PSXXXL8GFH-18-VNH Phono Solar Draco 415 Wp Instruction Manual
- September 17, 2024
- PHONO
Table of Contents
PSXXXL8GFH-18-VNH Phono Solar Draco 415 Wp Instruction Manual
Installation instruction
For module:
PSXXXL 8 GFH-18/VNH;
Screw fitting: Use corrosion-proof screws in the existing installing
holes in the module frame. Each module has 8 mounting holes for securing the
module on the mounting rail. The module frame must be attached to a mounting
rail using M8 corrosion-proof screws together with spring washers and flat
washers in symmetrical locations on the module. The applied torque should be
16~20Nm.
Clamp fitting: The module clamps should not come into contact with the front glass and must not deform the module frame. Avoid any shadowing effects from the module clamps. The module frame cannot be modified under any circumstances. Regardless of the orientation chosen, at least 4 clamps must be used on each module. Depending on the local wind and snow loads, additional clamps may be required. The applied torque should be about 16~20Nm:
Phono Solar Technology Co., Ltd
1 Xingu Road, Nanjing Hi-tech Zone, Nanjing, China PC: 210032
Tel : +86 25 58642759 Fax: +86 25 58638009
Web: www.phonosolar.com
E-mail : info@phonosolar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>