFF

AUTO MODE AND MANUAL CONTROL

The BONECO P370 has an Auto mode in which the appliance controls its performance independently.

1. Switch on the BONECO P370.
2. To switch the appliance to Auto mode, tap the AUTO button. The AUTO indicator appears on the display.
3. To exit automatic mode and switch to manual mode, tap the button for the performance level.
   Each time you tap, you switch between the performance levels: I › II › III › I
   The last setting is saved when you switch off the appliance and restored the next time you switch it on. On the other hand, if you disconnect the BONECO P370 from the power outlet, automatic mode will be activated the next time you switch the appliance on.

NIGHT MODE

Night mode deactivates the air quality indicator when the appliance is used in a bedroom, but night mode does not affect the function in any way.

1. Switch on the BONECO P370.
2. To activate night mode, press the on/off switch for five seconds.
3. To switch off night mode, press the on/off switch again for five seconds.

The last setting is saved when you switch off the appliance and restored the next time you switch it on. On the other hand, if you disconnect the BONECO P370 from the power outlet, night mode will be deactivated the next time you switch the appliance on.

24-HOUR TIMER

The BONECO P370 has a 24-hour timer, which is controlled by the hour. After the desired time has elapsed, the appliance is switched off automatically.

1. Switch on the BONECO P370.
2. Press the TIME button repeatedly until the desired number of hours is set.
   After the desired time has elapsed, the BONECO P370 is switched off automatically.

CANCELING THE TIMER
To cancel the timer early, press the TIME button repeatedly until the hours indicator after the 24 indicator goes out.

MEASURING THE AIR QUALITY

The BONECO P370 has an integrated particle sensor that measures the air quality. The result is indicated by the color of the LED under the control panel.

• The air quality is good; no noteworthy air pollution is measured.
• The air is moderately polluted by particles. Increase the performance of the appliance.
• The air is highly polluted by particles.
  Thoroughly ventilate the room and set the BONECO P370 to the maximum performance level.

SWITCHING THE IONIZER ON AND OFF

ABOUT THE IONIZER
The BONECO P370 has a built-in ionizer that can be switched on and off. It outputs negatively charged ions into the air, which attach to the fine dust. The negatively charged fine dust particles attract other particles in the air, so they become too heavy to stay in the air and fall to the floor, where they get wiped up along with the household dust.
The ionizer generates a very low amount of ozone. Do not use the ionizer if someone around you is allergic to ozone.

SWITCHING THE IONIZER ON AND OFF

1. To switch the ionizer on, tap the ION button.
   The ION indicator appears on the display:

2. To switch the ionizer off, press the ION button again.

SWITCHING THE UV LAMP ON AND OFF

ABOUT THE UV LAMP
The BONECO P370 has a built-in UV lamp that can be switched on and off. The lamp’s high-energy properties help remove specific viruses and bacteria.
Thus the UV lamp contributes to the hygiene of your living space.
The UV lamp generates a low amount of ozone. Do not use the UV lamp if someone around you is allergic to ozone.

SWITCHING THE UV LAMP ON AND OFF

1. To switch the UV lamp on, tap the UV button.
   The UV indicator appears on the display:

2. To switch the UV lamp off, press the UV button again.

NOTES ON CARE

CARE INSTRUCTIONS
The BONECO P370 is a low-maintenance appliance,which needs only a very small amount of attention.
Accordingly, it is easy to care for.

Always unplug the BONECO P370 from the power outlet before you start cleaning or doing maintenance! Failure to do so can result in electric shock and fatal injury! When liquid is used,there is a danger of electric shock. Unplug the power plug every time before cleaning.
All parts inside and outside the BONECO P370 are designed for dry cleaning. Use a damp cloth only for removing dirt on the outside.

Interval              Task

• Weekly               Wipe off the appliance with a dry cloth
• Every 2 weeks   Clean the ventilation slots and the AP370 filter with a vacuum cleaner
• As needed         Replace the UV lamp or the filter

CLEANING

CLEANING

1. Disconnect the BONECO P370 from the power outlet.
2. Wipe off the outside of the appliance with a dry cloth.
3. Open the rear cover.
4. Remove coarse dirt and dust from the AP370 filter using a vacuum cleaner.
5. Close the rear cover.
6. Plug the BONECO P370 in at a power outlet.

REPLACING THE AP370 FILTER

ABOUT THE AP370 FILTER
The AP370 filter is consumable and must be replaced after a certain amount of time. The BONECO P370 has an internal timer. After an operating time of 4000 hours, the appliance alerts you to the upcoming filter change with the filter warning on the display:

If you continue to use the spent filter for a longer time, the cleaning output of the BONECO P370 will decrease significantly.
The spent AP370 filter can be disposed of with your regular household waste.

REPLACING THE AP370 FILTER

1. Disconnect the BONECO P370 from the power outlet.
2. Open the rear cover.
3. Remove the spent filter and dispose of it with your household waste.
4. Remove the protective foil of the new filter.
5. Insert the new filter and pay attention to the position of the pin.
6. Close the rear cover.
7. Connect the BONECO P370 to the power outlet.
8. Switch on the BONECO P370.
9. Press and hold the button for the performance control for about 5 seconds until the filter warn-ing on the display goes out.

REPLACEMENT FILTERS
You can obtain the AP370 filter from your BONECO specialist dealer or the BONECO online store at www.shop.boneco.com.

REPLACE THE UV LAMP

ABOUT THE UV LAMP
The UV lamp is a consumable and must be replaced after a certain amount of time. The BONECO P370 has an internal timer. After an operating time of 12,000 hours, the appliance alerts you to the upcoming lamp change with the UV warning on the display:

If you continue to use the spent UV lamp for a longer time, the effectiveness of the disinfection will decrease significantly.
Only touch the new UV lamp at the ends. Touching the glass tube can shorten the service life.

REMOVING A USED UV LAMP

1. Disconnect the BONECO P370 from the power outlet.
2. Open the rear cover.
3. Wait 5 minutes and let the used UV lamp cool down.
4. Remove the filter.
5. Unscrew the four screws to remove the cover of the UV lamp.
6. Simultaneously hold both ends of the used UV lamp and rotate them clockwise until the lamp can be removed.

INSERTING A NEW UV LAMP

1. Remove the new UV lamp from the packaging and make sure you only touch the ends of it.
2. Insert both ends into the BONECO P370 and rotate the UV lamp counterclockwise as far as it will go.
3. Make sure the holder is fastened correctly.
4. Put the appliance back together by following the steps in reverse order.
5. Connect the BONECO P370 to the power outlet.
6. Switch on the BONECO P370.
7. Press and hold the button for the performance control for about 5 seconds until the UV warning signal on the display goes out.

REPLACEMENT UV LAMP
You can obtain a new UV lamp from your BONECO specialist dealer or the BONECO online store at www.shop.boneco.com.

DISPOSING OF A UV LAMP
Contact your local waste disposal authority to get instructions about recycling and proper disposal of the old lamp.
Do not throw your used lamp in the household waste. Objects containing mercury must be disposed of in accordance with the applicable laws and regulations of your place of residence.
If the UV lamp breaks, switch off the appliance.
Do not operate the appliance with a broken lamp. Do not use a vacuum cleaner to remove broken pieces. Sweep the debris into a plastic bag and dispose of it properly.

www.boneco.com

BONECO is a registered trademark of BONECO AG, Switzerland
BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland

References

• BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
• BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
• BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>